Keep the volume level Iow enough to aware of
the road and traffic conditions.
CAUTION
In some countries, it's unlawful to operate a
vehicle while video is displayed in the
driver's viewing area. Please always switch
the unit's display to "Font Type Display"
mode by pressing the DISP button while
driving.
For safety reason, the driver should only
enjoy / watch the video while the car is in
parking mode.
When Car Washing
Do not expose the product to water or
excessive moisture. This could cause electrical
shorts, fire or other damage.
CAUTION
In order to avoid any accident, the driver
must not watch video while driving. This unit
is designed to not allow watching moving
video while driving. Park your car in a safe
place and engage the ‘PARKING BRAKE
WIRE' before watching moving video.
When Parked
Parking in direct sunlight can produce very
high temperatures inside your vehicle. Give the
interior a chance to cool down before starting
playback.
Use the Proper Power Supply
This product is designed to operate with a 12
volt DC, negative ground battery system (the
regular system in a North American car).
Protect the Disc Mechanism
Avoid inserting any foreign objects into the slot
of this player. Failure to follow this may cause
malfunction or permanent damage due to the
precise mechanism of this unit.
CAUTION
THIS MOBILE MULTIMEDIA PLAYER IS A
CLASS I LASER PRODUCT. THIS UNIT USES
A VISIBLE/INVISIBLE LASER BEAM WHICH
COULD CAUSE HAZARDOUS RADIATION IF
EXPOSED DIRECTLY. BE SURE TO
OPERATE THE MOBILE MULTIMEDIA
PLAYER CORRECTLY AS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OR PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
DO NOT OPEN COVERS AND DO NOT
REPAIR BY YOURSELF PLEASE REFER
SERVICING TO A QUALIFIED
TECHNICIAN.
NOTE:
1. TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
2. TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES.
3. THIS DEVICE IS INTENDED FOR
CONTINUOUS OPERATION.
E - 1
Page 4
DISC AND FORMAT SUPPORTS
This unit can play various video/audio format
which stored into Disc/USB or SD card on
Media Player.
The following chart helps you to check if a
disc is supported by this unit, as well as what
functions are available for a given disc type.
Before playing, wipe the disc using a clean
cloth, working from the centerhole towards the
outside edge.
Never use benzene, thinners, cleaning fluids or
anti-static liquids orany other solvent.
NOTE
A disc may become somewhat scratched
(although not enough to make it unusable)
depending on you handle it and conditions
in the usage environment. Note these
scratches are not an indication of any
problem with the player.
Label side
Up
Do not bend
Never touch
the under side
of a disc
Wipe the disc surface
from the
center to the edge.
E - 2
Page 5
INSTALLATION
The following illustration shows a typical installation. If you have any questions or require
information regarding installation kits, consult your customer car audio dealer or a company
suppling kits.
If you are not sure how to install this unit correctly, have it installed by a qualified technician.
1
Trim Plate
Disassembly
2
tool
When you stand the unit, be careful
not to damage the fuse on the rear.
Sleeve
To attach the front panel back to the unit
chassis, firstly join the right guide block
hole to the right cylinder (Step ), then
join the left guide block hole and the left
cylinder (Step ).
Step 2
4
Control
Panel
Removing the unit
Before removing the unit, release the rear section.
1
Step
2
Step
To remove the front panel:
1. Press the Panel Release Button.
2. After flipping down the front panel, push rightwards
Step
( ), thendraw the left of the panel ( ).
1
.
1
When using the optional stay
Washer
Dashboard
Sleeve
Release
Step
Stay(option)
Screw(4x12mm)
Screw
2
Nut
2
Trim Plate
When installing the unit without
using the sleeve
Screw
3
1
2
Step 1
182m
m
5
3
1
2
3
Tri m
Plate
m
m
Screw
Dashboard
Sleeve
Bend the appropriate tabs
to hold the sleeve firmly
in place.
3
Disassembly
tools
Insert the two disassembly tools, then pull
them as illuatrated so that the unit can be
removed.
30°
Install the unit at an angle
of less than 30°.
Bracket
Installation using the screw holes on the sides of the unit.
