Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in
all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance,
merchantability, or tness for a particular purpose.
PLANET has made every effort to ensure that this User’s Manual is accurate;
PLANET disclaims liability for any inaccuracies or omissions that may have
occurred.
Information in this User’s Manual is subject to change without notice and does
not represent a commitment on the part of PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User’s Manual.
PLANET makes no commitment to update or keep current the information
in this User’s Manual, and reserves the right to make improvements to this
User’s Manual and/or to the products described in this User’s Manual, at any
time without notice.
If you nd information in this manual that is incorrect, misleading, or incomplete, we would appreciate your comments and suggestions.
FCC Warning
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the Instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
Revision
PLANET Gigabit Ethernet Switch User’s Manual
FOR MODELS: GSD-800/GSD-1600
Rev: 1.0 (July. 2005)
Part No.: 2010-A35030-000
Table of Contents
Chapter 1 INTRODUCTION 1
1.1 PACKAGE CONTENTS 1
1.2 HOW TO USE THIS MANUAL 1
1.3 PRODUCT FEATURES 2
1.4 PRODUCT SPECIFICATIONS 2
Chapter 2 INSTALLATION 3
2.1 PRODUCT DESCRIPTION 3
2.1.1 Product Overview 3
2.1.2 GSD-800/GSD-1600 Front Panel 3
2.1.3 LED Indicators 4
2.1.4 GSD-800/GSD-1600 Rear Panel 4
2.2 INSTALLING A GSD-800/GSD-1600 5
2.2.1 Desktop Installation 5
Chapter 3 SWITCH OPERATION 7
3.1 ADDRESS TABLE 7
3.2 LEARNING 7
3.3 FORWARDING & FILTERING 7
3.4 STORE-AND-FORWARD 7
3.5 AUTO-NEGOTIATION 8
Chapter 4 TROUBLESHOOTING 9
Appendix A 11
A.1 1000MBPS, 1000BASE-T 11
A.2 10/100MBPS, 10/100BASE-TX 11
Chapter 1
INTRODUCTION
1.1 Package Contents
Check the contents of your package for following parts:
● Gigabit Ethernet Switch x1
● User’s manual x1
● Power cord x1
If any of these are missing or damaged, please contact your dealer immediately, if
possible, retain the carton including the original packing material, and use them against
to repack the product in case there is a need to return it to us for repair.
1.2 How to Use This Manual
This Gigabit Ethernet Switch User Manual is structured as follows:
● Section 2, Installation
It explains the functions of GSD-800/GSD-1600 and how to physically install the GSD-800/GSD-1600.
● Section 3, Switch operation
It explains the switch operation of GSD-800/GSD-1600.
● Section 4 Troubleshooting
It contains troubleshooting of GSD-800/GSD-1600.
● Appendix A Switch’s RJ-45 Pin Assignments
It contains cable information of GSD-800/GSD-1600.
1.3 Product Features
• Comply with IEEE802.3, 10Base-T, IEEE802.3u, 100Base-TX and IEEE802.3ab,
1000Base-T
• IEEE802.3x, full-duplex flow control compliant; back-pressure, half-duplex
• 144/272KB packet buffer and 8K MAC address table, auto-ageing
• Support 9K jumbo packet
• Per port Auto-MDI / MDI-X detection
1
3
• Non-blocking, Store and Forward switching architecture
• Automatic source address learning and aging
• 10”, 1U height rack mounting size
• 100~240VAC, 50~60Hz, 0.5A universal power input
1.4 Product Specications
Model GSD-800GSD-1600
Hardware Specification
10/100/1000 ports 816
Dimensions217 x 135 x 43.5 mm (1U height)
Weight0.95kg1.7 kg
Power Requirement100~240 (±10%) VAC, 50-60 (±3) Hz
Power Requirement7.5 watts & 25 BTU/hr16.8 watts & 57 BTU/hr
Switch Specification
Switch architectureStore-and forward
Address Table8K entries, auto learning/ageing
Shared data Buffer144 KB packet buffer, 272KB packet buffer
Flow Control Back pressure for half duplex, IEEE 802.3x for full
duplex
Packet Control Runt & CRC filtering, Broadcast storm control
Switching Fabric16Gbps32Gbps
Switch Throughput11.9Mbps23.8Mbps
Standards Conformance
Network StandardsIEEE802.3 (Ethernet),
IEEE802.3u (Fast Ethernet)
IEEE802.3ab (Gigabit Ethernet)
IEEE802.3x (Flow control)
Operating Temperature
Storage Temperature
Humidity10% to 90% (Non-condensing)
Regulation ComplianceFCC, CE
0~50ºC
-40~70ºC
2
Chapter 2
INSTALLATION
This section describes the functionalities of GSD-800/GSD-1600’s components and guides
how to install it on the desktop or shelf. Basic knowledge of networking is assumed. Please
read this chapter completely before continuing.
2.1 Product Description
The PLANET GSD-800/GSD-1600 provides 8/16 Gigabit Ethernet Switch ports. The
PLANET GSD-800/GSD-1600 delivers eight/sixteen ports worth of high-performance,
feature-rich integrated Gigabit Ethernet switching over traditional copper cabling. Each
port supports 10Mbps, 100Mbps, and 1000Mbps as well as half/full mode and can be
easily connected to corporate backbones and servers.
2.1.1 Product Overview
PLANET GSD-800/GSD-1600 is a gigabit Ethernet switch with 8/16 RJ-45 10/100/
1000Mbps ports for high-speed network connectivity. The GSD-800/GSD-1600 can also
automatically identify and deter-mine the correct transmission speed and half/full duplex
mode of the attached devices with its 8/16 ports. The Gigabit ports with 9K jumbo packet
support can handle large amounts of data transmission in a secure topology linking to a
backbone or high-power servers.
The GSD-800/GSD-1600 also supports store-and-forward forwarding scheme to ensure
low latency and high data integrity, eliminates unnecessary trafc and relieves congestion
on critical network paths. With an intelligent address recognition algorithm, GSD-800/
GSD-1600 could recognize up to 8K different MAC address and enables ltering and
forwarding at full wire speed.
2.1.2 GSD-800/GSD-1600 Front Panel
Figure 2-1 & 2-2 shows a front panel of GSD-800/GSD-1600.
Figure 2-1 PLANET GSD-800 Front Panel
Figure 2-2 PLANET GSD-1600 Front Panel
3
Loading...
+ 9 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.