Planet Audio PA100B User Manual

PA100B

WIRELESS

USER MANUAL

BLUETOOTH

®

SPEAKER

Parameter

( THD=10% ) 1 2W

20Hz~20KHz

33W

3 7V 400mAh Li-polymer battery
DC 5V 400mA

OD 26” X H 27 5” (OD 66mm X H 70mm)

Package Contents

PA100B

3.5 mm Aux-In Cable

Warranty card

Function Indication Drawing

Short press:

press:

press:
press:

Operation Specification

Operation the PA100B

-

Slide the On/Oī switch to the "On" posŝƟon, the Blue LED wilůŇash. When the
Green LED is on, the unit is in Bluetooth Pairing Mode.

-Slide the On/Oī switch to the "Oī"posiƟ on, all the LED status lights will shut oī.

Bluetooth Mode

-The unit will automaƟcally go into “Pairing Mode” when it is turned on.

Aux-In Mode

Plug in the supplied 3.5 mm cable into the PA100B. The other end is connected
to the device.
*Please note that only “Volume +/-” will funĐƟon on
not funĐƟon when in Aux-In mode.

Charging

-Ʃach the USB cable to the PA100B, and plug in to any USB charger. If the unit
is completely discharged, it take approximately 2.5 hours to fully charge the unit.

LED Status

Red LED: On- Charging/ Oī– Charging complete
Green LED: On-BT Mode
Blue LED: Flashing-Pairing Mode/ Slow Flash-Connected

Powering On

Powering Off

Pairing

- Go into your devices seƫngs menu and look for “Planet Audio ”

-If prompted for a password enter: 0000

-AŌer the unit has paired,

when PA100B is turned on and the device is in range.

-If no device is found aŌer 25 sec. the PA100B will automaƟcally enter
pairing mode.

Streaming Music

- Press “ ” to start playing music

- Press “+” to play the next track

- Press “ -” to play previous track

- Press and Hold either “+/-” for volume

and connected it will connect automaƟcally

the unit. Track control does

planetaudiousa.com

TELEPHONE

888.990.1236

805.988.0215

FAX

805.988.0275

TECHNICAL SUPPORT

planetaudiousa.com/support

PA100B 0313

"MMTQFDJÎDBUJPOTTVCKFDUUPDIBOHFXJUIPVUOPUJDF

2013 Planet Audio