Fastening the unit to the factory radio mounting bracket.
E - 3
Screw
Page 6
CONNECTING THE SYSTEM
About Parking Wire
CAUTION
In order to avoid any accident, the driver must
not watch video while driving. This unit is
designed to not allow watching moving video
while driving. Park your car in a safe place and
engage the parking brake before watching
moving video.
NOTE
The Video Blocking system under Parking
Brake NOT ENGAGED only control this
unit's display, This system will not affect the
Video Output thru the rear RCA Video
Output.
TIPS
Be sure to connect Parking Brake connection
lead. ( please see more details on “ Wiring
Diagram.”)
NOTE
If watch moving video from Disc or AV In
source but Parking Brake is NOT PROPERLY CONNECTED, the video signal
will be blocked by the system and the below
display will be show on TFT:
About The Reverse Wire For
Back Up Camera System
If user connected a back up camera system
to this unit, when the vehicle is in reverse
Gear (Back Up mode), the front in-dash TFT
display will automatically switch to Back Up
Camera Video signal regardless whatever
mode is currently displayed on the front indash TFT.
Tips
Be sure to connect Reverse wire properly.
(please see more details on “ Wiring
Diagram.”)
E - 4
Page 7
CONNECTING THE SYSTEM
Wiring Diagram
L
R
REAR
ISO CONNECTO
SOCKET
(See Figure 1)
ANTENNA
JACK
(NOT INCLUDED)
REAR LINE OUT
RCA TO RCA CABLE
SUBWOOFER
FRONT LINE OUT
BLACK
VIDEO IN
VIDEO IN
AUDIO IN (RIGHT)
AUDIO IN R
AUDIO IN (LEFT)
AUDIO IN L
BLUE
WHITE
RED
YELLOW
RED
WHITE
L-CH
R-CH
ISO MALE CONNECTOR
CONNECTOR B
1234567
B
A
CONNECTOR A
Figure 1
ISO CONNECTOR 4PIN+8PIN
FEMALE WITH MALE TERMINAL
8
57
4
8
ISO CONNECTOR WIRING CHART
WIRE COLOR
PIN
YELLOW
A4
BLUE/WHITE
A5
RED
A7
BLACK
A8
VIOLET
B1
VIOLET/BLACK
B2
GREY
B3
GREY/BLACK
B4
WHITE
B5
WHITE/BLACK
B6
GREEN
B7
GREEN/BLACK
B8
RED
FUNCTION/LABEL
CONSTANT POWER(+)
REMOTE AMP WIRE(+)
ACCESSORY POWER(+)
GROUND(-)
RIGHT REAR SPEAKER (+)
RIGHT REAR SPEAKER (-)
RIGHT FRONT SPEAKER (+)
RIGHT FRONT SPEAKER (-)
LEFT FRONT SPEAKER (+)
LEFT FRONT SPEAKER (-)
LEFT REAR SPEAKER (+)
LEFT REAR SPEAKER (-)
WHITE
LIGHT GREEN
PARKING
BRAKE ( )
Connect to Parking Brake.
2.5m extension wire
VIOLET/WHITE
REVERSE(+)
OVERRIDE
WIRE
VIDEO OUT
VIDEO OUT
YELLOW
Brake
Switch
Ground
E - 5
Page 8
THE FUNCTIONS OF MAIN UNIT
1
10
SRC
6
ESC
DIM
9 11
LIST
8
4
3
BAND
EQ
SUB-W
INFO
MENU
2
5
/
FUNC
XBS
MUTE
AUX
IN
17
7
13
1415
P9689
16
12
No.
1
2
3
4
5
Item
(RELEASE)
MENU
INFO
ENCODER
VOLUME
BAND
/
SUB-W
FUNC
(FUNCTION)
XBS
Decriptions
Press this button to open the control panel.
Press this button to access into the SystemMenu mode.
Under DVD playback mode, press repeatedly to view play
information: Title--->Chapter--->Play time
Rotate the Encoder Volume Knob to increase and decrease the
volume. ( The Maximum volume level is “46”.)
Under Tuner mode, short press this button to change between
BAND FM1, FM2, FM3, AM1(MW1) (or AM2 (MM2) if available).
Under Media playback mode, short press this button to Pause/
Resume Play the music.
Press and hold this button to turn On/Off the subwoofer function.
Press this button to enter into the Function mode.
Hold & press this button to turn On/Off the Bass booster function.
E - 6
Page 9
THE FUNCTIONS OF MAIN UNIT
6
CLOCK
MUTE
7
POWER
LIST
8
EQ
TUNE UP/DOWN
FILE UP/DOWN
9
FAST BACKWARD
/ FORWARD
SOURCE
10
ESC
11
DIM
12
EJECT
Press this button to view the Clock, press this button again
to return to previous mode.
Short press this button to turn Mute or restore volume.
Press this button or any other button on the front panel
(except Release button) to turn the unit on. Hold & press this
button again to turn the unit off.
Under tuner mode,press this button to stored
station.
Under the Media playback mode, press this button to list the
searching of Tracks or Files on the Media playback mode.
Under the DVD/MP4 mode, press this button to list the
searching of DVD Root Menu or Files on the playback mode.
Under the VCD mode, press this button to turn On/Off the
PCB function.
Hold & press this button to select the Preset Equalizer setting.
Under tuner mode, press and hold this button momentarily to
enter into the Auto Seek/ Manual Seek mode.
Under media playback mode, press these buttons to skip a
chapter / track / scene / file.
Under media playback mode, press and hold momentarily to
fast forward / backward the Disc.
Press this button to select different source playback mode:
TUNER / DISC / USB / SD CARD / BT AUDIO / AUX-IN
Press this button to quick return previous menu or mode.
Hold & press this button to adjust the TFT dimmer High or Low.
Press this button to eject the Disc.
Show The List of
13
14
15
16
17
DISC SLOT
RESET
SD CARD
SLOT
USB SLOT
AUX-IN JACK
Insert the disc into CD slot.The CD will begin to play.
User can reset the unit to its default setting. Press this button
by using a ball-point .pen or sharp object
This unit can support playback MP3/WMA/JPEG/MPEG4/
DIVX format which are stored on the SD Card.
This unit can support playback MP3/WMA/JPEG/MPEG4/
DIVX format which are stored on the USB memory stick.
This unit is allowed to connect with external Audio system
such like MP3 Player or hand phone. User can connect the
external Audio system thru the Aux-In jack on front panel.
E - 7
Page 10
THE FUNCTIONS OF REMOTE CONTROL
No. Button Item
1
2
POWER ON
OFF
MUTE
2
21
13
10
4
9
8
12
16
17
11
1
DIMMER
LIST
FUNCTION
FUNC
VOLUME
20
5
6
14
BAND
DVD
AUDIO
OK
DVD
MENU
XBS
DVD
TITLE
SETTING
EQ
SUB
TITLE
3
7
15
18
19
Decriptions
Press this button to turn On / Off the unit.
Press this button to turn the Mute On / Off.
Press this button enter into the Setting mode.
Press this button to enter into the HOME menu.
Press this button to increase the volume.
Press this button to decrease the volume.
Press this button to enter into the preset Equalizer setting
mode.
Under the tuner mode, press this button to access the
Manual Seek mode.
Under the media playback mode, press this button to
skip to previous / chapter. Press and hold these buttons
to play fast forward.
Under the tuner mode, press this button to access the
Manual Seek mode.
Under the media playback mode, press this button to
skip to next track / chapter. Press and hold these button
to play fast backward.
E - 8
EQ
SETTING
HOME
VOLUME +
VOLUME -
EQ
3
4
5
6
7
8
9
Page 11
THE FUNCTIONS OF REMOTE CONTROL
10
11
12
13
14
15
16
17
18
19
20
OK
BAND
LIST
L
XBS
DVD
AUDIO
DVD
MENU
SUB
TITLE
TITLE
FUNCTION
FUNC
UP/DOWN
OK
BAND
LIST
RETURN
XBAS
DVD AUDIO
DVD MENU
SUBTITLE
TITLE
FUNCTION
Use these buttons to move cursor up/down.
Use this button to confirm the selection.
