Planet MC-1600MR48 User Manual
User's Manual
MC-1600MR
MC-1600MR48
16-Slot Web Smart Media
Converter Chassis
- 1 -
- 2 -
Trademarks
Copyright © PLANET Technology Corp. 2007.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective
owners.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in all environments and applications,
and makes no warranty and representation, either implied or expressed, with respect to the quality, performance,
merchantability, or fitness for a particular purpose.
PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for any
inaccuracies or omissions that may have occurred.
Information in this User’s Manual is subject to change without notice and does not represent a commitment on the
part of PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User’s
Manual. PLANET makes no commitment to update or keep current the information in this User’s Manual, and
reserves the right to make improvements to this User’s Manual and/or to the products described in this User’s
Manual, at any time without notice.
If you find information in this manual that is incorrect, misleading, or incomplete, we would appreciate your
comments and suggestions.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the Instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the
user may be required to take adequate measures.
WEEE Warning
To avoid the potential effects on the environment and human health as a result of the presence of
hazardous substances in electrical and electronic equipment, end users of electrical and electronic
equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of
WEEE as unsorted municipal waste and have to collect such WEEE separately.
Revision
PLANET Web Smart Media Converter Chassis User’s manual
MODEL: MC-1600MR / MC-1600MR48
REVISION: 1.0 (MARCH.2007)
Part No.: EM-MC1600M_v1.0 (2080-AA3450-000)
- 3 -
TABLE OF CONTENTS
1. INTRODUCTION.......................................................................................................................................... 4
1.1 PACKAGE CONTENTS ................................................................................................................................. 4
1.2 HOW TO USE THIS MANUAL ........................................................................................................................4
1.3 ABOUT THE WEB SMART MEDIA CONVERTER CHASSIS ................................................................................ 5
1.4 FEATURES ................................................................................................................................................. 5
1.5 SPECIFICATION .......................................................................................................................................... 6
2. HARDWARE INSTALLATION ....................................................................................................................7
2.1 FRONT PANEL ............................................................................................................................................ 7
2.2 REAR PANEL.............................................................................................................................................. 8
2.3 WEB SMART MEDIA CONVERTER CHASSIS INSTALLATION............................................................................. 9
3. WEB SMART MEDIA CONVERTER CHASSIS MANAGEMENT............................................................ 13
3.1 OVERVIEW ............................................................................................................................................... 13
3.2 MANAGEMENT METHODS .......................................................................................................................... 13
3.2.1 Local Console Management...........................................................................................................13
3.2.2 Web Management...........................................................................................................................14
3.3 ASSIGNING AN IP ADDRESS TO THE WEB SMART MEDIA CONVERTER CHASSIS ...........................................14
3.4 LOGGING ON TO THE WEB SMART MEDIA CONVERTER CHASSIS ................................................................. 15
4. CONSOLE INTERFACE............................................................................................................................16
4.1 CONNECT TO PC ................................................................................................................................. 16
4.2 LOGIN IN .................................................................................................................................................. 17
4.3 MAIN MENU SCREEN ................................................................................................................................17
4.4 GETTING STARTED ................................................................................................................................... 18
4.4.1 General Guidelines.........................................................................................................................18
4.4.2 Show command..............................................................................................................................19
4.4.3 Set command..................................................................................................................................23
4.4.4 Factory default................................................................................................................................27
4.4.5 Reboot.............................................................................................................................................28
4.4.6 Logout............................................................................................................................................. 29
5. WEB MANAGEMENT.................................................................................................................................30
5.1 LOGIN IN TO THE WEB SMART MEDIA CONVERTER CHASSIS ....................................................................... 30
5.2 CHASSIS STATUS .....................................................................................................................................31
5.3 CONVERTER STATUS................................................................................................................................32
5.4 SYSTEM CONFIGURATION ......................................................................................................................... 34
5.5 LOCATION SETTING ..................................................................................................................................37
5.6 REDUNDANT BACKUP SETTING ................................................................................................................. 38
5.7 PASSWORD SETTING ................................................................................................................................39
5.8 FIRMWARE UPGRADE ............................................................................................................................... 41
5.9 RESTORE SYSTEM DEFAULT .....................................................................................................................44
5.10 REBOOT SYSTEM ................................................................................................................................... 45
5.11 LOGOUT................................................................................................................................................. 46
6. LINK PASS THROUGH FUNCTION......................................................................................................... 48
6.1 LINK LOSS CARRY FORWARD (LLCF)........................................................................................................ 48
6.2 LINK LOSS RETURN (LLR) ........................................................................................................................ 49
7. TROUBLESHOOTING................................................................................................................................50
APPENDIX A NETWORKING CONNECTION...............................................................................................51
A.1 SWITCH‘S RJ-45 PIN ASSIGNMENTS ......................................................................................................... 51
A.2 RJ-45 CABLE PIN ASSIGNMENT .................................................................................................................51
- 4 -
1. INTRODUCTION
1.1 Package Contents
Thank you for purchasing PLANET Web Smart Media Converter Chassis, the Web Smart Media Converter Chassis
package shall contain following contents:
Check the contents of your package for following parts:
z Web Smart Media Converter Chassis with one power supply installed x1
z User's manual CD x1
z Quick Installation Guide x1
z RS-232 console cable x1
z Power Cord x1
z Two Rack-Mounting Brackets with attachment screws x1
If any of these pieces are missing or damaged, please contact your dealer immediately, if possible, retain the carton
including the original packing material, and use them against to repack the product in case there is a need to return it to
us for repair.
1.2 How to Use This Manual
The Web Smart Media Converter Chassis User’s Manual is structured as followings:
Section 2, Hardware Installation
It explains the functions of Web Smart Media Converter Chassis and how to install the Web Smart Media Converter
Chassis.
Section 3, Web Smart Media Converter Chassis Management
It contains information about how to manage the Web Smart Media Converter Chassis.
Section 4, Console Interface
It contains information about the smart function from the console interface of Web Smart Media Converter Chassis.
Section 5, Web Management
It contains information about the smart function from the Web interface of Web Smart Media Converter Chassis.
Section 6, Link Pass Through Function
It contains detail explanation about the Link Pass Through function.
Section 7, Troubleshooting
It contains troubleshooting guide of Web Smart Media Converter Chassis.
Appendix A
It contains cable information of Web Smart Media Converter Chassis.
In the following section, the term “Web Smart Media Converter Chassis” means the MC-1600MR and MC-1600MR48.
- 5 -
1.3 About the Web Smart Media Converter Chassis
The Web Smart Media Converter Chassis provides one management module and 16-Slots for optional FST-8/ GST-7
series Fast / Gigabit Ethernet Smart Media converter installation, with hot-swappable feature and the redundant link
function to avoid entire network down time. Its management function allows network administrators to monitor the slide in
connection status of converter module and configures the converter module via local console port and remote Web interface.
The MC-1600MR equip with one 100~240V AC power supply unit and MC-1600MR48 equip with one DC -48V power
supply unit on its standard package, both MC-1600MR and MC-1600MR48 provide one spare power supply unit slot for
option redundant power supply installation. A redundant power supply is also provided to enhance the reliability with options of either 100~240V AC power supply unit or DC -48V power supply unit.
1.4 Features
◆ High quality 19”Rack-Mountable Chassis installation
◆ Supports up to sixteen hot-swappable slide-in modular media converter
◆ One 10/100Mbps Fast Ethernet port and one RS-232 port for management
◆ Two power slots at rear panel for redundant power support with options of 100~240V AC or -48V DC supply
◆ Reduces the effort of converter’s maintenance and management
◆ LED indicators for system and fan status, up to two fans installation of increased air-flow for system cooling
◆ Supports the PLANET smart Fast Ethernet and Gigabit Ethernet Media Converter FST-8 and GST-7 series
◆ Auto-MDI / MDI-X for 10/100Base-TX port
◆ Manageable through local console and remote Web interface
◆ EMI standards comply with FCC, CE class A
- 6 -
1.5 Specification
Model MC-1600MR MC-1600MR48
Hardware Specification
Dimension (W x D xH) 440 x 88 x 350mm, 2U
Slot 16 open converter slots (115 x 80 x 26mm, W x D x H)
2 power slot s (one fixed, one vacant* )
Power requirement 100-240V AC, 1.5A, 50-60Hz DC -48V, 2A
Power Output 5V DC per slot, 2A maximum
Power consumption 8.4 Watts / 28BTU (1 x power supply , not
include converters)
5.3 Watts / 18BTU (1 x power supply, not include converters)
120 Watts / 409BTU ( Full loading)
96 Watts / 327 BTU ( Full loading)
Operate environment 0~50 Degree C, 5%~90%RH
Storage environment -20~70 Degree C, 5%~90%RH
Emission FCC Class A, CE mark
Management Interface
Standards IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100Base-TX Fast Ethernet, IEEE 802.3x
Flow control
Fixed interface 10/100Base-TX port , RS-232 console port x1, Reset button x1
Speed Ethernet: 10/20Mbps for half / full-duplex, Fast Ethernet: 100/200Mbps for half / full-duplex
LED indicator System: MGM, Console: LNK/ACT, PWR ON x2, PWR FAIL x2, FAN FAIL x2
Remark: The device comes with one build in power module, to install the second power module into the vacant power slot, please consult
your local dealer.
