Planet IGS-501T User Manual
IGS-501T
5-Port 10/100/1000T Industrial Gigabit Ethernet Switch with
Wide Operating Temperature
Slim Type with More Practicability and Convenience
The IGS-501T advanced, slim-type, industrial, hardened Gigabit Ethernet
Switch with IP30 metal case consists of 5 10/100/1000Mbps auto negotiation
ports and thus, it operates reliably in heavy industrial demanding environments.
Its compact IP30 standard metal case features either DIN rail or wall mount for
the efcient use of cabinet space.
Stable Performance under Difficult Environments
The IGS-501T provides a high level of immunity against electromagnetic
interference and heavy electrical surges which are usually found on plant
floors or in curb side traffic control cabinets. Being able to operate under the
temperature range from -40 to 75 degrees C coupled with hazardous location
certification (Class 1 Division 2), the IGS-501T can be placed in almost any
difficult environment. The IGS-501T also possesses an integrated power
supply source with a wide range of voltages (12 to 48V DC) for worldwide high
availability applications requiring dual or backup power inputs.
Robust Switch Performance
The IGS-501T offers high performance switch architecture. With the 5
10/100/1000Mbps Gigabit Ethernet ports providing non-blocking switch fabric
and wire-speed throughput as high as 10Gbps and the 2K MAC address table,
the IGS-501T can perform wire-speed packets transfer without risk of packet
loss.
The flow control function enables the IGS-501T to provide fast and reliable
data transfer. The Gigabit port with 9K Jumbo frame supported can handle
extremely large amounts of data transmission in industrial topology that
forward data to central control room.
Key Features
Physical Port
• 5-port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X
function
Layer 2 Features
• Complies with IEEE 802.3 10Base-T, IEEE 802.3u
100Base-TX, IEEE 802.3ab 1000Base-T Ethernet standard
• Supports auto-negotiation and 10/100Mbps half / full duplex
and 1000Mbps full duplex mode
• High performance Store and Forward architecture,
broadcast storm control and runt/CRC ltering eliminate
erroneous packets to optimize the network bandwidth
• Prevents packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame ow control (full-duplex)
• Backplane (switching fabric): 10Gbps
• Integrated address look-up engine, supporting 2K absolute
MAC addresses
• 1M bits on-chip buffer memory
• 9K Jumbo packet size support
• Automatic address learning and address aging
• CSMA/CD Protocol
Industrial Case / Installation
• IP30 metal case
• DIN rail and wall-mount design
• 12 to 48V DC, redundant power with polarity reverse
protect function and connective, removable terminal block
for master and slave power; 24V AC power support
• Supports EFT protection 6000V DC for power line
• Supports 6000V DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
Plug and Play
All of the RJ-45 copper interfaces in the IGS-501T support 10/100/1000Mbps
auto negotiation for optimal speed detection through RJ-45 Category 6, 5
or 5e cables. The standard auto-MDI/MDI-X support can detect the type
of connection to any Ethernet device without requiring special straight or
crossover cables.
Data Sheet
1
1
IGS-501T
Application
Industrial Area Switch for Data Collection and Forwarding
The IGS-501T is equipped with 5 10/100/1000Mbps ports that offer auto MDI / MDIX feature, 10Gbps non-blocking switch fabric and the 2K MAC address
table so that it can perform wire-speed packets transfer without risk of packet loss. The Gigabit ports supporting 9K jumbo packet can handle large amounts
of data transmission in a secure topology linking to a backbone switch or high-power servers. The IGS-501T comes with a slim-type IP 30 metal case that is
ideal for most heavy industrial demanding environments.
10/100/1000Base-T Ethernet
Cat5,6 UTP/STP Cable
Human Management Interface
ROBOT
Robot
Field Automatic
I/O
I/O
Device
I/O Devices
SGSW-24040
IGS-501
IGS-801
PC
Field Automatic
I/O
I/O
Device
Distributed I/O
Control System
IGS-801T
Serial Device
Server
Field Automatic
Device
Data Collect Server
I/O
I/O
Field Automatic
Device
IGS-501T
PC
Distributed I/O
Control System
Specications
Product
Hardware Specications
Hardware Version 3
Copper Ports
Connector
Alarm
LED
100Base-TX UTP
1000Base-T UTP
IGS-501T
5 x 10/100/1000Base-T RJ45 TP
auto-MDI/MDI-X, auto-negotiation
Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Provides one relay output for power failure
Alarm relay current carry ability: 1A @ DC 24V
3 x LED for system and power:
■ Green: DC Power 1
■ Green: DC Power 2
■ Green: Power Fault
2 x LED for each copper port
■ Green: 1000Mbps LNK/ACT
■ Orange:10/100Mbps LNK/ACT
2
Loading...