M ini Dome Camera – CAM-DM33
Packet Content
CAM-DM33
Screw kit * 1
Installation
1. Please fix the CAM-DM33 to a suitable location with the Screw Kit.
2. Open the protect cover and adjust the camera to the correct direction, then closed.
3. Connect Video Output connector to your DVR.
4. Connect a 12V DC/800mA power adapter to the Power Input connector.
Specification
Image Pick-up Device SHARP 1/4“ CCD Normal Resolution
Effective Picture Elements NTSC: 510*492, PAL: 500*582 (H*V)
Horizontal Resolution 330 TV lines
Minimum Illumination 0.2 LUX @ F2.0
S/N Ratio More than 48 dB
Auto Electronic Shutter NTSC:1/60s~1/100,000s, PAL:1/50s~1/110,000s
Gamma Characteristic 0.45
Lens Furnished Board lens 3.6mm / F2.0(optional:2.5/4.3/6.0/8.0/12/16mm)
Gain Control
White Balance
Synchronous System Negative sync. Internal
Video Output 1 Vp-p Composite Video / 75 Ohms.
Power Supply DC 12V / 800 mA
Operating Temp.
Dimensions
Automatically
Automatically (2500K~9500K)
-10℃ to 50℃ (14℉ to 122℉)
73 mm(Φ) X 53 mm(H)
2011-AB3490-000