Planet Technology FNSW-8086F, FNSW-8088F User Manual

NOVASwitch Series
FNSW-8086F FNSW-8088F
Fast Ethernet Fiber-optic Switch
Copyright PLANET Technology Corp. 2002. PLANET is a registered tra demark of PLANET Technolo gy
Corp. The information in this manual is subject to change without notice. All other trademarks belong to their respective owners.
Contents subject to revision without prior notice.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuan t to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environmen t. This equipment generates, uses, and can radi ate radio f requency energy and, if not installed and used in accordance with the Instruction manual, may caus e harmful interferenc e to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Reversion
This user's manual is for PLANET NOVASwitch Series model -- FNSW-8086F / FNSW-8088F Rev: 2.0 (Feb, 2002)
Part No: EM-8088fv2
ii
NOVASwitch Series
Preface
This manual describes how to install a nd use the pr ovided Fast Ethernet Switch, which features eight ports 100BASE-FX Multi-mode fiber ports, six ports 100BASE­FX plus two ports 10/100BASE-TX switching is also available for this product series.
To get the most out of this manual, you should have an understanding of networking concepts such as bridging, IEEE 802.3 Ethernet and 100BASE-TX Fast Ethernet, and local area networks (LANs).
For more information about these topics, please refer to the Appendix.
Chapter Overview
Introduction
A general overview of switching benefits and the
features of the Switch this manual accompanied with.
Installation
Everything you need to know to install and configure th e
Switch with your network.
Specifications
The Switch’s specifications at a glance.
Connector Pinouts
See Appendix A for more information.
Introduction to LAN & Ethernet Technologies
See Appendix B for more information.
FNSW-8086 / 8088F User's Manual
iii
Table of Contents
CHAPTER 1. INTRODUCTION.................................................5
B
ENEFITS OF SWITCHING
E
IGHT PORTS FIBER-OPTIC ETHERNET SWITCH
P
RODUCT FEATURES
P
ACKING LIST
F
RONT PANEL
Ports............................................................................................8
LED Indication.........................................................................10
CHAPTER 2. INSTALLATION ................................................13
S
ELECTING A SITE FOR THE SWITCH
C
ONNECTING TO POWER
C
ONNECTING TO YOUR NETWORK
CHAPTER 3. SPECIFICATIONS.............................................16
APPENDIX A - CONNECTOR PINOUTS..............................18
APPENDIX B – INTRODUCTION TO LAN & ETHERNET
.................................................................................8
.................................................................................8
TECHNOLOGIES .........................................19
...............................................................5
...........................6
......................................................................7
............................................13
..............................................................14
..............................................14
iv
NOVASwitch Series
Chapter 1. Introduction
Benefits of Switching
Ethernet switching technology has dramatically boosted the total bandwidth of a network. It puts configuration flexibility and bandwidth adaptability into the local workgroups where the majority of work is generated.
It further eliminates congestion problems inherent to the CSMA/CD protocol and improves predictable response time under heavy network loads. Expensive routing equipment was used in the pas t to reduce the congestion under heavy loads.
The new wave of object-oriented client and server applications demands higher bandwidth and tighter integration of client work stations with servers. The old shared-access Ethernet technology provides neither enough bandwidth nor predictable response time for this new wave of workgroup computing.
Fast Ethernet switching not only satisfies both technical and business requirements, but also p reserves the user’s
existing investment in the huge 10BASE-T Ethernet installed base.
This compatibility ensures a path for users to add, c hange , and migrate to Fast Ethernet as demands emerge. It also provides a low cost and flexible bandwidth so lution dire ctly to local workgroups where the majority of work is generated, reducing the need for expensive network equipment.
FNSW-8086 / 8088F User's Manual
5
Eight Ports Fiber-Optic Ethernet Switch
The FNSW-8088F has eight multi-mode fiber ports. And for FNSW-8086F, it has 6-port 100BASE-FX ports and 2­port 10/100BASE-TX ports.
This switch makes it possible to join a 100Mbps Fast Ethernet network to an existing 1 0Mbps Ethernet network (FNSW-8086F). Its internal cache buffers the traffic from the higher bandwidth 100Mbps segment to the 10Mbps segment. If you later decide to make both segments 100Mbps Fast Ethernet, the ports of the switch will automatically sense the change and adjust to 100Mbps operation.
In addition to the benefits of integrating 10Mbps and 100Mbps networks through TP ports, this switch is also useful for segmenting networks that is bogged down with excess traffic as a fiber-optic switching backbone. By splitting a network into several segments and bridging them, you can cut the traffic load on your network and reduce collisions on each segment, especially if you can minimize intersegment traffic by placing users and devices that normally talk to each other on the same segment.
This switch fully complies with IEEE802.3u, 100BASE-TX, 100BASE-FX, and IEEE802.3, 10BASE-T standards. It features "wire-speed” switching mechanisms as well as the ability to filter local traffic, collisions, and error pack ets to maximize network performance.
This eight-port switch also facilitates an affordable and efficient migration path to 100Mbps Fast Ethernet and can continue to enhance your network's performance even if
6
NOVASwitch Series
you upgrade your existing network with standar d Ethernet applications, internetworking systems and client-side adapters to minimize migration costs.
Product Features
This eight-port switch provides the following features:
FNSW-8088F provide eight 100BASE-FX switching
ports (ST Interface)
FNSW-8086F provide two-port 10/100BASE-TX,
with six-port 100BASE-FX for multiple choice of TP wiring
Full-duplex support on each port (default) for up to
2Km wiring
DIP Switch for Full- and Half-Duplex setting on
Fiber ports.
Designed in compliance with IEEE 802.3,
10BASE-T and IEEE802.3u, 100BASE-TX and 100BASE-FX standards.
Comprehensive array of LED indicators that
communicate the status of the switch and troubleshooting information.
Dynamic learning mode that automatically adjusts
to the network configuration.
Runt and CRC filtering eliminates erroneous
packets to optimize network bandwidth.
Full compatibility with standard Ethernet
applications, internetworking systems and client-side adapters to minimize migration costs.
FNSW-8086 / 8088F User's Manual
7
Loading...
+ 16 hidden pages