Before oper ating the unit, read thi s manual thoroughly and keep it handy
for future re ference .
To avoid injur y or accident , read the following precautions before
installin g and operating the unit .
ON INSTALLATION
DO NOT install any receiver in loca tions where;
- it may obstru ct the steering wheel and gearshift lever operations, as th is
may result in a t raffic accident.
- it may obstru ct the operation of safe ty devices such as air bags, as this
may result in a f atal accident.
- it may obstru ct visibility.
DO NOT operate any receiver while m anipulating the steering wheel, a s
this may resu lt in a traffic accide nt.
The driver mu st not watch the monitor while driving.
IF THE DRIVER watches the monitor w hile driving, it may lead to
carelessn ess and cause an accident.
IF YOU NEED to operate the receive wh ile driving, be sure to look ahead
carefully o r you may be involved in a traffic accident.
IF THE PARKING BRAKE is not engaged.“ ParkingBrake” fl ashes on the
monitor, and n o playback picture will be shown.
- This warn ing appears only when th e parking brake wire is connected to
the parking b rake system built in the car ( refer to the electric connection )
A PLANET AUDIO MULTIMEDIA
ABOUT THE LIQ UID CRYSTAL DISPLAY (LCD) PANEL
Do not press on t he LCD panel on the unit as doing so can distort the
picture or ca use a malfunction . Th e picture may become unc lear , or the
LCD panel may b e damaged .
NOTES ON CLEA NING
-Clean the LC D panel with a slightly damp soft cloth.
-Do not use sol vents such as benzine, thinner, commercially available
cleaners or a ntistatic spray .
- Do not use alcohol to clean the screen .
If your car was p arked in a cold or hot place , the picture may not be clear .
The monitor is not damaged . The picture will become clea r the temper ature in your c ar becomes normal .
-2-
Safety Information
CAUTION:
THIS DI GITAL VIDEO PLAYER IS A CLASS I LASER PRODUCT. HOWEVER
THIS DIGITAL VIDEO PLAYER USES A VISIBLE/ INVIS IBLE LA SER BEAM WHICH COULD CAUSE .
HAZARDOUS RADIATION EXPOSURE IF DIREC TED. BE S URE TO OPERATE
THE DIG ITAL VIDEO PLAYE R CORRECTLY AS INSTR UCTED .
USE OF CONTROLS OR ADJUS TMENT S OR PERF ORMANCE OF
PROCEDURES OTHER THAN TH OSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND D O NOT
REPAIR YOUR SELF. REF ER SERVICI NG TO QUALIFIED PERSONNEL.
WARNING:
TO RE DUCE THE RISK OF FIRE O R ELECT RIC SHO CK, DO NOT EXP OSE THI S
EQUIPMENT TO RAIN OR MOI STURE .
TO RE DUCE THE RISK OF FIRE O R ELECT RIC SHO CK, AND ANNOYING
INTERFERENCE, USE O NLY THE REC OMMEN DED ACCESSORIES.
THIS DE VICE IS INTENDED FOR CONTINUOUS O PERATION.
This pr oduct incorporates copyright prote ction t echno logy that is protected
by method claims of cer tain U. S. Pate nts and o ther intellectual property ri ghts
owned by Macrovision Corpo ratio n and oth er rights owners.Use of this
copyright protect ion tec hnolo gy must b e authorized by Macro vision Corporati on,
and is intended for home and oth er limi ted vie wing uses only unless
otherwise authori zed by Ma crovi sion Co rporation. Reverse engineering or
disassembly is prohibite d.
REGION MANA GEMENT INFORMATIO N:
This Di gital Vide o Playe r is designed and manufactured to respon d to the Re gion
Management Inform ation t hat is re corde d on a Digital Video di sc. If the Region
number described on the Digi tal Video disc does n ot corr espon d to the Region number of this Digita l Video Player, this Digita l Video Player cann ot play t his dis c.
-3-
Disc Note
Disc format s supported by this
player
CD
Audio and Video
Disc size 12 cm
Audio and Video
Disc size 12 cm
Audio
Disc size 12 cm
Audio
Disc size 12 cm
Digit al
Video
VCD
CD
MP3
Dig ital
Video
VCD
MP3
Discs which c annot be played
with this pla yer
Digital Video-RAM
CDV
CDG
Handling an d Cleaning
Dirt, dust, scratch es and wa rping d isc
will cause misoperation.
Do not place stickers o r make
scratches on discs.
Do not warp discs.
A disc should always be kept i n its
case when not in use to pre vent fr om
damaging.
Do not place discs in the f ollow ing
places:
1.Direct sunlight
2.Dirty, dusty and damp areas
3.Near car heaters
4.On the seats or dashbo ard
Disc Cleani ng
Use a dry soft cloth to wip e the sur face.
If the disc is quite dirt y, use a soft cloth
slightly moistured with is oprop yl (rub bing)
alcohol. Never use solvent s such as
benzine, thinner or conven tiona l recor d
cleaners as they may mar the sur face of
the disc.
Note:
A disc may become somewhat scra tched
(although not enough to make i t
-4-
unusable) depending on you r handl e it
and conditions in the usage en viron ment.
Note these scratche s are not a n
indication of any problem wi th the pl ayer.
