Planet Technology FSD-804P User Manual
Trademarks
Copyright PLANET Technology Corp. 2005.
Contents subject to which revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trade-
marks belong to their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in
all environments and applications, and makes no warranty and representa
tion, either implied or expressed, with respect to the quality, performance,
merchantability, or fitness for a particular purpose.
PLANET has made every effort to ensure that this User’s Manual is accurate;
PLANET disclaims liability for any inaccuracies or omissions that may have
occurred.
Information in this User’s Manual is subject to change without notice and does
not represent a commitment on the part of PLANET. PLANET assumes no re
sponsibility for any inaccuracies that may be contained in this User’s Manual.
PLANET makes no commitment to update or keep current the information
in this User’s Manual, and reserves the right to make improvements to this
User’s Manual and/or to the products described in this User’s Manual, at any
time without notice.
If you find information in this manual that is incorrect, misleading, or incom
plete, we would appreciate your comments and suggestions.
FCC Warning
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment gen
erates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the Instruction manual, may cause harmful interfer
ence to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be
required to correct the interference at whose own expense.
-
-
-
-
-
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
WEEE Warning
To avoid the potential effects on the environment and human health
as a result of the presence of hazardous substances in electrical and
electronic equipment, end users of electrical and electronic equipment
should understand the meaning of the crossed-out wheeled bin symbol.
Do not dispose of WEEE as unsorted municipal waste and have to col
lect such WEEE separately.
Revision
PLANET Fast Ethernet Switch with 802.3af injector built-in User’s Manual
FOR MODEL: FSD-804P
Rev: 1.0
Part No. 2010-A31110-000
-
Table of Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 How to Use This Manual
1.3 Product Features
1.4 Product Specifications
Chapter 2 Installation 5
2.1 Product Description 5
2.2 Installing a FSD-804P
Chapter 3 Switch Operation
3.1 Address Table 7
3.2 Learning 7
3.3 Forwarding & Filtering 7
3.4 Store-and-Forward 7
3.5 Auto-Negotiation 8
Chapter 4 Trouble Shooting 9
APPENDIX A
10
A.1 Switch‘s RJ-45 Pin Assignments 10
A.2 10/100Mbps, 10/100Base-TX
6
10
1
2
3
Chapter 1
INTRODUCTION
1.1 Package Contents
Open the box of the Switch and unpack it carefully. The box should contain the following
items:
● The Switch
● Power Cord x 1
● User s Manual x 1
If any item is found missing or damaged, please contact your local reseller for replacement.
Please retain the carton including the original packing material, and use them against to
repack the product in case there is a need to return it to us for repair.
1.2 How to Use This Manual
This Ethernet Switch User Manual is structured as follows:
Chapter 2 Installation
This chapter explains the functions and how to physically install the FSD-804P.
Chapter 3 Switch Operation
This chapter explains the switch operation of FSD-804P.
Chapter 4 Trouble Shooting
This chapter contains troubleshooting of FSD-804P
Appendices
This chapter contains cable information of FSD-804P.
1.3 Product Features
● 8-Port 10/100Mbps Fast Ethernet ports
● 4-Port support 48VDC PoE power to IEEE802.3af compliant Powered Device
● Hardware based 10/100Mbps auto-negotiation
● Flow control for full duplex operation and back pressure for half duplex operation
● Integrated address look-up engine, support 2K absolute MAC addresses
1
● Automatic address learning and address aging
● Supports Auto MDI/MDI-X function
● LED indicators for easy network diagnostic
● Comply with IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet, IEEE802.3x Flow
Control and IEEE802.3af Power over Ethernet
● EMI standards comply with FCC, CE class B
2
Loading...