Planet Audio PI9758B User Manual
PI9758B 02.2011
13
PI9758B
00
Contents
1
1
Before You Start
Important Safeguards 4
About this manual 4
Precautions 5
Maintenance 6
Location & function of the controls 7
Remote control 9
Specifications 11
2
Installation
Wiring Connections 12
Install the Unit 13
Detach the Unit 15
Install the Front Panel 16
Detach the Front Panel 16
clean the connector 17
3
Common Operations
To Select Source by Menu 18
Reset the Unit 18
Turning the Unit On/Off 18
Volume Control 18
Setting the Sound Characteristics 18
EQ Setting 19
Turning Loudness On/Off 19
Insert a SD Card 19
Eject a Disc 19
Mute Function 19
Mode Selector 19
Infrared Sensor 19
5
4
Main Menu
Main Menu Setup 20
Video Adjust 20
Audio Adjust 20
Source Setup 21
System Adjust 21
5
5
DVD/VCD/MP4
DVD/VCD/MP4 Setup 25
DVD/VCD/MP4 Play 25
Selecting Tracks Fast 25
Number Buttons 25
Pause the Playback 25
Stop the Playback 25
Play tracks at Random 26
Repeat Playing 26
Skip backward/forward/
Playback
System Switch 26
Slow Motion Playback 26
Increase Picture Size 26
On Screen Display 26
Setting the Playback Time 27
Changing Audio Language 27
Changing the Subtitle Language 27
Changing the Viewing Angle 28
Selecting Channel 28
Program Playing 28
Playing PBC(Menu) 28
Selecting Menu 29
DVD Setup Menu 29
26
F.F/F.REW the
2
11
Additional Information
Contents
00
Common Symptoms
There is no power.
The disc cannot
be loaded.
The device does not
work correctly
(EJECT, LOAD,
PLAY)
There is no sound.
The operation keys
do not work
The sound of the
disc player skips
No radio reception.
In automatic search
mode the radio does
not stop at a transmitting station.
Cause Solution
The car ignition is
switched off
The fuse has blown.
There is another disc inside
the player
Inserted disc is upside down
The surface of disc is extremely dirty, Scrached or
damaged.
Temperature inside the car is
too high.
The volume control is set too
low.
The device has not been wired
correctly.
1. The built-in microprocessor
is not operating properly.
2. Front panel is not properly
attached into its place
The installation angle is more
than30 degrees
The surface of the road is
uneven.
The surface of disc is extremely
dirty,scrached or damaged.
The antenna cable is not
connected.
The transmission signals are
too weak.
If the power supply is properly connected to
the car accessory, switch the ignition key to
ON or ACC.
Replace with same amperatge fuse rate.
Remove the disc from the player
Insert the compact disc with the label facing
upward
Clean the disc or try another disc,if the new
disc works correctly, the first disc is damaged.
Cool off until the ambient temperature returns
to normal.
Turn up the volume properly.
Check the connections according to
the wiring diagram.
1. Switch the device off and on again or press
the RESET button.
2. Remove and reinstall the front panel.
Adjust the installation angle to less than 30
degrees
Wait until the road becomes smoother before
playing the disc.
Clean the disc or try another disc, if the new
disc works correctly, the first disc is damaged.
Insert the antenna cable firmly into the antenna
socket of the unit.
Tune in to a radio station manually.
6
CD/MP3/SD/USB
CD/MP3/SD/USB Setup
CD/MP3/SD/USB Play
Selecting Tracks Fast
Repeat Playing
Number Buttons
Selecting Track
Stop Play
37
37
37
37
Playing Tracks at Random
Pause the Playback
37
Skip backwafd/forward/F.F/F.REW
the Playback
On Screen Display
Program Playing
Exit SD Card
Exit USB
7
Tuner
37
38
38
38
38
Listening to the Radio 39
Band Selector 39
Manual/Automatic Tuning 39
DX/LOC Selector 39
Selecting The stored Station 39
MO/ST Selector 40
Scanning/Memorizing Stations
Automatically 40
On Screen Display 40
Goto FREQ 40
Number Buttons 40
RDS Setup 41
Alternative Frequencies
Traffic Alarm
Program Type
41
41
8
AUX
36
AUX Touch Screen Menu 42
36
36
9
Bluetooth Mode
Bluetooth Operational Interface 43
Using a Bluetooth Wireless connection 43
37
Pairing Your Unit and Bluetooth Phone 43
Pairing in Handsfree Mode 43
Cellphone Pairing Mode 44
Bluetooth Connection and Disconnection 44
Using the Unit as a Handsfree Device 44
Last Number Dialing 44
To Dial by Cellphone 44
To Dial by the Unit 45
Using the Unit as Bluetooth Music 45
Audio Transfer between The Unit and
Phone 45
10
IPOD
IPOD Play
Selecting Tracks Fast
46
46
Playing Track F.F/F.REW 46
Switch 46
Repeat Playing
Playing Tracks at Random
Pause the Playback
46
46
46
File Selector 47
Video or Picture Mode 47
Eject IPOD 47
41
11
Additional Information
Simple Troubleshooting Guide 48
48
3
Before You Start
IPOD
10
IMPORTANT SAFEGUARDS
Be sure to connect the color coded leads
1
according to the diagram. Incorrect con-
2
3
4
5
6
7
8
9
10
11
12
nections may cause the unit to malfunction or damage the vehicle s electrical system.