Lab el si de
up
Do no t tou ch
the
und ers ide
of th e dis c
Do no t
ben d
Wip e the disc fr om
center
tow ard t he out side
edg e
Preparing N ew Discs with Rough
Spots
A new disc ma y h av e r oug h e dg es on
its in side and ou ts ide ed ge s. If a d isc
with rou gh edges is us ed , t he prope r
setting w ill not be per fo rme d and th e
player will not p lay th e disc. Therefore,
remove the ro u gh edg e s i n ad v anc e
by using a ball point pen or penci l as
shown on the right. To rem o ve t he
rough edges, press the sid e o f th e pen
or pencil against the inside a nd outs ide
edges of the disc.
Rou gh spot s
on
out side ed ge
Bal l point p en
or pe ncil
Rou gh spot s
on in side
edg e
Installation
NOTES:
1. Choose the mounting locat ion whe re the un it will not interfere with the normal
driving function of the driv er.
2. Before finally installi ng the un it, con nect the wiring temporarily and make sur e
it is all connected up properl y and the u nit and t he system work properly.
3. Use only the parts included w ith the u nit to en sure proper installation. The use
of unauthorized parts can ca use mal funct ions.
4. Consult with your nearest d ealer i f insta llation requires the drilling of holes o r
other modifications of the v ehicl e.
5. Install the unit whe re it doe s not get i n the dri ver s way and cannot injure the
passenger if there is a sudden s top, li ke an eme rgency stop.
6
. Avoid in stalling the unit where it would be subjec t to high t emper ature , such
as from direct sunlight, or fr om hot ai r, from th e heater, or where it would be
subject to dust, dirt o r exces sive vi brati on.
7. If installation angle exc eeds 30 f rom hor izontal, the unit might not give its
optimum performance.
DIN FRONT/R EAR-MOUNT
This unit can be properly inst alled e ither f rom "Front"(conventional DIN
Front-mount) or "Re ar"(D IN Rear -moun t installation, utilizing threaded
screw holes at the sides of the un it chas sis). F or details, refer to the followin g
illustrated installati on meth ods.
'
30
Removing the unit
1. Press the REL butt on to rel ease th e front panel .
2. Remove the control panel .
-5-
Installation
Installation the unit
3. Remove the PLASTIC COVER of the both sides away
PLASTIC COVER
4. Insert the two KEY PLAT into the grooves at both sides
of the unit as shown in figure until they click .
KEY PLATE
5. Pulling the levers makes it possible to remove
the unit from the dashboard .
SPRIN G WASH ER
PLAIN WA SHE R
TAPPING SCREW
DASH BO ARD
HEX NUT
METAL MOU NTING
STRAP
CONSO LE
SLIDE B RAC KET
HOUSI NG
HEX BOLT
-6-
Installation
How To Remove And Install The Front Panel
When detaching or attachin g the con trol pa nel, be careful not to damage the
connectors on the back of the co ntrol p anel an d on the panel holder.
Detaching C ontrol Panel
Before deta ching the control panel, be sure to turn off the power.
1). Press the “REL” release button and the left han d side of f ront pa nel will release.
RELEA SE BU TTON
2). Pull-off the front panel and keep the front pan el into t he case .
PROTE CTI VE CA SE
AttachingC ontrol Panel
1). First insert the ri ght han d side of t he fron t panel into the hollow of the unit .
(NOTE : the “bulge” poi nt on the p anel mu st be att ached into the hollow of the unit .)
2). Gently push the lef t hand si de of the f ront pa nel until you feel a “ Click” .
Hollow
Bulge
-7-
Installation
CHANGING THE CONTROL PANEL ANGLE
When you want t o change the viewing angle of the operating unit to play,
you can touch t he section on touch scre en (or press the button
on the front pa nel) repeatedly to select the desired angle as follows:
ANGLE 1 - ANGLE 2 - ANGL E 3 - ANG LE 4 - AN GLE 1 .
ANGLE 1ANGLE 2
ANGLE 3ANGLE 4
Caution:
Do not insert y our finger behind the control panel.
-8-
Electric Connection
WI RING CONNECTION
RCH IN RED
VIDEO OUT(2 ) YELLOW
AUX 2 VIDEO IN YE LLOW
LCH IN WHITE
RCH RED
LCH WHITE
RADIO ANTENN A JA CK
IGNITION SW ITC H(B+)
MEMORY BACK-UP( B+)
GROUND(B- )
AUTO AN TEN NA
FRONT
LCH SPK.
AUX2
REA R OUTPU T CAB LE
FUSE
RED
YEL LOW
BLA CK
BLU E
WHI TE
WHI TE/BL ACK
FRO NT RCA OUT PUT
CAB LE
FUSE
VIO LET/W HITE
LIG HT GREE N
GRE Y
GRE Y/BLA CK
SUBWOOFER G REY
REAR CAMERA IN PUT Y ELLOW
FRONT RC A RED R
VIDEO OUT YEL LOW
FRONT RC A WHITE L
KEY GROU ND( BLACK)
KEY 1(BR OWN )
KEY 2(WH ITE )
(B+)12 V
REAR CAMERA SW ITC H
(B-)PAR KIN G BRAKE
FRONT
RCH SPK.
REAR
LCH SPK.
GRE EN
GRE EN/BL ACK
VIO LET
VIO LET/B LACK
REAR
RCH SPK.
Note:
the ground connection cabl e (park ing bra ke B-) must be connected in order for
pictures to be played back to th e monit or. If the c able has not been correctly
connected, the message “PARKING BRAKE ” appea rs on the m onito r.
-9-
Loading...
+ 23 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.