Under the tuner mode, press this button to change the radio
Band.
Press this button to Pause / Resume Play the music under
media playback mode.
Under tuner mode,press this button to Show The List of
stored station.
Under the Media playback mode, press this button to list the
searching of Tracks or Files on the Media playback mode.
Under the DVD/MP4 mode, press this button to list the
searching of DVD Root Menu or Files on the playback mode.
Under the VCD mode, press this button to turn On/Off thePCB
function.
Press this button to quick return previous menu or mode.
Press this button to turn On/Off the iX-BASS booster function.
Under DVD mode, press this button during playback to
change the audio language, if available on the disc.
Under DVD mode, press this button access into the DVD
main menu.
Under DVD mode, press this button during playback to turn
on/off subtitles and change the subtitles.
Under DVD mode, press this button to bring up the Title Menu.
Press this button enter into the function mode.
21
DIMMER
DIMMER
Access into dimmer settings.
E - 9
Page 12
ADJUST SETTINGS
Press the MENU/INFO button access into the
System Menu. User can rotate the Encoder
Volume Knob to select the below options,
then press Power/Mute to confirm.
Adjust Audio Setting
User can rotate the Encoder Volume Knob to
select the below Audio Settings, then press
Power/Mute to confirm.
Bass
User can use the Encoder Volume knob to adjust
the desired Bass level range from -6 to +6.
Treble
User can use the Encoder Volume knob to adjust
the desired Treble level range from -6 to +6.
Fader
User can use the Encoder Volume knob to
adjust the Fader between the front and rear
speakers from 12R (full rear) to 12F (full front).
Balance
User can use the Encoder Volume knob to adjust
the Balance between the right and left speakers
from 12R (full right) to 12L (full left).
Tuner Setting
User can rotate the Encoder Volume Knob to
adjust the Tuner Settings, then press
Power/Mute to confirm.
Tuner Area
This option allows the selection of the
frequency spacing appropriate for your area.
Rotate the Encoder Volume Konb to select the
Tuner Area: U.S.A, Europe, Oirt, Latin.
Adjust System Setting
User can rotate the Encoder Volume Knob to
select the System Settings, then press
Power/Mute to confirm.
Beep Tone
To adjust the Beep Tone On/Off. The beep tone
feature allows the selection of an audible beep
tone to be heard each time a button is pressed
on the face of the radio.
Time Set
The time on the clock will be set to 12:00 as the
default. User can rotate the Encoder Volume
Konb to adjust the HOUR / MINUTE.
Preset Equalizer Setting
Under the Preset EQ Setting, there are the
below 8 different types of preset equalizer
available for user selection.
TIPS
Press and hold LIST button on the front panel
is to quick get into the Preset Equalizer
Setting menu.
E - 10
Page 13
TUNER OPERATIONS
Adjust Tuner Function
Press the FUNC button under Tuner mode
access into the Tuner Function menu. User can
rotate the Encoder Volume Knob to select the
below options:
OFF
Manual Store
Use this function to saved the current
frequency to memory stations. User can press
the Power/Mute to enter into the manual store
memory stations.
Auto Store
After Auto Stored & saved the 6 strongest
stations, the unit will automatically enter
present scan one time.
Local Seek
To receive more radio stations or only stations
with strong signal, you can adjust the tuner
sensitivity. User can press the Power/Mute to
turn On/Off the Local Seek mode.
[Local Seek On]: Only stations with strong
signal can be broadcast.
[Local Seek Off]: Stations with strong and
weak signals can be broadcast.
Tune To Radio Station
Press the BAND button to change between FM
bands and AM(MW) bands.
Tune To Preset Station
Press the LIST button to get into the preset
stations list, and user can use the Encoder
Volume Knob to select which preset station
he would listen to, and press the Power/Mute
button to confirm the selection.
Manual Seek
Press and hold buttons on front panel
to access into the Manual Seek mode.
/
Auto Seek
Press and hold buttons on front panel
to access into the Auto Seek mode, and the unit
will auto search for the next radio station.
/
E - 11
Page 14
MEDIA PLAYER OPERATIONS (Disc/USB/SD Card)
This unit can play various video / audio stored
into Disc / USB or SD Card on media player.
