–Built-in RADIUS client to co-operate with the RADIUS
servers
–RADIUS/TACACS+ login user access authentication
• Access control list
–IPv4/IPv6 IP-based ACL
–MAC-based ACL
• MAC security
–Static MAC
–MAC ltering
• Port security for source MAC address entries ltering
• DHCP snooping to lter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IP source guard prevents IP spoong attacks
• DoS attack prevention
• SSH/SSL
Management
• IPv4 and IPv6 dual stack management
• Switch management interface
–Web switch management
–Telnet command line interface
–SNMP v1, v2c and v3
–SSH and SSL secure access
• User privilege levels control
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System maintenance
–Firmware upload/download via HTTP/TFTP
–Conguration upload/download through web interface
–Dual images
–Hardware reset button for system reboot or reset to
factory default
• SNTP Network Time Protocol
• Cable diagnostics
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• SNMP trap for interface link up and link down notication
• Event message logging to remote Syslog server
• Four RMON groups (history, statistics, alarms and events)
• PLANET smart discovery utility
2
IGS-801M
Applications
Multiple Spanning Tree Protocol with PoE IP Ofce Solution for SMBs/Workgroups
The IGS-801M features strong, rapid, self-recovery capability to prevent interruptions and external intrusions. It incorporates Multiple Spanning Tree Protocol
(802.1s MSTP) into customer’s automation network to enhance system reliability and uptime.
Office B
IGS-801M
IP PBX
CameraPCIP Phone
Internet
MSTP for Ring IP Surveillance Application
Speed
Dome
IGS-801M
NVR
AP
Office C
1000BASE-T UTP
AP
IP Phone
Office A
IGS-801M
Speed
Dome
PC
Server
Industrial Area Manageable Switch for Data Collection and Forwarding
The IGS-801M offers high performance and high reliability to make sure the continuous industrial operation in harsh environments such as control cabinet of
transportation, factory oors, outdoor space, and the places where the temperature is extremely low or high. With a non-blocking design and desktop size, the
installation of PLANET IGS-801M 8-port Gigabit Managed Industrial Ethernet Switch is as easy as that of a Fast Ethernet network and it is helpful to build a
Gigabit high-bandwidth switched network quickly.
To further expand the current network, the IGS-801M provides advanced Web and SNMP management interface to meet this kind of demand. With its built-in
web-based management, the IGS-801M offers an easy-to-use, platform-independent management and conguration facility. The IGS-801M supports standard
Simple Network Management Protocol (SNMP) that makes the managed switch able to be monitored via any standard-based management software. With
the IGS-801M, which complies with all the requirements of industrial applications, customers may enjoy high reliability, recovery capability and safe Ethernet
network operation.
IP Camera
802.11n AP
Factory
IGS-801M
Control Center
IGS-801M
Gigabit LAN
IGS-801M
Warehouse
IP Camera
802.11n AP
100BASE-TX UTP
1000BASE-T UTP
3
Specications
IGS-801M
Product
Hardware Specications
Hardware Version 2
Copper Ports 8 x 10/100/1000BASET RJ45 auto-M DI/MDI -X port
Switch ArchitectureStore-and-Forward
Switch Fabric16Gbps/non-blocking
Switch Throughput@64Bytes11. 9M pp s
Address Table 8K entries
Shared Data Buffer4.1 megabits
Flow Control
Jumb o Frame10K bytes
Reset Button
ESD Protection6KV DC
EnclosureIP30 metal case
Installation DIN rail kit and wall mount kit
Connector
AlarmOne relay output for power failure. Alarm relay current carry ability: 1A @ DC 24V
LED
Dimensions (W x D x H)135 x 87 x 32 mm, 1U height
Weight472g
Power Requirements
Power Consumption/ Dissipation
Layer 2 Functions
Port Mirroring
VLAN
Link Aggregation
Spanning Tree Protocol
IGMP Snooping
MLD SnoopingMLD (v1/v2) snooping, up to 256 multicast groups
Access Control ListIPv4/IPv6 IP-based ACL/MAC-based ACL
QoS
Security
IGS-801M
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
< 5 sec: System reboot
> 5 sec: Factory default
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
System:
Power 1, Power 2, Fault A larm
Ports:
10/100 Link/Act
1000 Link/Act
IEEE 802.3ad LACP and static trunk
Suppor ts 8 trunk groups with 8 por ts per trunk
STP, IEEE 802.1D Spanning Tree Protoc ol
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
MSTP, IEEE 802.1s Multiple Spanning Tree Protocol
IGMP (v2/v3) snooping
IGMP querier
Up to 256 multicast groups
8 mapping ID to 8 level priority queues
- Port number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP eld in IP packet
Trafc classication based, strict priority and WRR
IEEE 802.1X port-based authentication
Built-in RADIUS client to co-operate with RADIUS server
RADIUS/TACACS+ user access authentication
IP-MAC port binding
MAC lter ing
Static M AC address
DHCP Snooping and DHCP Option82
STP BPDU guard, BPDU ltering and BPDU forwarding
DoS attack prevention
ARP inspection
IP source guard
4
Management Functions
Web browser/Telnet/SNMP v1, v2c
Firmware upgrade by HTTP/TFTP protocol through Ethernet network
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Ser vice
IEEE 802.1Q VLAN tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICM P
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGM P version 3
RFC 2710 MLD version 1
RFC 3810 MLD version 2