Industrial 4-Port 10/100/1000T + 2-Port
100/1000X SFP Ethernet Switch
Physical Port
• 4-port 10/100/1000Base-T RJ-45 with auto MDI /
MDI-X function
• 2-port SFP slot interface, SFP supports 1000Base-X
and 100Base-FX transceiver via DIP switch congured
Fiber Port Redundancy
IGS-620TF
Flexible, Reliable and Industrial-grade Network Distance Extension Solution
PLANET IGS-620TF is an Industrial 6-port full Gigabit Ethernet Switch providing non-
blocking wire-speed performance and great flexibility for Gigabit Ethernet extension in
harsh industrial environment. It provides 4-port 10/100/1000Base-T RJ-45 copper and
2 extra 100/1000Base-X SFP fiber optic interfaces delivered in an IP30 rugged strong
case with redundant power system. The IGS-620TF is well suited for applications in
deploying surveillance system, and securing control and wireless service in climatically
demanding environments with wide temperature range from -40 to 75 degrees C.
Fiber-Optical Link Capability Enables Extension of Network Deployment
The two SFP slots are compatible with 100Base-FX or 1000Base-SX / LX / WDM
through SFP (Small Form Factor Pluggable) fiber-optic transceivers. The fiber optical
uplink capability guarantees the throughput to all nodes hooked into the network and the
Gigabit Ethernet distance can be extended from 550 meters (Multi-Mode ber cable) up
to 10/20/30/40/50/70/120 kilometers (Single-Mode fiber cable), also the Fast Ethernet
distance can be extended from 2km (Multi-Mode fiber cable) up to 20/40/60 kilometers
(Single-Mode fiber cable). They are well suited for applications within the factory data
centers and distributions.
Fiber Switch Mode
Gigabit
Ethernet Switch
—
1000
1000Base-X Fiber
Distance Extension
MGB-L120
MGB-L120
240km
IGS-620TF
Switch Mode
1000
1000Base-X Fiber
Gigabit
Ethernet Switch
• Link status auto-detect and redundant on Dual ports
with the same connector type
• Only Primary-Port is active at a time, the Backup-Port
is blocked
• When Primary-Port link failure occurs, the trafc will
swap to Backup-Port automatically.
• Once the Primary-Port status is back to link-up, the
trafc will swap from Backup-Port to Primary-Port.
Layer 2 Features
• Supports Auto-negotiation and 10/100Mbps half / full
duplex and 1000Mbps full duplex mode
• High performance Store and Forward architecture,
runt/CRC ltering eliminates erroneous packets to
optimize the network bandwidth
• Prevents packet loss with back pressure (Half-Duplex)
and IEEE 802.3x PAUSE frame ow control (Full-
Duplex)
• 9K Jumbo Frame Size support
• Backplane (Switching Fabric): 12Gbps
• Integrated address look-up engine, support 1K
absolute MAC addresses
• Automatic address learning and address aging
1000
1000Base-SX/LX Fiber-optic
• CSMA/CD Protocol
1
Adjustable 6-Port Switch Mode or 4 + 2 Fiber Redundant Mode
The two SFP slots allow to change the operation mode with its built-in DIP switch. Via
the built-in DIP switch, the IGS-620TF can be configured as 6-port Ethernet switch or
4+2 ber redundant mode. With the 6-port switch mode, the IGS-620TF can operate in
Store-and-Forward mechanism with high performance; on the other hand, when in the
4+2 fiber redundant mode, it provides rapid fiber redundancy of link for highly critical
Ethernet applications. The redundant mode also supports auto-recovering function. If the
destination port of a packet is link-down, it will forward the packet to the other port of
the backup pair.
IGS-620TF
Industrial Case / Installation
• Slim IP30 metal case protection
• DIN Rail and Wall Mount Design
• Redundant Power Design
–12 to 48V DC, redundant power with polarity
reverse protect function
–AC 24V power adapter acceptable
Site to Site Fiber Link Redundancy — ISP, Bank and Enterprise
Primary Link
1000Base-X Fiber
IGS-620TF
Redundant
Industrial Switch
10/100/1000Base-T UTP
Gigabit
Ethernet Switch
Location A
(Forwarding)
1000
10Km
Redundant Link
1000Base-X Fiber
(Disabled)
IGS-620TF
Redundant
Industrial Switch
10/100/1000Base-T UTP
Location B
1000Base-T UTP
1000
1000Base-SX/LX Fiber-optic
Gigabit
Ethernet Switch
Environmentally Hardened Design
The IGS-620TF is equipped with the slim-type IP30 metal case for easy deployment
in heavy Industrial demanding environments. With IP30 industrial case protection, the
IGS-620TF provides a high level of immunity against electromagnetic interference and
heavy electrical surges which are usually found on plant floors or in curb side traffic
control cabinets. Being able to operate under the temperature range from -40 to 75
degrees C, the IGS-620TF can be placed in almost any difficult environment. The
IGS-620TF also allows either DIN rail or wall mounting for efficient use of cabinet
space.
