PLANET POE-152S User Manual

1. Package Content

Hint

3. Product Specication

Thank you for purchasing PLANET IEEE 802.3af PoE Splitter, POE-152S. Terms of “802.3af PoE Splitter” in following section of this User’s Manual means the POE-152S.

Upon open the box of the 802.3af PoE Splitter and carefully unpack it. The box should contain the following items:

l The Power over Ethernet Splitter x 1

l User’s Manual x 1

l 15cm UTP straight network cable x 1

l DC Plug cable x 2

If any item is found missing or damaged, please contact your local reseller for replacement.

2. Product Features

u Complies with IEEE 802.3af, PoE, IEEE 802.3/802.3u/

802.3ab 10/100/1000Base-T Ethernet standard

u Splits the 48V DC power over RJ-45 Ethernet cable into

different DC output

u LED indicators power input indication

u Distance up to 100 meters

u Two different output voltage options (5V/2A, 12V/1A)

u Auto-detect IEEE 802.3af PoE devices, protect devices

from being damaged by incorrect installation

u EIA568, category 5/5e/6, 2/4-pair cables for 10Base-T or

100Base-TX and 1000Base-T

Model POE-152S

IEEE 802.3af, IEEE 802.3,

Standard

Ethernet Connector

Data Rate

DIP Switch 5VDC / 12VDC output voltage

Number of Device can be powered

Ethernet Cable TIA/EIA-568, Category 5/5e/6 cable

LED Indicator 1 x PoE ready/in-use

Operating Environment

Storage Environment -10~70 Degree C, 5%~90%RH

Dimension (W x D x H)

Weight 50g

Emission FCC Class A, CE mark

Standard Compliance

IEEE 802.3u, IEEE 802.3ab 10/100/1000Base-T

2 x RJ-45 (1 for Data + DC in, 1 for Data out)

10/100/1000Mbps (vary on Ethernet device attached)

0~50 Degree C, 5%~90%RH

73 x 55 x 24 mm

IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3af Power over Ethernet

– 1 – – 2 –

4. Product Outlook

Figure 1 shows a front panel of 802.3af PoE Splitter.

Figure 1: POE-152S Outlook

LED Indicators

LED Color Function

PoE ready / in-use

Green

Lights to indicate the port is providing 48VDC in-line power.

5. Installation

If your network environment is very difcult to nd a

power socket for your AC-DC Adapter of networked device, the POE-152S provide DC power for this Ethernet Device conveniently and easily.

The POE-152S separates the power out and provide two kind of DC power output through its DIP switch and its voltage and current shown as below:

- 5V DC / 2A

- 12V DC / 1A

The default value will be set on 5V.

Please check the power requirement of the device that is going to get the power from POE-152S. If the power requirement is higher than POE-152S can supply, current overload will shutdown the POE-152S itself. Thus, it will shutdown your device as well.

"PLANET POE-152" and POE-152S can be installed in pair. However, use of third-party device is allowed if the device complied with IEEE 802.3af standard.

– 3 – – 4 –

Hardware Installation

Switch

POE-152

Gigabit

Wireless AP

POE-152S

100 meters

DC DC

Power

Data

Power

Data

PoE

1000Base-T UTP

PoE

1000Base-T UTP with PoE

Power Line (DC)

Power

Data

Warning

Caution

Gigabit 802.3af in-line power Switch

POE-152S

100 meters

Power

Data

PoE

Power

Data

Gigabit

Wireless AP

1000Base-T UTP

PoE

1000Base-T UTP with PoE

Power Line (DC)

Hint

1. Connect standard UTP cable from “Ethernet+DC” of POE-152 to “Ethernet+DC” of POE-152S. The POE LED of POE-152S / POE-152 will remains on.

The POE-152S accept IEEE 802.3af device; other in-line power device cause the POE-152S malfunction.

2. Connect the UTP cable from the RJ-45 port of remote device.

3. Connect DC plug from device.

Please ensure the output voltage is correct for remote device. Otherwise, it will damage your remote device.

4. Power on the remote device and its LED indicator remains on.

“Ethernet” of POE-152S to

“DC OUT” of POE-152S to remote

– 5 – – 6 –

Connect with 802.3af devices

The POE-152S also make non IEEE 802.3af devices with possibility to connect with IEEE 802.3af in-line power device.

With IEEE 802.3af standard; the POE-152S also can co-work with IEEE 802.3af end-span switch that feeding power over pin 1, 2, and 3, 6.

Customer Support

Browse FAQ resource at the PLANET Web site rst to check

if it could solve you issue. Need more support information, please contact PLANET switch support team.

PLANET online FAQ : http://www.planet.com.tw/en/support/faq.php?type=2

Switch support team mail address : support_switch@planet.com.tw

Copyright © PLANET Technology Corp. 2010. Contents subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners.