Planet Technology FSD-804P User Manual

8-Port 10/100Mbps with 4-Port PoE Ethernet Switch

Key Feature

FSD-804P

Data Sheet

For cost saving and flexible using of PoE power provision, half of the

10/100Mbps TP ports of FSD-804P provide PoE power injector function

which is able to drive 4 IEEE 802.3af compliant powered devices.

For SOHO or department network, the Switch also provides a simple,

cost-effective, and highly reliable network connection for data as well as

power. Furthermore, it is the ideal device for bridging Ethernet to Fast

Ethernet workgroups or networks.

With data and power over Ethernet from one unit, the FSD-804P shall

reduce cables and eliminates the need for dedicated electrical outlets on

the wall, ceiling or any unreachable place. A wire carries both data and

power lowering the installation costs, simplifying the installation effort and

eliminating the need for electricians or extension cords. We are also proud

of the key feature – energy saving. With more efficient switching power

supply, the efficiency of the FSD-804P would be much better than four

linear power adapters in a long run.

Providing 4 PoE interfaces, the FSD-804P is ideal for small business and

workgroups requiring to deploy the PoE for the wireless access points,

IP-based surveillance camera or IP phones in any places easily, efficiently

and cost effective.

• 8-Port 10/100Mbps Fast Ethernet ports

• 4-Port support 48VDC power to PoE Powered Device.

• Hardware based 10/100Mbps auto-negotiation.

• Flow control for full duplex operation and back pressure for

half duplex operation

• Integrated address look-up engine, support 2K absolute MAC

addresses

• Automatic address learning and address aging

• Supports Auto MDI/MDI-X function

• LED indicators for easy network diagnostic

• Ethernet standards comply with IEEE 802.3 Ethernet, IEEE

802.3u Fast Ethernet, IEEE 802.3x Flow Control and IEEE

802.3af Power over Ethernet.

• EMI standards comply with FCC Class A, CE

PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property or their respective owners. Copyright©2007 PLANET Technology Corp. All rights reserved.

11-07 C-FSD804P-2

PLANET Technology Corporation

11, No. 96, Min Chuan Road, Hsin Tien, Taipei, Tawian R.O.C. Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 Email: sales@planet.com.tw www.planet.com.tw VoIP Gateway: vip.planet.com.tw

8-Port 10/100Mbps with 4-Port PoE Switch

FSD-804P

8-Port 10/100Mbps with 4-Port PoE Switch

Rack-mount kit for 10-inch cabinet

Rack-mount kit for 19-inch cabinet

IEEE 802.3af Power over Ethernet Splitter with 5V DC output

IEEE 802.3af Power over Ethernet Splitter with 9V DC output

IEEE 802.3af Power over Ethernet Splitter with 12V DC output

8-Port 10/100Mbps with 4-Port PoE Ethernet Switch

Product

Specification

Applications

Or der ing Inf ormation

Data Sheet

FSD-804P

Model

Hardware Specification

Network Connector PoE Inject Port PoE Output power budget LED Display Switch Architecture Switch Fabric MAC Address Throughput Remote power feeding

Power Power Consumption Dimension (W x D x H) Weight

Standard Conformance

EMI Safety Operating environment Storage environment Operating Humidity Storage Humidity Standard Compliance

FSD-804P

8-Port RJ-45 for 10/100TX 4-Port with PoE injector function, Port-1 to Port-4 55 Watts One power, 1-4 port PoE in-use, LNK/ACT, 100, 5-8 port LNK/ACT, 100 Store and forward switch architecture

1.6Gbps 2K MAC address table with Auto learning function

1.19Mbps End-point insert type and compatible with IEEE 802.3af Per port feeding power: 48V DC, 15.4W, 350mA (Maximum) (Pin 1, 2, 3, 6) AC 100~240V, 50/60Hz, Max. 65 watts / 221 BTU 217 x 135 x 43 mm

1.0 kg

FCC Class A, CE 0~40 degree C, 10%~95%RH

-40 ~70 degree C, 95% RH 5% to 90% , relative humidity, non-condensing 5% to 90% , relative humidity, non-condensing IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet

Department/ Workgroup PoE Switch

Providing up to 4 PoE, in-line power interfaces, the Switch can easily build a power central-controlled IP phone system, IP Camera system, AP group for the enterprise. For instance, 4 camera / AP can be easily installed around the corner in the company for surveillance demands or build a wireless roaming environment in the office.

Without the power-socket limitation, the Switch makes the installation of cameras or WLAN AP more easily and efficiently.