Be sure to connect the speaker (-) leads
to the speaker (-) terminal. Never connect the left and right channel speaker cables each other or to the vehicle body.
Make sure all the connections are completely correct before turning on your unit.
When replacing the fuse(s), the replacement must be of the same amperage as
shown on the fuse holder.
Do not block vents or radiator panels. Blocking them will cause heat to build up
inside and may result in fire.
To
lest the driver distrack his attention
from, please i
ace.
Using the unit after starting the engine,
otherwise
cause
used up.
The unit must be screened from direct
sunlight, or the
will be wasting for the high temperature.
Do not use the unit in extreme high temperature or such low temperature conditions, and also avoid humidity and direct
sunlight.
Take care of the magnetism of the unit.
Do no put the credit card, cassette or watch around the unit, or they would be
broken or some information in them lose.
To lest disturb the video frequency, keep
far away from the unit when using your
phone.
Do not put the remote under high
temperature or where the sun strikes it,
or else the control remote can not work
normally.
nstall the unit in an apt pl-
the unit can not be started, be-
the electric energy of battery was
electric energy of battery
,
control
About this manual
This unit features a number of sophisticated functions ensuring superior
operation. All the functions have been
designed for the easiest possible use,
but many are not self-explanatory. This
manual will help you understand the
functions and operations of the unit.
This manual main explains remote
control operation. However, in
addition to those functions related with
DVD/VCD/CD/MP3/MP4 operation
that can only be operated by the remote
control, there are also functions can be
operated by the buttons provided for
the main unit.
File Selector
During IPOD mode, press ROOT on the
remote control to go back to the previous
catalog.
Press to select the previous 5 tracks,
21
press to select the next 5 tracks (show
as in the right of the picture).
BT
VIDEO SRC
Note:
* Pressing in the monitor or / also
perform the same function.
MENU
31
PlaylistPlaylist
ArtistArtist
AlbumAlbum
GenreGenre
TrackTrack
Video or Picture Mode
During IPOD mode, press VIDEO to
select video or audio. Video and picture
can be played at this time.
The unit and the remote control can not be
operated in this mode, you can just operate
IPOD to select video and picture.
Note:
* Pressing in the monitor also perform the
same function.
* The IPOD TV should be set ON in this
function.
* Video playback requires Gen 5.5 or earlier
Photo or Video iPod. iPod Touch, iPod Cl-
assic, and iPod Nano with video will only
play music files.
VIDEO
29
Eject IPOD
During IPOD mode, to take IPOD out, the
main unit will switch to radio mode.
During other mode, to take IPOD out, the
main unit will keep the original mode.
47
10
IPOD
Before You Start
01
IPOD play
During IPOD playback, connect the IPOD
wire (5V) to the one in backside of main
unit. The unit will play track in IPOD.
If a IPOD is loaded, you can back to the
source status, press IPOD to enter into
IPOD setup:
8/97
disco-yeye
00:02:47
VIDEO SRC
BT
MENU
Back to the previous menu
Briefly press to play previous track,
press and hold to fast forward.
Briefly press to play next track,
press and hold to fast reward.
Play/ pause
VIDEO
Mode switch between IPOD and
main unit
BT
Bluetooth setup
SRC
Mode switch
Selecting Tracks Fast
During IPOD playback, press to play
previous track ,press to play next track .
Note:
* Pressing / in the monitor to perform
the same function
21
21
Playing Track F.F/F.REW
Press or to play the track fast for-
20
ward or fast rewind . Press it again or press
ENTER to resume to play normally.
Note:
* Pressing and holding / in the monitor
to perform the same function
Switch
During playback, press to turn to IPOD,
the screen shows: Play video on your iPod.
Then touch screen to return. Then you can
operate your iPod. Press again to
return to main unit operation.
Note:
* It is only valid on the screen.
VIDEO
VIDEO
Repeat Playing
During playback, press
repeat, disc repeat, off.
cancel this function.
