Planet MAP-3120 Specifications

MAP-3120
F
or truly Wireless network connectivity, PLANET Mesh Access Point, MAP-
3120, is designed with IEEE 802.11a/b/g standards and addressed on
providing a high performance mesh network. It provides local wireless
connectivity at any location over a self-adaptation mesh backhaul. All
mesh nodes can operate at 2.4GHz for long range and better penetration,
antennas design allows users to use proper antennas for various deploying
requirements.
Though there are multiple interfaces (LAN, WLAN, Backhaul) integrated
in MAP-3120, they are all bridged with one single IP. This is layer 2
operation. The layer 2 infrastructure is suitable for smaller scale mesh
network. Comparing with layer 3 operation, the configurations and
installations of a layer 2 infrastructure will be simpler and easier. Without
the extra resource consuming on routing, the overall performance of layer
2 operation is better than layer 3 operation.
To facilitate the administration task throughout the mesh network, PLANET
provides a centralized managing software: MAP Management System.
This software is built based on SNMP protocol and can be installed in a
computer. After launching, this software can locate and monitor all MAP-
3120 in the same network. The graphical interface allows administrator to
understand the whole network status in seconds.
Data Sheet
1
Key Features
Dual wireless interfaces for independent Backhaul link and local clients connection
2 x IEEE802.11a/b/g adapters
2 x reverse SMA connector
Completes AODV (Ad-Hoc On Demand Vector) routing (layer 2) between all node APs
Adjustable output power
Central management software
AES backhaul communication
IEEE 802.1q VLAN, multiple VLAN/SSID supports
IEEE 802.1x, IEEE802.1i WPA/ WPA2, and VPN pass-through mechanisms
Supports Wireless Separation, Watchdog mechanism
Supports SNMP v2c, v3
IEEE 802.3af Power over Ethernet capable
802.11a/b/g Indoor MESH Access Point – Layer 2
Applications
Enterprise / Warehouse Deployment
Each MAP-3120 forms an individual operational node, and it will automatically locate and associate to the existing Mesh network. Deploying with single IP segment, the MAP-3120 form a Layer 2 mesh network, which is easy to install and manage. As more equipments installed, the infrastructure can be expanded more flexible and easier. Thus it makes the perfect solution for medium scale deployment (less than 250 users), such as warehouses, and the Enterprise buildings.
Switch
Internet
MAP-3120
PLANET reserves the right to change specications without prior notice. All brand names and trademarks are property of their respective owners. Copyright © 2008 PLANET Technology Corp. All rights reserved.
PLANET Technology Corporation
11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C. Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 Email: sales@planet.com.tw www.planet.com.tw VoIP Gateway: vip.planet.com.tw
MAP-3120
Data Sheet
2
Specification
Product 802.11a/b/g Indoor MESH Access Point – Layer 2
Model MAP-3120
Wireless LAN
Wireless Standard
IEEE 802.11a IEEE 802.11b/g
Media Access Protocol CSMA / CA
RF Modulation
802.11a: OFDM
802.11g: OFDM
802.11b: DSSS
Data Rate
802.11b: 11 / 5.5 / 2 / 1Mbps, Auto
802.11a/g: 54 / 48 / 36 / 24 / 18 / 12 / 9 / 6Mbps, Auto
Transmit Power
20dBm max. Transmit Power levels adjustable
Sensitivity
802.11b:
-95dBm @1Mbps
-94dBm @2Mbps
-92dBm @5.5Mbps
-90dBm @11Mbps
802.11g
-90dBm @6Mbps
-89dBm @9Mbps
-87dBm @12Mbps
-85dBm @18Mbps
-82dBm @24Mbps
-79dBm @36Mbps
-76dBm @48Mbps
-74dBm @54Mbps
802.11a
-88dBm @6Mbps
-87dBm @9Mbps
-85dBm @12Mbps
-83dBm @18Mbps
-80dBm @24Mbps
-75dBm @36Mbps
-73dBm @48Mbps
-71dBm @54Mbps
Operating Channels
802.11a: 12 channels
802.11b/g: 11 / 13 / 14 channels
RF Connector 2 x Reversed SMA (WLAN1 / WLAN2)
Operating Mode
System Layer 2 Gateway Layer 2 Relay WLAN1 Backhaul mode WLAN2 AP mode
Infrastructure Type Layer 2 Repeating Auto-Channel Selection Yes WLAN Security WEP-64/128, WPA, WPA2 Hide SSID Yes Wireless Separation Yes
Ethernet
Ethernet Standard
IEEE 802.3, IEEE 802.3u, 10Base-T, 100Base-TX IEEE 802.3af Power over Ethernet
Operating Mode LAN x 5, local service
Ethernet Connector
10/100Base-TX, auto-negotiation IEEE 802.3af compliant for Public and LAN #1 ports (end-span device, powered via wire 1, 2, 3 & 6)
Loading...
+ 1 hidden pages