• Supports EFT protection 6000 VDC for power line
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
Convenient and Reliable Power System
To enhance the operation reliability and flexibility, the IGS-620TF is equipped with two
DC power input connectors for redundant power supply installation. It also possesses
an integrated power supply source with wide-ranging voltages (12 to 48V DC or 24V
AC) for worldwide high availability applications requiring dual or backup power inputs.
2
IGS-620TF
Application
Hardened Environment Application
The IGS-620TF Industrial Gigabit Ethernet Switch offers full port Gigabit speed. It provides very high reliability and security features to make sure the
continuous operation in harsh environments such as control cabinet of transportation, factory, outdoors and places where extreme low or high temperatures
can be experienced. Moreover, the IGS-620TF is also compatible with 100Mbps and 1000Mbps SFP transceivers to provide a strong, stable and long-
distance connection and exible industrial networking deployment.
IP Camera IP Camera
IGS-620TF
IGS-620TF
1000
30km
IGS-620TF
Winter Season of Country
Weather Station
30km
1000
IP Camera
Data Center
30km
1000 1000
IGT-1205AT
120km
1000
120km
70km
1000
Fiber
Switch
IP Camera
Steel Factory
30km
IGT-1205AT
IGS-620TF
1000
30km
Desert
IP Camera
IP Camera
1000
IGS-620TF
100Base-TX UTP
1000
1000Base-SX/LX Fiber-optic
Redundancy Application
The IGS-620TF Industrial Gigabit Ethernet Switch provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant-mode
supports auto-recover function. If the destination port of a packet is link-down, it forwards the packet to the other port of the backup pair.
Link Path Redundant to Critical Network Service
Server
(ATM/
IP Camera/
Security Machine)
1000Base-T UTP
1000Base-SX/LX Fiber-optic
Data Server
Gigabit
Ethernet Switch
Gigabit
Ethernet Switch
1000
Primary Link
1000Base-X Fiber
(Forwarding)
Redundant Link
1000Base-X Fiber
(Disabled)
IGS-620TF
Redundant
Industrial Switch
1000
3
Specications
IGS-620TF
Model
Hardware Specications
Copper Ports
SFP / mini-GBIC Slots
DIP Switch
Connector
Alarm
LED
ESD Protection 6KV DC
EFT Protection 6KV DC
Enclosure IP30 type metal case
Installation DIN rail kit and wall mount ear
Dimensions (W x D x H) 135 x 87 x 32mm
Weight 503g
Power Requirements
Power Consumption / Dissipation 7.2watts / 24BTU
Twi st ed -P ai r
Cable
Fiber-Optic Cable
Switch Specication
Switch Processing Scheme Store-and-Forward
Address Table 1K ent ries
Flow Control Back pressure for half duplex
Switch fabric IEEE 802.3x Pause Frame for full duplex
Throughput (packet per second) 8.93Mpps@64bytes
Maximum Transmit Unit 9216 by tes
Speed
Standards Conformance
Standards Compliance
IGS-620TF
4 x 10/100/1000Base-T RJ-45 TP
Auto-MDI/MDI-X, Auto-Negotiation
2 1000Base-SX /LX/BX SFP interfaces (Port-5 and Port-6)
Compatible with 100Base-FX SFP
DIP-1: SFP Port 5 1000Base-X (default) / 100Base-FX
DIP-2: SFP Port 6 1000Base-X (default)/ 100Base-FX
DIP-3: Switch mode / Fiber Redundant mode
Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Provides one relay output for power failure
Alarm Relay current carry ability: 1A @ DC 24V
3 x LED for System and Power:
Green: DC Power 1
Green: DC Power 2
Green: Power Fault
2 x LED for Per Copper Port (Port-1~Port-4):
Green: 1000 LNK/ACT
Orange:100 LNK/ACT
1 x LED for Per mini-GBIC interface (Port-5 and Port-6)
Green: LNK/ACT
DC 12~48V or AC 24V
Redundant power with polarity reverses protection function
10Base-T: 2-Pair UTP CAT. 3, 4, 5, up to 100 meter s
100Base-TX: 2-Pair UTP CAT. 5, 5e up to 100 meters
1000Base-T: 4-Pair UTP CAT. 5e, 6 up to 100 meters
1000Base-SX :
50/125μm or 62.5/125μm multi -mode ber optic cable, up to 550m
1000Base-LX :
9/125μm single-mode ber optic cable, up to 10/20/30/40/50/ 70/120 kilometers (vary on SFP module)
100Base-FX :
50/125μm or 62.5/125μm multi -mode ber optic cable, up to 2 kilometers
9/125μm single-mode ber optic cable, up to 20/40/60 kilometers (vary on SFP module)
SX/L X: 2000 Mbps (full- duplex)
FX: 200Mbps (full-duplex)
TP: 10/20Mbps, 100/200Mbps, 2000Mbps
IEEE 802.3 Ethernet / 10Base-T
IEEE 802.3u Fast Ethernet / 100Base-TX
IEEE 802.3ab Gigabit Ethernet / 1000Base-T
IEEE 802.3z Gigabit Ethernet / 1000 Base-SX /LX
IEEE 802.3x Full-Duplex Flow Control
4
Regulation Compliance FCC Part 15 Class A, CE
IEC60068 -2-32(Free fall)
Stability Testing
IEC60068-2-27(Shock)
IEC60068-2-6(Vibration)
Environment
Temperature
Humidity
Operating: -40~75 degrees C
Storage: -40~75 degrees C
Operating: 5~95% (Non-condensing)
Storage: 5~95% (Non-condensing)
Dimensions
Side View
1 2 3 4 5 6
Input DC 12~48V, AC 24V
V1-
PWR1
V1+
Fault
V2-
PWR2
V2+
ON
1 2 3
Port 5
Port 6
Mode
IGS-620TF
Bottom View
ON OFF
100FX
Port 5
1000X
100FX
Port 6
1000X
Redundant
Fiber Mode
Switch
Front View
P1 P2 FAULT
1000X
SFP
6
LNK /
ACT
1000X
SFP
5
LNK /
ACT
100 LNK/ACT
1000 LNK/ACT
IGS-620TF
Top View Rear View
Mounting Kit
4
3
2
1
DIN-Rail Kit
Mounting Kit
Dimensions ( unit = mm )
5
Ordering Information
IGS-620TF Industr ial 4-Port 10/100/1000T + 2-Port 100/1000X SFP Ethernet Switch
Related SFP Transceivers
Fast Ethernet Transceiver (100Base-X SFP)
IGS-620TF
Model Speed (Mbps)
Connector
Interface
Fiber Mode Distance Wavelength (nm) Operating Temp.
MFB-FX 100 LC Multi Mode 2km 1310nm 0 ~ 60OC
MFB-F20 10 0 LC Single Mode 20km 1310nm 0 ~ 60
MFB-F40 100 LC Single Mode 40km 1310nm 0 ~ 60
MFB-F60 100 LC Single Mode 60km 1310nm 0 ~ 6 0
MFB- F120 100 LC Single Mode 120km 1550nm 0 ~ 60
MFB-TF X 100 LC Multi Mode 2km 1310 nm -40 ~ 75
MFB-TF 20 100 LC Single Mode 20km 1550nm -40 ~ 75
Fast Ethernet Transceiver (100Base-BX, Single Fiber Bi-Directional SFP)
Model Speed (Mbps)
MFB-FA20 100 WDM(LC) Single Mode 20km 1310nm 1550nm 0 ~ 60OC
MFB-FB20 100 WDM(LC) Single Mode 20km 1550nm 1310 nm 0 ~ 60
MFB-TFA 20 100 WDM(LC) Single Mode 20km 1310nm 1550nm -40 ~ 75
MFB-TFB20 100 WDM(LC) Single Mode 20km 1550nm 1310 nm -40 ~ 75
MFB-TFA 40 100 WDM(LC) Single Mode 40km 1310 nm 1550nm -40 ~ 75
MFB-TFB40 100 WDM(LC) Single Mode 40km 1550nm 1550nm -40 ~ 75
Connector
Interface
Fiber Mode Distance Wavelength (TX) Wavelength(RX) Operating Temp.
O
C
O
C
O
C
O
C
O
C
O
C
O
C
O
C
O
C
O
C
O
C
Gigabit Ethernet Transceiver (1000Base-X SFP)
Model Speed (Mbps)
MGB-GT 1000 Copper -- 100m -- 0 ~ 60OC
MGB-SX 1000 LC Multi Mode 550m 850nm 0 ~ 60
MGB-SX2 1000 LC Multi Mode 2km 1310n m 0 ~ 60
MGB-LX 1000 LC Single Mode 10k m 1310nm 0 ~ 60
MGB-L30 1000 LC Single Mode 30km 1310 nm 0 ~ 60
MGB-L40 1000 LC Single Mode 40km 1550nm 0 ~ 60
MGB-L50 1000 LC Single Mode 50km 1550nm 0 ~ 60
MGB -L70 1000 LC Single Mode 70km 1550nm 0 ~ 60
MGB - L12 0 1000 LC Single Mode 120km 1550nm 0 ~ 60
MG B-TSX 1000 LC Multi Mode 550m 850nm -40 ~ 75
MGB-TLX 1000 LC Single Mode 10 km 1310nm -40 ~ 75
MGB-TL30 1000 LC Single Mode 30km 1310nm -40 ~ 75
MG B-TL50 1000 LC Single Mode 50km 1550nm -40 ~ 75
Connector
Interface
Fiber Mode Distance Wavelength (nm) Wavelength
O
C
O
C
O
C
O
C
O
C
O
C
O
C
O
C
O
C
O
C
O
C
O
C
6
Gigabit Ethernet Transceiver (1000Base-BX, Single Fiber Bi-Directional SFP)
IGS-620TF
Model Speed (Mbps)
Connector
Interface
Fiber Mode Distance Wavelength (TX) Wavelength (RX) Op erating Temp.
MG B -L A10 1000 WDM(LC) Single Mode 10km 1310nm 1550nm 0 ~ 60OC
MGB-L B10 1000 WDM(LC) Single Mode 10km 1550nm 1310nm 0 ~ 60
MGB-LA20 1000 WDM(LC) Single Mode 20km 1310nm 1550nm 0 ~ 60
MGB- LB20 1000 WDM(LC) Single Mode 20km 1550nm 1310nm 0 ~ 6 0
MGB-LA40 1000 WDM(LC) Single Mode 40km 1310n m 1550nm 0 ~ 60
MGB-LB40 1000 WDM(LC) Single Mode 40km 1550nm 1310n m 0 ~ 60
MGB-L A60 1000 WDM(LC) Single Mode 60km 1310nm 1550nm 0 ~ 60
MGB-LB60 1000 WDM(LC) Single Mode 60km 1550nm 1310n m 0 ~ 60
MG B -TL A10 1000 WDM(LC) Single Mode 10km 1310n m 1550nm 0 ~ 60
MG B-TLB10 1000 WDM(LC) Single Mode 10 km 1550nm 1310nm -40 ~ 75
MG B-TLA20 1000 WDM(LC) Single Mode 20km 1310nm 1550nm -40 ~ 75
MG B-TLB20 1000 WDM(LC) Single Mode 20km 1550nm 1310nm -40 ~ 75
MGB-TLA40 1000 WDM(LC) Single Mode 40km 1310 nm 1550nm -40 ~ 75
MGB-TLB40 1000 WDM(LC) Single Mode 40km 1550nm 1310n m -40 ~ 75
MG B-TLA6 0 1000 WDM(LC) Single Mode 60km 1310nm 1550nm -40 ~ 75
MG B-TLB6 0 1000 WDM(LC) Single Mode 60km 1550nm 1310n m -40 ~ 75
O
C
O
C
O
C
O
C
O
C
O
C
O
C
O
C
O
C
O
C
O
C
O
C
O
C
O
C
O
C
PLANET Technology Corporation
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City
231, Taiwan (R.O.C.)
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528
Email: sales@planet.com.tw www.planet.com.tw
C-IGS-620TF
PLANET reserves the right to change specications without prior notice. All brand names and trademarks are property of
their respective owners. Copyright © 2013 PLANET Technology Corp. All rights reserved.
7
Loading...