Note:
* This function is operated by using the remote
control only.
15
RPT to track
Press it again to
Playing Tracks at Random
During IPOD playback, when
RDM button, Shuffle off,
pressing
Shuffle Track,
Shuffle Album will be activated.
Note:
* This function is operated by using the remote
control only.
16
Pause the Playback
27
During IPOD mode, press
pause the playback, press it again to return
to normal playback.
Note:
Pressing in the monitor also performs
*
the same function.
button to
PRECAUTIONS
This unit can play the following discs only:
Type of disc
DVD
VCD
CD
MP3
MPEG-4
NOTE: The unit is compatible with VCD1.0/1.1/2.0/3.0 version and DVCD disc.
Do not attempt to modify the unit,
modifying the unit may cause an
accident.
Stop the vehicle before carrying
out any operation that could
interfere with your driving.
Do not work in extremely high or
low temperature. Be sure the
temperature inside the vehicle
is between +60 C and -10 C
before turning on your unit .
To enjoy optimum sound and
images while playing, handle the
discs as follows:
Handle the disc by its edge to keep
the disc clean, and do not touch the surface.
Recorded material
Sound and moving
pictures
Sound and moving
pictures
Sound only
Sound only
Sound and moving
pictures
Do not use your CDs with paste residue
or ink attached.
Do not use CDs with labels or stickers
attached, which may leave a sticky residue
while beginning to peel off.
(Shown as the picture)
Clean the discs with an optional cleaning cloth. Wipe each disc from the center out.
(Shown as the picture)
Size of disc
46
5
01
Before You Start
Bluetooth
09
Maintenance
Replacing the Fuse
Make sure the amperage matches the
specified value when replacing the fuses. If the fuse is blown, check the power connection and replace with a new one. If the same problem occurs,
it would be subjected to the malfunction. In such cases, please consult
to the nearest service dealer.
!
Warning
Never use the fuse with the rated
amperage more than that supplied to
your unit, otherwise it will damage the
unit.
Replacing the Battery
When the range of the operation of the card remote control becomes short
or no functions while operating. Replace the lithium battery with a new button cell (CR2025). Make sure the battery polarity before replace.
Gently pull out the Battery Holder while
pressing the Stopper.
Insert the Battery Holder into the Remote
Control.
Precautions on Using Lithium
Battery
Always keep the lithium battery beyond
children s reach. In case
swallowed, see a doctor immediately.
Cleaning the battery with a dry cloth,
to ensure its perfect connected.
Make sure the proper polarity when
loading with the battery.
To prevent short circuit, do not use
metal tweezer to clip the battery.
!
Warning!
Improper handle with the battery may
lead to explosion.
It cannot be charged , disassembled or
thrown into a fire.
To Dial by the Unit
when cellphone is connected, press to
input the call number, then press
to dial, DIAL OK appears, when the call is
pick up, and it appears PICK UP.
Note:
* Press CLEAR on the remote control or
22
8
in the monitor to delete wrong inputs.
* Press on the unit or perform the
same function.
23
30
Using the Unit as Bluetooth
Music
During bluetooth mode, the musics on the
cellphone switch to the unit for play.
To select music fast: press to play
the previous track, press to play the next
one.
Pause play: press to pause play.
Stop play: press to stop play, and
press the PLAY to play the current track
again.
Note:
* This function is only valid on remote control .
17
18
21
Audio Transfer between the Unit
and Phone
6
Press to change the conversation from
the unit to the cellphone.
Note:
* The function will be cause to be disconnected
bluetooth link for Nokia phones, but you do
not worry just press button while private
conversation with Nokia phones,then switch
back to the unit automatically.
6
Put the button-type battery with mark(+)
upward into the Battery Holder.
6
45
09
Bluetooth
Before You Start
01
Cellphone Pairing Mode
1. Browse your cellphone menu and find
the connectivity or Bluetooth connection
section.
2. Select search for a new handsfree device
function and allow the phone to find the
mobile.
(Different cellphone has different blue tooth menu, please refer to your phone
manul.)
3. When CAR A/V DEVICE appear, select
this item.
( if it can not be connected, please refer
to mobile manual, and connect it again.)
4. To input the password, the password is:
1234.
5. Press the connect with the Handsfree
option on your cellphone, and CON-
NECTED appears.
Bluetooth Connection and
Disconnection
When established bluetooth connection
between this unit and the cellphone, bluetooth
icon on the display appears in red.
29
Press PAIR to turn off bluetooth connection, and appears in blue.
29
Press , PAIRING SUCCESS appear on
the display, then display shows CONNECTED
when bluetooth connected; display shows
PAIR TIME OUT, when bluetooth
disconnected.
Note:
* Please keep the phone battery is full of power,
or else the bluetooth connection will be disturbed.
* To ensure connection succeed
----Please delete menu of cellphone with bluetooth.
----Please reset the unit and cellphone.
----Please reset every step of pairing.
* Disconnect after paring
----Please pair the phone in manual.
For example: pairing fixture cellphone connect.
* Pressing on the head unit or in the
PAIR
5
monitor also performs the same function.
* Pressing in the monitor to turn off the
7
bluetooth function.
Using the Unit as a Handsfree
Device
When the unit is ringing, then it appears
call from and the phone number ID******
*****on the dialing,
To accept call: Press to answer a call,
30
it appears PICK UP on the display.
To reject call: Press to reject a call,
31
it appears REJECT on the display.
To end call: Press to end call, and
HANG UP appears on the display.
Note:
* Some of cellphones do not support reject
call during bluetooth mode.
* Press and on the unit or and
performs the same function.
Last Number Dialing
30
Press button, it appears last call
number on , press again, and then
4
PICK UP appears on the display during
conversation.
Note:
* Press on the unit or perform the
same function.
* To dail the number of the unit in the car
only.
To Dial by Cellphone
1. The unit activated automatically when you
make a call by cellphone, and DIAL OK
appears.
2. When you receive a call, PICK UP appears
on the display.
Location of the Controls
The Expanding
ANGLE ANGLE
OPEN
The Whole
18
13
14
SEL
MODE
BAND
PWR
ANGLE ANGLE
OPEN
SEL
4
MODE
BAND
PWR
EQ/AF
MUTE
LOU/TA
MIC
EQ/AF
MUTE
LOU/TA
MIC
17 3
REL
RPT RDM
5
3
21
4
A/V IN
6
12
11
REL
RPT RDM
5
3
21
4
5 67 89
A/V IN
6
12
10
44
7
01
Before You Start
Bluetooth
09
The Base
A/V IN
SEL/VOL (Power/Volume adjust/Setting of
the sound characteristics ) Button
During the waiting mode, briefly press it to
turn on the unit, press and hold it to turn off
it. Rotate the button clockwise to increase
the volume and anti-clockwise to decrease
it.
Briefly press it to set the sound characteristics
and rotate it to set the terms.
MIC(for bluetooth)
MODE/ (Mode switch/hang up or refuse
the call) Button
Press it to switch the mode.
During blutooth mode, press it to hang up or
refuse the call.
NUMBER Button/Pause/Stop/Repeat/RDM
During radio mode, press it to select preset
station.
During playback, the functions of
RPT RDM can be opened.
REMOTE Infrared Sensor
/ [Previous Track/Adjust frequency
forward/ Next Track/Adjust frequency backward] Button
Bluetooth Operational Interface
28
Press BT on the remote control or BT in
the monitor to open the bluetooth operational
interface:
BLUETOOTH
1
2 3 PAIR
4 5 6
0 #
1615
USB Socket
MUTE
REL (release the front panel) Button
Number Buttons
To input the phone number.
Dail, last phone, answer a phone.
*
ACH
987
POWER
C
BACK
Using a Bluetooth Wireless
Connection
The device can be dialed wirelessly in bluetooth status. Before using the bluetooth function,
please turn on your cellphone bluetooth function.
Note:
* To provide the best sound without or little
distorted sound(the cellphone or network
brings).
* Full duplex conversation.
* Bluetooth ver2.0 compliant.
* Please dial-up the device before connecting
bluetooth.
Pairing Your Unit and Bluetooth
Phone
The device supports handsfree profile,head-
Eject Button
Press it to insert or eject a disc.
Disc Loading Slot
OPEN Button
BAND/ (band selector/the last call or
answer the call) Button
RESET Button
SD Card Slot
LOUD/TA(loudness/traffic alarm) Button
EQ/AF(equalizer/alternative frequency)
Hang up, refuse a phone.
Number Show
PAIR
ACH (audio change)
POWER
Press it to turn on or turn off the bluetooth function.
8
C (clear)
9
BACK
set profile, A2DP( Audio Advanced Distribution profile)and AVRCP(Audio Video
Remote Control profile). Follow the pairing
instruction for the first time use, after that
the unit will connect automatically.
Pairing in Handsfree Mode
1. Press PAIR, and PAIRING shows on
the screen.
2. To get into CELLPHONE CONNECTION
to search fixtures;
3. If the cellphone has connected, PAIRING
29
SUCCESS appear and then CONNECTED
in order, will from blue to red.
Note:
* Pressing on the head unit or in the
monitor also performs the same function.
PAIR
5
8
43
Loading...