Planet IGS-801T User Manual

Download

IGS-801T

8-Port 10/100/1000Mbps Industrial Gigabit Ethernet Switch w/ Wide Operating Temperature

Physical Port

• 8-port 10/100/1000BASE-T RJ45 with auto MDI/MDI-X

function

Layer 2 Features

• Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-

TX, IEEE 802.3ab 1000BASE-T Ethernet standard

• Supports auto-negotiation and 10/100Mbps half/full duplex and

1000Mbps full duplex mode

• High-performance Store and Forward architecture, broadcast

storm control and runt/CRC ltering eliminate erroneous

packets to optimize the network bandwidth

Slim Type with More Practicability and Convenience

PLANET IGS-801T advanced, slim-type, industrial, hardened Gigabit Ethernet Switch

with IP30 metal case consists of 8 10/100/1000Mbps auto negotiation ports and thus, it

operates reliably in heavy industrial demanding environments.

Its compact IP30-rated metal case features either DIN rail or wall mount for the efcient

use of cabinet space.

Energy Saving with Lower Power Consumption

The IGS-801T, adopting the advanced green networking technology, provides the link-

on cable length power saving and link-down power saving methods. These features

makes the IGS-801T consume very low power in full load operation mode, which helps

conserve energy effectively but maintains high performance efciently.

Green Networking

With the Auto Power Saving and IEEE 802.3az Energy Efficient Ethernet (EEE)

Protocol, the IGS-801T can automatically detect cable link status and network traffic,

and thus is able to adjust power consumption accordingly. It enables the switches to

consume less power when they are less active.

• Prevents packet loss with back pressure (half-duplex) and

IEEE 802.3x pause frame ow control (full-duplex)

• 4K absolute MAC address and 16Gbps switching fabric

support

• 1.5Mbits SRAM packet buffer

• 9K jumbo packet size support

• IEEE 802.1p CoS support

• Automatic address learning and address aging

• CSMA/CD Protocol

Industrial Case and Installation

• IP30 metal case

• DIN rail and wall-mount design

• 12 to 48V DC, redundant power with polarity reverse protect

function and connective, removable terminal block for master

and slave power; 24V AC power support

• -40 to 75 degrees C operating temperature

Stable Performance under Difcult Environments

The IGS-801T provides a high level of immunity against electromagnetic interference

and heavy electrical surges which are usually found on plant oors or in curb-side trafc

control cabinets. Being able to operate under the temperature range from -40 to 75

degrees C, the IGS-801T can be placed in almost any difficult environment. The IGS-

801T also possesses an integrated power supply source with a wide range of voltages

(12 to 48V DC, 24V AC) for worldwide high availability applications requiring dual or

backup power inputs.

IP camera IP camera

IGS-801T

Control Room Robotic Automation

IGS-801T

Robotic Automation System

1000Base-T UTP

Robust Switch Performance

The IGS-801T offers high-performance switch architecture. With the 8 10/100/1000Mbps Gigabit Ethernet ports providing non-blocking switch fabric and wire-

speed throughput as high as 16Gbps and the 4K MAC address table, the IGS-801T can perform wire-speed packets transfer without risk of packet loss. The

ow control function enables the IGS-801T to provide fast and reliable data transfer. The Gigabit port with 9K jumbo frame supported can handle extremely

large amounts of data transmission in the industrial topology that forward data to central control room.

Plug and Play

All of the RJ45 copper interfaces in the IGS-801T support 10/100/1000Mbps auto negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e

cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.

Applications

Industrial Area Switch for Data Collection and Forwarding

The IGS-801T’s IP30-rated metal case is particularly designed for most heavy industrial demanding environments, such as factories, harbors, warehouses,

and more. When installed at these establishments, it can enhance the work performance of these establishments by speedily transferring incoming and

outgoing data.

Internet Camera

IGS-801T

Internet Camera

Control Center

Backbone Switch

100m

IGS-801T

Industrial Serial Converter

I/O

PLC

I/O

Robot Robot

I/O

Factory

100m

Internet Camera

IGS-801T

100m

Industrial Serial Converter

Serial Device Server

I/O

WarehouseHarbor

I/O

Internet Camera

PLC

100BASE-TX UTP

1000BASE-T UTP

DI/DO

Specications

IGS-801T

Model

Hardware Specications

10/100 /1000 BASE-T Ports 8

Dimensions (W x D x H) 135 x 87 x 32 mm

Weight 461g

Power Requirements 12~48V DC, redundant power with polarit y reverse protection function, 24V AC power support

Power Consumption/ Dissipation 6.72 watts/23BTU

Installation DIN rail kit and wall-mount ear

Switch Specications

Switch Processing Scheme Store-and-Forward

Address Table 4K

Buffer 1.5Mbits SRAM packet buffer

Flow Control

Switch Fabric 16Gbps Throughput (packet per second) 11. 9M pp s Jumb o Frame 9K

Network Cables

Standards Conformance

Standards Compliance

Temperature

Humidity Operating: 5% to 95%, Storage: 5% to 95% (non-condensing) Regulatory Compliance FCC Part 15 Class A, CE

IGS-801T

Back pressure for half duplex IEEE 802.3x pause frame for full duplex

10/100 /1000 BASE-T: Cat3, 4, 5, 5e, 6 UTP cable (100 meters, max.) EIA/ TIA-568 100- ohm STP (100 meters, max.)

IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control

IEEE 802.3az Energy Ef cient Ethernet

Operating: -40~75 degrees C Storage: -40~75 degrees C

Ordering Information

IGS-8 01T 8-port 10/100/1000Mbps Industrial Gigabit Ethernet Switch (-40~75 degrees C operating temperature)

Planet IGS-801T User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual