Planet UPOE-1600G, UPOE-800G Installation Manual
1. Package Contents
PC/Workstation with
Management
1000 10/100
1000
10/100
2. Requirements
Thank you for purchasing PLANET 8/16-Port Gigabit 60W
Ultra PoE Managed Injector Hub, UPOE-800G/UPOE-1600G.
“Ultra PoE Managed Injector Hub” mentioned in this quick
installation guide refers to the UPOE-800G/UPOE-1600G.
Model Name
10/100/1000T
Data + Power
Output Ports
10/100/1000T
Data
Input Ports
10/100/1000T
RJ45
Management Port
UPOE-800G 8 8 1
UPOE-1600G 16 16 1
Open the box of the Ultra PoE Managed Injector Hub and
carefully unpack it. The box should contain the following items:
The UPOE-800G or UPOE-1600G x 1
Quick Installation Guide x 1
Power Cord x 1
Rubber Feet x 4
19” Rack-mounting Brackets x 2
If any item is found missing or damaged, please contact your
local reseller for replacement.
Workstations running Windows XP/2003/Vista/7/8/2008/10,
MAC OS X or later, Linux, UNIX, or other platforms are
compatible with TCP/IP protocols.
Workstations are installed with Ethernet NIC (Network Inter-
face Card)
Ethernet Port Connection
Network cables -- Use standard network (UTP) cables with
RJ45 connectors.
The above PC is installed with Web browser and JAVA
runtime environment plug-in.
It is recommended to use Internet Explore 8.0 or
above to access the Ultra PoE Managed Injector
Hub. If the Web interface of the Ultra PoE
Managed Injector Hub is not accessible, please
Note
turn off the anti-virus software or firewall and
then try it again.
– 1 – – 2 –
3. Starting Web Management
The following shows how to start up the Web Management
of the Ultra PoE Managed Injector Hub. Note the Ultra PoE
Managed Injector Hub is congured through an Ethernet
connection. Please make sure the manager PC must be set to
the same IP subnet address.
For example, the default IP address of the Ultra PoE Managed
Injector Hub is 192.168.0.100, then the manager PC should
be set to 192.168.0.x (where x is a number between
1 and 254, except 100) and the default subnet mask is
255.255.255.0.
Web Browser
192.168.0.x
Figure 3-1: IP Management Diagram
Gigabit 60W Ultra PoE Managed Injector Hub
IP Address:
192.168.0.100
RJ45 Management Port
Figure 3-2: Web Login Screen
3. After entering the password, the main screen appears as
Figure 3-3 shows.
The following web screen is based on the UPOE1600G. The display of the UPOE-800G is the
Note
same as that of the UPOE-1600G.
Logging in to the Ultra PoE Managed Injector Hub
1. Use Internet Explorer 8.0 or above Web browser and enter IP
address http://192.168.0.100 to access the Web interface.
2. When the following dialog box appears, please enter the
default user name and password “admin”. The login screen
in Figure 3-2 appears.
Default Username: admin
Default Password: admin
– 3 – – 4 –
Figure 3-3: Web Main Screen of Ultra PoE Managed Injector Hub
The Ultra PoE Managed Injector Hub Menu on the left of the
Web page lets you access all the commands and statistics the
Ultra PoE Managed Injector Hub provides.
Figure 3-4: Ultra PoE Managed Injector Hub Menu
Now, you can use the Web management interface to continue
the Ultra PoE Managed Injector Hub management. Please refer
to the user’s manual for more.
4.RecoveringBacktoDefaultConguration
IP Address has been changed or admin password has
been forgotten –
To reset the IP address to the default IP Address
“192.168.0.100” or reset the login password to default
value, press the reset button on the front panel for about 10
seconds. After the device is rebooted, you can login the Web
interface management within the same subnet of 192.168.0.xx.
5. Customer Support
Thank you for purchasing PLANET products. You can browse
our online FAQ resource and User’s Manual on PLANET Web
site rst to check if it could solve your issue. If you need more
support information, please contact PLANET switch support
team.
PLANET online FAQ:
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address:
support_switch@planet.com.tw
UPOE-800G User’s Manual:
http://www.planet.com.tw/en/support/download.
php?type1=2&model=48838&type=3
UPOE-1600G User’s Manual:
http://www.planet.com.tw/en/support/download.
php?type1=2&model=48839&type=3
UPOE-1600G
SYS PWR
PoE Fail
FAN1 FAN2
Fail
16-Port Gigabit 60W Ultra PoE Managed Injector Hub
1000 10/100
Reset
Management
ACTLNK1000
PoE In-use
ACTLNK10/100
Ultra
60W
AT
30W
1 3 5 72 4 6 8 9 11 13 1510 12 14 16
60W PoE In-use
at/af PoE In-use
Figure 4-1: Ultra PoE Managed Injector Hub Reset Button
– 5 – – 6 –
600W
450W
300W
150W
PoE Power Usage (W)
Copyright © PLANET Technology Corp. 2016.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other
trademarks belong to their respective owners.
Loading...