1. Package Contents
Management
1000 10/100
1000
10/100
2. Requirements
Thank you for purchasing PLANET 8/16/24-Port Gigabit 802.3bt
PoE++ Managed Injector Hub, UPOE-800G/UPOE-1600G/UPOE-
2400G. “802.3bt PoE++ Managed Injector Hub” mentioned in
this quick installation guide refers to the UPOE-800G/UPOE-1600G/
UPOE-2400G.
10/100/1000T
RJ45
Management Port
Model Name
10/100/1000T
Data + Power
Output Ports
10/100/1000T
Data
Input Ports
UPOE-800G 8 8 1
UPOE-1600G 16 16 1
UPOE-2400G 24 24 1
Open the box of the 802.3bt PoE++ Managed Injector Hub and
carefully unpack it. The box should contain the following items:
The 802.3bt PoE++ Managed Injector Hub x 1
Quick Installation Guide x 1
Power Cord x 1
Rubber Feet x 4
19” Rack-mounting Brackets x 2
If any item is found missing or damaged, please contact your local
reseller for replacement.
Workstations running Windows XP/2003/Vista/7/8/2008/10, MAC
OS X or later, Linux, UNIX, or other platforms are compatible
with TCP/IP protocols.
Workstations are installed with Ethernet NIC (Network Interface
Card)
Ethernet Port Connection
Network cables -- Use standard network (UTP) cables with
RJ45 connectors.
The above PC is installed with Web browser.
It is recommended to use Internet Explorer 8.0 or
above to access the 802.3bt PoE++ Managed
Injector Hub. If the Web interface of the 802.3bt
Note
PoE++ Managed Injector Hub is not accessible,
please turn off the anti-virus software or firewall and
then try it again.
– 1 – – 2 –
3. Starting Web Management
The following shows how to start up the Web Management of
the 802.3bt PoE++ Managed Injector Hub. Note the 802.3bt
PoE++ Managed Injector Hub is congured through an Ethernet
connection. Please make sure the manager PC must be set to the
same IP subnet address.
For example, the default IP address of the 802.3bt PoE++
Managed Injector Hub is 192.168.0.100, then the manager
PC should be set to 192.168.0.x (where x is a number
between 1 and 254, except 100) and the default subnet mask is
255.255.255.0.
PC / Workstation with
Web Browser
192.168.0.x
Figure 3-1: IP Management Diagram
Gigabit 802.3bt PoE++ Managed Injector Hub
IP Address:
192.168.0.100
Figure 3-2: Web Login Screen
3. After entering the password, the main screen appears as
Figure 3-3 shows.
The following web screen is based on the UPOE2400G. The displays of the UPOE-800G and UPOE-
Note
1600G are the same as that of the UPOE-2400G.
Logging in to the 802.3bt PoE++ Managed Injector Hub
1. Use Internet Explorer 8.0 or above Web browser and enter IP
address http://192.168.0.100 to access the Web interface.
2. When the following dialog box appears, please enter the default
user name and password “admin”. The login screen in Figure
3-2 appears.
Default Username: admin
Default Password: admin
– 3 – – 4 –
Figure 3-3: Web Main Screen of 802.3bt PoE++ Managed Injector Hub
The 802.3bt PoE++ Managed Injector Hub Menu on the left of
the Web page lets you access all the commands and statistics the
802.3bt PoE++ Managed Injector Hub provides.
Figure 3-4: 802.3bt PoE++ Managed Injector Hub Menu
Management
1000 10/100
Reset
SYS PWR
PoE Fail
FAN1 FAN2
Fail
1 32 4
1
32
4
ACTLNK
1000
ACTLNK
10/100
UPOE-2400G
bt PoE-in-Use
at/af PoE-in-Use
Reset
Now, you can use the Web management interface to continue the
802.3bt PoE++ Managed Injector Hub management. Please
refer to the user’s manual for more.
4.RecoveringBacktoDefaultConguration
IP Address has been changed or admin password has
been forgotten –
To reset the IP address to the default IP Address “192.168.0.100”
or reset the login password to default value, press the reset
button on the front panel for about 5 seconds. After the device is
rebooted, you can log in the Web interface management within the
same subnet of 192.168.0.xx.
5. Customer Support
Thank you for purchasing PLANET products. You can browse our
online FAQ resource and User’s Manual on PLANET Web site rst
to check if it could solve your issue. If you need more support
information, please contact PLANET switch support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq
Switch support team mail address:
support@planet.com.tw
UPOE-800G/1600G/2400Gv2 User’s Manual
https://www.planet.com.tw/en/support/downloads?&method=keywo
rd&keyword=UPOE&view=3#list
Figure 4-1: 802.3bt PoE++ Managed Injector Hub Reset Button
– 5 – – 6 –
Copyright © PLANET Technology Corp. 2019.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.