- 7 -
2. HARDWARE INSTALLATION
This section describes the functionalities of MC-1600MR / MC-1600MR48 components and guides how to install the device
on the desktop or shelf. Basic knowledge of networking is assumed; please read this chapter completely before continuing
installs the Web Smart Media Converter Chassis.
2.1 Front Panel
The Web Smart Media Converter Chassis provides one management module and 16-Slots for optional FST-8/ GST-7
series Fast / Gigabit Ethernet Smart Media converter installation.
Figure 2-1: Web Smart Media Converter Chassis front panel
The LED indicators of the management module include power on, power fail, fan fail, MGM, Console and LNK/ACT. The
management module front panel in Figure 2-2 appears and the LED indicator in table 2-1 appears.
LED Indicators
LED Color LED Status Function
Lights On Indicate that the device has power.
PWR ON
Green
Lights Off Indicate that the device not receive power.
Lights On Indicate that power is inserted and failed to
work.
PWR FAIL
Amber
Lights Off Indicate that power is inserted and work
normal.
Lights On Indicate that fan is failed to work.
FAN FAIL
Amber
Lights Off Indicate that fan is work normally.
Light blink Indicate that CPU is working.
MGM
Green
Light Off Indicate that CPU is not working.
Light blink Indicate that console port is working.
CONSOLE
Green
Light Off Indicate that console port is not working.
Light On The link through that port is successfully
established.
LNK/ACT
Green
Light Off The link through that port is not established
or run at 10Mbps half / full duplex mode.
Table 2-1: LED Indicators from Management module front panel
Figure 2-2: Management module front panel
#
Notice:
Press the RESET button for 5 seconds, the Web Smart Media Converter Chassis will back to factory default mode; the
entire configuration will be erased.
- 8 -
2.2 Rear Panel
The MC-1600MR equip with one 100~240V AC power supply unit and MC-1600MR48 equip with one DC -48V power
supply unit on its standard package, both MC-1600MR and MC-1600MR48 provide one spare power supply unit slot for
option redundant power supply installation. A redundant power supply is also provided to enhance the reliability with options of either 100~240V AC power supply unit or DC -48V power supply unit.
Figure 2-3: Rear panel of Web Smart Media Converter Chassis
Install and remove the power supply unit
To install a power supply unit to Web Smart Media Converter Chassis, please fasten the hand screw clockwise and slide in
the power supply unit to the Web Smart Media Converter Chassis.
To remove a power supply unit out the Web Smart Media Converter Chassis, please loose the hand screw counter
clockwise and pull out the power supply unit from the Web Smart Media Converter Chassis.
Figure 2-4: Install and remove the power supply unit of Web Smart Media Converter Chassis
Power Notice:
1. The device is a power-required device, it means, it will not work till it is powered. If your networks should active all the
time, please consider using UPS (Uninterrupted Power Supply) for your device. It will prevent you from network data
loss or network downtime.
2. In some area, installing a surge suppression device may also help to protect your Web Smart Media Converter Chassis
from being damaged by unregulated surge or current to the Web Smart Media Converter Chassis.
- 9 -
2.3 Web Smart Media Converter Chassis Installation
The chapter describes how to install optional FST-8/ GST-7 series Fast / Gigabit Ethernet Smart Media converter into your
Web Smart Media Converter Chassis, please read the following topics and perform the procedures in the order being
presented.
To install your Web Smart Media Converter Chassis on a desktop or shelf, simply complete the following steps.
2.3.1 Desktop Installation
To install a Web Smart Media Converter Chassis on a desktop or shelf, simply completed the following steps:
Step 1: Attached the rubber feet to the recessed areas on the bottom of the Web Smart Media Converter Chassis.
Step 2: Place the Web Smart Media Converter Chassis on a desktop or shelf near an AC/DC power source.
Step 3: Keep enough ventilation space between the Web Smart Media Converter Chassis and the surrounding objects.
#Notice:
When choosing a location, please keep in mind the environmental restrictions discussed in Chapter 1, Section 5, Specification.
Step 4: Connect your Web Smart Media Converter Chassis to network administrator stations.
A. Connect one end of a standard network cable to the 10/100 RJ-45 port on the management module front panel of
the Web Smart Media Converter Chassis.
B. Start to manage the Web Smart Media Converter Chassis through the Microsoft Internet Explorer and etc.
#Notice:
Connection to the Web Smart Media Converter Chassis requires UTP Category 5 network cabling with RJ-45 tips. For
more information, please see the Cabling Specification in Appendix A.
Step 5: Supply power to the Web Smart Media Converter Chassis.
A. Connect one end of the power cable to the Web Smart Media Converter Chassis.
B. Connect the power plug of the power cable to a standard wall outlet then power on the Web Smart Media Converter
Chassis.
When the Web Smart Media Converter Chassis receives power, the Power LED should remain solid Green.
2.3.2 Rack Mounting
To install the Web Smart Media Converter Chassis in a 19-inch standard rack, follow the instructions described below.
Step 1: Place your Web Smart Media Converter Chassis on a hard flat surface, with the front panel positioned towards your
front side.
Step 2: Attach a rack-mount bracket to each side of the Web Smart Media Converter Chassis with supplied screws at-
tached to the package. Figure 2-5 shows how to attach brackets to one side of the Web Smart Media Converter
Chassis.
Figure 2-5 Attaching the brackets to the Web Smart Media Converter Chassis
- 10 -
Caution:
You must use the screws supplied with the mounting brackets. Damage caused to the parts by using incorrect screws
would invalidate your warranty.
Step 3: Secure the brackets tightly.
Step 4: Follow the same steps to attach the second bracket to the opposite side.
Step 5: After the brackets are attached to the Web Smart Media Converter Chassis, use suitable screws to securely attach
the brackets to the rack, as shown in Figure 2-6.
Figure 2-6 Mounting the Web Smart Media Converter Chassis in a Rack
Step 6: Proceed with the steps 4 and steps 5 of section 2.3.1 Desktop Installation to connect the network cabling and
supply power to your Web Smart Media Converter Chassis.
- 11 -
2.3.3 Slide Media Converter board into MC-1600MR /MR48 Chassis Installation
Step 1: unscrew and pull out the FST-80x /GST-70x Media Converter board.
Step 2: Remove a blank faceplate from an empty expansion slot on the front of the chassis. The FST-80x /GST-70x
Media Converter board can be installed in any expansion slot.
Step 3: Slide the FST-80x /GST-70x Media Converter board into the expansion slot, aligning it with the guide rails, until it
firmly connects to the chassis’ backplane.
Step 4: Secure the FST-80x /GST-70x Media Converter board to the chassis by tightening the thumbscrew.
- 12 -
2.3.4 Centralize management Media Converter application
Affording the current network grows and expanding, the PLANET MC-1600MR/MC-1600R48 provide advanced Media
conversion technology to fill this kind of demands. The Web Smart Media Converter chassis allows installing up to sixteen
FST-8 / GST-7 series of Fast /Gigabit Ethernet Smart Media converter with diverse fiber connect types of options to meet
different network applications. It is very flexible for FST-8 / GST-7 series to install into the central Web Smart Media
converter chassis for centralized management.
Once, the FST-8 / GST-7 series of Fast /Gigabit Ethernet Smart Media converter install into Web Smart Media Converter
chassis with hot swappable feature and redundant link function to avoid entire network downtime. The PLANET Web
Smart Media Converter chassis with FST-8 / GST-7 series of Fast /Gigabit Ethernet Smart Media converter are the ideal
solution for building a network solution of FTTC (Fiber to the Curb) and FTTB (Fiber to the Building) for ISPs, campuses
and enterprises.
- 13 -
3. WEB SMART MEDIA CONVERTER CHASSIS MANAGEMENT
This chapter describes how to manage the Web Smart Media Converter Chassis. Topics include:
- Overview
- Management methods
- Assigning an IP address to the Web Smart Media Converter Chassis
- Logging on to the Web Smart Media Converter Chassis
3.1 Overview
The Web Smart Media Converter Chassis provides a user-friendly, command line under console interface. Using this interface, you can perform various Web Smart Media Converter Chassis configuration and management activities, including:
Command Description
Show system Show software version, Mac address and IP address of Web Smart Media Converter Chassis.
Show IP Show current IP subnet address of Web Smart Media Converter Chassis.
Show power Show current power supply unit status of Web Smart Media Converter Chassis.
Show slot [n]
Show current per slot status of Web Smart Media Converter Chassis with FST-8 / GST-7 Media
Converter boards.
Show redundant [n] Show per redundant group status of Web Smart Media Converter Chassis.
Set slot [n]
Configure per slot setting of Web Smart Media Converter Chassis with various Media Converter boards.
Set redundant [n] disable /
enable
Disable or enable per redundant group of Web Smart Media Converter Chassis.
Set IP xxx.xxx.xxx.xxx,
mmm. mmm, mmm, mmm,
ggg.ggg.ggg.ggg
Assign IP address, subnet mask, and gateway of Web Smart Media Converter Chassis.
Set Pass [oldpass] [ newpass]
Change the default password of Web Smart Media Converter Chassis, the maximum length is
8 characters.
Factory Default Reset the Web Smart Media Converter Chassis to factory default mode.
Reboot Reboot the Web Smart Media Converter Chassis.
Logout Logout console interface of Web Smart Media Converter Chassis.
Please refer to the following Chapter 4 and 5 for the details.
3.2 Management Methods
There are two ways to manage the Web Smart Media Converter Chassis:
- Local Console Management via the serial port of Web Smart Media Converter Chassis.
- Web Management via a network or dial-up connection.
3.2.1 Local Console Management
You can manage the Web Smart Media Converter Chassis locally by connecting a VT100 terminal, or a personal computer
or workstation with terminal emulation software, to the serial port of Web Smart Media Converter Chassis. The terminal or
workstation connects to the serial port of Web Smart Media Converter Chassis. using a null modem cable that has the
appropriate connectors on each end.
This management method is ideal when:
- The network is unreliable.
- The Network Manager does not have direct network connection.
- 14 -
The serial port of Web Smart Media Converter Chassis. default setting is set to 19200 baud using a character format of 8
data bits, no parity, and 1 stop bit.
Therefore, configure the terminal or workstation to use these settings before you log on to the Web Smart Media Converter
Chassis. You can change this default setting, if desired, after you log on.
3.2.2 Web Management
You can manage the Web Smart Media Converter Chassis remotely by having a remote host with web browser, such as
Microsoft Internet Explorer or Netscape Navigator.
Using this management method:
The Web Smart Media Converter Chassis must have an Internet Protocol (IP) address accessible for the remote host.
3.3 Assigning an IP Address to the Web Smart Media Converter Chassis
To manage the Web Smart Media Converter Chassis remotely through the web browser with a Management Station, you
must assign an IP address to the Web Smart Media Converter Chassis.
To set the IP address, please use “set ip xxx.xxx.xxx.xxx mmm.mmm.mmm.mmm ggg.ggg.ggg.ggg” command.
For example, to configure the Web Smart Media Converter Chassis with the following IP settings:
IP Address: 192.168.0.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.254
Press the following command and press <Enter>
set ip 192.168.0.1 255.255.255.0 192.168.0.254
Then the following message appears under console interface:
The IP sets to 192.168.0.1
The netmask sets to 255.255.255.0
The gateway sets to 192.168.0.254
You can access the web interface of Web Smart Media Converter Chassis through the new IP address.
- 15 -
3.4 Logging on to the Web Smart Media Converter Chassis
When you log on to the Web Smart Media Converter Chassis console port for the first time, a sign-on string appears and
you are prompted for a console login user name and password.
The factory default login username and password is admin.
#Notice:
1. For security reason, please change and memorize the new password after this first setup.
2. Only accept command in lowercase letter under console interface.
- 16 -
4. CONSOLE INTERFACE
4.1 CONNECT TO PC
RS-232 serial cable
Use the bundled RS-232 serial cable and attach the 9-pin female connector to the male connector on the Web Smart
Media Converter Chassis. Plug the other side of this cable to your PC.
Hyper Terminal
In Windows 98/2000/ME/XP, launch “HyperTerminal”, create a new connection, and adjust settings as below:
Emulation: VT-100 compatible
Baud per second: 19200
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None
To gain a demo, please see the Figure 4-1.
Figure 4-1 Port Settings for console interface
Loading...