Planet VF-101-T, VF-102-R, VF-102SC-T, VF-101-R, VF-102SC-R User Manual

1

VF-10x-KIT

Optical Fiber Transnmission System

User’s Manual

2

Trademarks

Copyright  PLANET Technology Corp. 2010

Contents subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. The information in this manual is subject to change

without notice. All other trademarks belong to their respective owners.

Disclaimer

PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and

makes no warranty and representation, either implied or expressed, with respect to the quality, performance,

merchantability, or fitness for a particular purpose.

PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for any

inaccuracies or omissions that may have occurred.

Information in this User’s Manual is subject to change without notice and does not represent a commitment on the part of

PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User’s Manual. PLANET

makes no commitment to update or keep current the information in this User’s Manual, and reserves the right to make

improvements to this User’s Manual and/or to the products described in this User’s Manual, at any time without notice.

If you find information in this manual that is incorrect, misleading, or incomplete, we would appreciate your comments and

suggestions.

FCC Warning

This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the

user will be required to correct the interference at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user

may be required to take adequate measures.

Energy Saving Note of the Device

This power required device does not support Stand by mode operation.

For energy saving, please remove the DC-plug or push the hardware Power Switch to OFF position to disconnect the

device from the power circuit. Without remove the DC-plug or switch off the device, the device will still consuming power

from the power circuit. In the view of Saving the Energy and reduce the unnecessary power consuming, it is strongly

suggested to switch off or remove the DC-plug for the device if this device is not intended to be active.

WEEE Warning

To avoid the potential effects on the environment and human health as a result of the presence of

hazardous substances in electrical and electronic equipment, end users of electrical and electronic

3

equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted

municipal waste and have to collect such WEEE separately.

Revision

Video over Optical Fiber Media Converter User's Manual

For Models: VF-10x-T / VF-10x-R

Rev 1.0 (January 2010)

Part No.: 2350-AA3700-001

4

TABLE OF CONTENTS

1. INTRODUCTION............................................................................................................................................................. 5

1.1 CHECK LIST.......................................................................................................................................................... 5

1.2 INTRODUCTION TO VIDEO OVER FIBER CONVERTER.................................................................................... 5

1.3 KEY FEATURES .................................................................................................................................................... 6

1.4 PRODUCT SPECIFICATION ................................................................................................................................. 6

2. HARDWARE DESCRIPTION.......................................................................................................................................... 9

2.1 Front Panel ............................................................................................................................................................ 9

2.1.1 Ports connection .......................................................................................................................................... 9

2.1.2 LED Indicators ........................................................................................................................................... 10

2.2 Rear Panel ........................................................................................................................................................... 10

3 INSTALL THE CONVERTER.......................................................................................................................................... 11

3.1 Limitation.............................................................................................................................................................. 11

3.2 Stand-alone Installation........................................................................................................................................ 11

3.3 Chassis Installation and Rack Mounting .............................................................................................................. 12

3.4 Optional - DIN-Rail mounting ............................................................................................................................... 14

4 POWER INFORMATION ................................................................................................................................................ 16

5

1. INTRODUCTION

1.1 CHECK LIST

Check the contents of your package for following parts:

•

VF-10x-T – Video over Fiber Media Converter / Transmitter X 1

•

VF-10x-R – Video over Fiber Media Converter / Receiver X 1

•

5V / 2A Power Adapter X 2

•

User’s Manual X 1

If any of these pieces are missing or damaged, please contact your dealer immediately, if possible, retain the carton

including the original packing material, and use them against to repack the product in case there is a need to return it to us

for repair.

1.2 INTRODUCTION TO VIDEO OVER FIBER CONVERTER

This Video over Fiber Converter kit consists of a Video Transmitter, VF-10x-T, and a Video Receiver, VF-10x-R. It is a

digital fiber-optic transmission system which provides customer a cost-effective solution for transmission of 1 channel

uncompressed digital video and 1 reverse RS-422/485 async-data over one single fiber cable. It is adjustment free device

while providing high quality and real-time video. The plug-and-play design makes the installation more convenient and

easier. The system can be widely used in Intelligent Transportation Systems (ITS), Traffic Surveillance, security

monitoring, automation control, intelligent residential districts and so on.

Typical Applications

 Intelligent Transportation Systems(ITS)

 Toll Collection

 Traffic Surveillance

 Air Traffic Management(ATM)

 Rail Signaling

 Perimeter Alarms and Area Monitors

 Telemedicine and Teleconference

 Industrial Surveillance

 Intelligent Building