You can play commercially available audio CDs
and these Discs:
Digital Versatile Discs (MultiMedias)
Video Cds (VCDs)
Digital Versatile Discs Recordable
(MultiMedia+/-R)
Digital Versatile Discs Rewritable
(MultiMedia+/-RW)
Compact Discs (CDs)
CD Recordable (CD-R)
CD Rewritable (CD-RW)
Memory Card Operation
Insert The Memory Card
1. Press on the front panel to release the
panel.
2. After flipping down the front panel, push
rightwards, then draw the left of the panel.
3. Insert the Memory Card into the card slot,
then close the panel, the unit will play starts
automatically.
NOTE
Please ensure that the disc contains playable
content.
1. Press on the front panel to release the
panel.
2. Insert a CD with the printed side facing up,
then close the panel, the unit will play starts
automatically.
Press the BAND/ to pause the music
play. Press this button again to resume
music play.
Press the to skip forward to the
beginning of the next or previous chapter.
Press and hold the to fast
forward or fast rewind through the disc.
Press these buttons again to resume
normal playback.
/
/
3. Press to take out the CD.
Ensure that the memory card contains playable
music.
Remove The Memory Card
press the card until you hear a click sound, the
card is now disengaged. then remove the card.
Media Playing
Repeat
During the media playback, press the FUNC
button to adjust the different Repeat mode.
For MULTIMEDIA/VCD mode
USB Device Operation
[Repeat CH]: repeat playback the current the
[Repeat TT]: repeat playback the current title.
[Repeat Off]: cancel all the repeat function.
For MP3/WMA/CD mode
[Repeat Off]: play all tracks repeatedly
[Repeat One]:play the current track
[Repeat Folder]: play all tracks in the current
NOTE
chapter.
repeatedly
folder repeatedly
Flip open the USB plastic cover, insert the USB
device into the USB socket. The unit starts
playing from the USB device automatically.
NOTE
Ensure that the USB device contains playable
music.
Random
User can play audio tracks/files or VCD videos
in random order. During the playback, press
the FUNC button to turn On/Off the random
function.
E - 12
Page 15
MEDIA PLAYER OPERATIONS (Disc/USB/SD Card)
Skip/Search
1. Under the Media playback, press the LIST
button access into the playlist menu. User
can rotate the Encoder Volume Knob to
select the below options:
: to display all available audio folders
/ track.
: to display all available pictures
folders / files.
: to display all available video folders
/ files.
2. Under the MultiMedia playback mode, press
the LIST button can access into the
MultiMedia Root Menu.
Audio Channel
During the VCD playback, press the FUNC button
access into the Channel mode. Press the
Power/Mute to select the available audio channels
provided by the disc(Stereo, Left, Right ).
Video Setting
Under MultiMedia/VCD playback, press the
FUNC button access into the Video Setting
mode,the below Setup menu will appear:
[BRIGHT]: change the Bright level from 0
to 7.
[CONTRAST]: change the Contrast level
from 0 to 7.
[COLOR]: change the Color level from 0 to 7.
[Reset]: reset to default setting.
MULTIMEDIA Audio
During the MultiMedia playback, press the
FUNC button access into the MultiMedia Audio
to change the audio language (MultiMedia
only).
Subtitle Language
During the MultiMedia playback, press the
FUNC button access into the Subtitle to turn
On/Off subtitles and change the subtitles
(MultiMedia only).
PBC Playback
PBC playback allows you to play Video CDs
interactively. During the VCD playback, press
the FUNC button access into the Pbc mode,
press the Power/Mute to turn PBC On or Off.
[PBC On]: it will switch to OFF and continue
playback.
[PBC Off]: it will switch to ON and return to
menu screen.
TIPS
Press the LIST button on the front panel is
quick to turn the PBC On or OFF.
Angle
Under the FUNC menu, user can press Aangle
while playing a scene recorded with multiple
angles to change the angle (MultiMedia only).
Aspect Ratio
The TV Aspect setting allows the user to select
the aspect ratio of the TV (MultiMedia and VCD
only).
Under the FUNC menu, user can use the
Encoder Volume Knob to select the following
options:
4:3=Aspect ratio of TV is 4:3
16:8=Aspect ratio of TV is 16:9. Both wide
screen and 4:3 contents will fill the entire
screen.
E - 13
Page 16
Aux-In Mode
Select the AV Mode
Your can connect up to 1 AV device, press the
SOURCE button to enter into the Aux-In mode:
Aux - 1 IN = Front panel Aux in
AV - 2 IN = RCA back of unit
Aux -1 In
This unit is allowed to connect with external
Audio/Video system such like Digital Camera
or Game Console. User can connect the
external Audio/Video system thru the Aux-In
jack on front panel.
Connect the Aux-In
Connect the external signal to Aux-In jack
located at the front of the panel, then press
Source button to select Aux-In mode. Press
Mode Button again to cancel Aux-In mode and
retrun to previous mode.
Left Track
Right Track
Ground
AV - 2 In
Connect the external signal to the RCA line in
jack located at the rear of the unit , then press
SOURCE button to select AV -2 In.
TIPS
If there is no any external AV System input,
then the TFT will be show “ NO VIDEO
SIGNAL”.
E - 14
Page 17
SPECIFICATIONS
TFT Screen Section
Screen Size: 3.2"(Measured Diagonally)
Screen Type: TFT Liquid Crystal Display active matrix
Resolution: 320 x 240
MultiMedia / CD Section
Compatible Disc/Format
Signal to Noise Ratio
Dynamic Range
Frequency Response
Channel Separation
Video Section
Color System
Video Output
Video Input
Audio Section
Max Output Power
Load Impedance (speakers)
Line out level / load
Line out Impedance
Auxiliary Input Section
Frequency response
Input Maximum Voltage
Input Impedance
Radio Section
FM
Frequency Range
Usable Sensitivity
Stereo Separation
S/N Ratio
AM or MW
Frequency Range
Usable Sensitivity
S/N Ratio
General
Operating Voltage
Grounding System
Fuse:
Operating Temperature:
Unit Mounting Angle
See “ Disc Note” for more details description
> 90 dB
87.5-108.0 MHz (Europe)
< 15dB at S/N 30 dB
25 dB at 1KHz
50 dB
530-1720 (U.S.A)
522-1620 Khz (Europe)
< 40dB at S/N 20dB
40 dB
DC 11 -14.4V
Negative Ground
15-Amp Mini ATM Type
0 °C to 50 °C
32 °F to 122 °F
< 30
°
E - 15
Page 18
TROUBLESHOOTING
Before going through the check list, check wiring connection. If any of the problems persist after
check list has been made, consult your nearest service dealer.
Symptom
No power
Disc cannot be
loaded or ejected
No sound
The operation keys
do not work
Sound skips.
The radio does not
work.
The radio station
automatic selection
does not work.
ERROR
Disc Error
Cause
The car ignition is not on.
The fuse is blown.
Presence of CD disc inside
the player.
Inserting the disc in reverse
direction.
Compact disc is extremely
dirty or defective disc.
Temperature inside the car is
too high.
Condensation.
Volume is in minimum.
Wiring is not properly
connected.
The built-in microcomputer is
not operating properly due to
noise.
If the power supply is properly connected to
the car accessory terminal, switch the ignition
key to “ACC”
Replace the fuse.
Remove the disc in the player, then
put a new one.
Insert the compact disc with the
label facing upward.
Clean the disc or try to play a new one.
Cool off or until the ambient temperature
returns to normal.
Leave the player to off for an hour or so,
then try again.
Adjust volume to a desired level.
Check wiring connection.
Press the RESET button.
Front panel is not properly fixed into
its place
Adjust the installation angle to less
than 30 degrees.
Clean the compact disc. Then try to play a
new one.
Insert the antenna cable firmly.
Select a station manually.
Press the eject button to correct the problem.
If the error code does not disappear, consult
your nearest service dealer.
Replace the disc.
If at any time in the future you should need to dispose of this product please
note that Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your Local Authority
or retailer for recycling advice.(Waste Electrical and Electronic Equipment
Directive)
E -16
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.