Ethernet over VDSL2 Converter
CO mode is at central side. The CPE or CO mode can be adjusted by
using a built-in DIP switch. For point-to-point connection, a CPE mode
VC-231 and a CO mode VC-231 must be setup as one pair of converters
to perform the connection.
Provides Superior Upstream and Downstream Transmission Performance
The VC-231 also defines symmetric band plan for the transmission
of upstream and downstream signals, the band plan performs higher
transmission quality in short range for central side (CO) in symmetric
mode. In all, when the VC-231 is in profile 17a operation mode, it
High Performance Ethernet over VDSL Solution
The PLANET VC-231 is an Ethernet-over-VDSL2 Converter with high
performance. It is designed based on two core networking technology,
Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The
VDSL2 technology offers absolutely fastest data transmission speed over
existing copper telephone lines without the need of rewiring. The VC-231
supports ultra-high performance to the pervasive telephone line network
with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps
for 1.4km long range connections.
Implements with Existing Telephone Copper Wires
The VC-231 is also a Long Reach Ethernet (LRE) converter providing
one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2
connection. By using the additional Splitter from package of VC-231, the
splitter can provide POTS splitter to share the existing phone line with
POTS; therefore it is no need of replacing the existing copper wiring. Just
plug the VC-231 with additional splitter into the existing RJ-11 telephone
jack and a high-performance VDSL2 network can be connected. The VC-
231 is ideal to be used as an Ethernet extender to an existing Ethernet
network.
provides long distance transmit with Ultra-high performance to the
pervasive telephone line network, and when the VC-231 is in 30a
operation mode, it gives short distance transmits with upstream and
downstream transmission giving wire speed performance.
VC-231
Key Features
Cost-Effective VDSL2 Profile 17a/30a CO / CPE bridge solution •
One box design, CO / CPE selectable via DIP Switch •
Defines symmetric band plan for the transmission of upstream •
and downstream signals
Complies with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX •
and IEEE 802.3x, Flow control Ethernet standards
DMT (Discrete Multi-Tone) line coding •
Half duplex Back pressure and IEEE 802.3x Full Duplex Pause •
frame flow control
One RJ-11 connector for VDSL port with VDSL connection, •
additional Splitter for POTS connection
Voice and data communication can be shared simultaneously •
based on the existing telephone wire
Delivers High-Demand Service Connectivity for ISP / Triple Play Devices
The VC-231 provides excellent bandwidth to satisfy the triple play devices
for home entertainment and communication. With the capability of
100/100Mbps symmetric data transmission, the VC-231 enables many
Multi-Media services to work on local Internet, such as VOD (Video on
Demand), Voice over IP, Video phone, IPTV, Internet caching server,
distance education, and so on.
Easy Installation
The Ethernet-over-VDSL2 Converter is plug-and-play design and fully
compatible with all kinds of network protocols. Moreover, the operating
status of each individual port and the whole system can be watched
via the rich diagnostic LEDs on the front panel. The VC-231 offers two
modes, CPE and CO, for application: CPE mode is used at client side and
One 10/100Mbps RJ-45 port, Auto-Negotiation and Auto-MDI/•
MDI-X
Supports up to 1536 bytes packet size, IEEE 802.1Q VLAN tag •
transparent
VDSL2 stand-alone transceiver for simple bridge modem •
application
Advantage of minimum installation time (Simply as Plug-and-•
Play)
Selectable target profile and target SNR margin •
Supports extensive LED indicators for network diagnosis •
Co-work with PLANET MC family Media Chassis (MC-700 / •
MC-1500/ MC-1500R)
Compact in size, easy installation •
Data Sheet
1
Applications
LAN1
LAN2
VC-231/CO VC-231/CPE
Up to 1.4km
Ethernet over VDSL2 and Telephone Network
LAN to LAN Connection
Main office/PBX,
Telco CO,
wire closet
VDSL2
Telephone wire
Splitter Splitter
Telephone wire
100Base-TX UTP
VDSL2
VDSL2
Telephone wire
100Base-TX UTP
VDSL2
VDSL2
UP to 1.4km
VDSL2
LAN2
Router
LAN1
Ethernet over VDSL2 and Telephone Network
Multi-LAN Connection
Main office/PBX,
Telco CO,
wire closet
VDSL2 Switch
(Multi-port CO)
Internet
VDSL2
Telephone wire
VC-231/CPE
VC-231/CPE
Splitter
Splitter
Ethernet Distance Extension
Two VC-231 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24
copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. With the additional splitter, the
telephone service can still be used while the VC-231 CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet
over VDSL2 Converter.
VC-231
MTU / MDU / Hospitality Solution
The VC-231 is a perfect solution to quickly provide cost-effective yet high speed network services to multi-unit buildings such as residential buildings
(multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network
installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various
broadband services can be easily provided.
2
Data Sheet