Page 1
CONFIDENTIAL
Filename:
Page 1 of 10
Printed on 2019/11/27
Product Specifications of IGS-1600T
Product Specifications
Industrial 16-Port 10/100/1000T
Ethernet Switch
IGS-1600T
Version 1.0
This document contains confidential proprietary information and is property of PLANET. The contents of this
document should not be disclosed to unauthorized persons without the written consent of PLANET.
Change History:
Revision: Date: Author: Change List
Version 1.0 2019/11/27 Angeline Initial Release
Author:
Reviewed By:
PS-IGS-1600T_v1.0.doc
Angeline Huang
Editor:
Approved By:
Angeline Huang
Kent Kang
Page 2
CONFIDENTIAL
Filename:
Page 2 of 10
Printed on 2019/11/27
Product Specifications of IGS-1600T
1. PRODUCT DESCRIPTION
PLANET IGS-1600T Industrial high-density 16-port 10/100/1000T Gigabit E thern et Sw itch is equipped w ith a ru gge d IP30 metal
case for stable operation in heavy industrial de mand ing env ir onme nts. Thus, the IGS-1600T provides a high level of immunity
against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic
control cabinets.
Industrial-grade, Flexible and Environmentally-hardened Design
The IGS-1600T possesses an integrated power supply source with a wide range of voltages (12 to 48V DC or 24V AC) for
worldwide high availability applications requiring dual or backup power inputs. Being able to operate under wide temperature
range from -40 to 75 degrees C, the IGS-1600T can be placed in almost any difficult environment. The IGS-1600T also allows
either DIN rail or wall mounting for efficient use of cabinet space.
Robust Protection
The IGS-1600T provides a contact discharge of ±6KV DC and air discharge of ±6KV DC for Ethernet ESD protection. It also
supports ±6KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making
sure the flow of operation does not fluctuate.
Energy Savings
The IGS-1600T, integrated with advanced green networking technologies and IEEE 802.3az protocol based power savings, is
able to provide power savings of up to 50% but maintain high performance efficiently.
■ Link Down power savings
PS-IGS-1600T_v1.0.doc
Page 3
CONFIDENTIAL
Filename:
Page 3 of 10
Printed on 2019/11/27
Product Specifications of IGS-1600T
The Link Down power savings goes beyond IEEE specifications to automatically lower power consumption for a given port
when it is not linked. With the Link Down power saving technology, the IGS-1600T will automatically adjust power usage of
the ports that are shut down or not connected to network device.
■ Intelligent power scale based on cable length
Intelligent power scale i s an intelli gent algor ithm that actively det ermine s the appro priat e pow er lev el based on cabl e lengt h.
When the IGS-1600T is connected with Ethernet cable shorter than 20m, a device can obtain maximum power savings
because the IGS-1600T would automatically detect the Ethernet cable length and diminish power usage. The connected
device can substantially reduce the overall power consumption, which makes a significant contribution to energy savings.
PS-IGS-1600T_v1.0.doc
Page 4
CONFIDENTIAL
Filename:
Page 4 of 10
Printed on 2019/11/27
Product Specifications of IGS-1600T
2. PRODUCT FEATURES
Physical Port
16-port 10/100/1000BASE-T RJ45 with auto MDI/MDI-X function
Layer 2 Features
Supports auto-negotiation and 10/100/1000Mbps half/full duplex mode
Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
Complies with IEEE 802.3az Energy Efficient Ethernet (EEE)
IEEE 802.1p CoS
Supports 8K MAC address
Automatic address learning and address aging
Industrial Case and Installation
IP30 metal case
DIN-rail and wall-mount designs
12 to 48V DC, redundant power with reverse polarity protection
24V AC power input
Supports 6000 VDC Ethernet ESD protection
-40 to 75 degrees C operating temperature
Free fall, shock-proof and vibration-proof for industries
PS-IGS-1600T_v1.0.doc
Page 5
CONFIDENTIAL
Filename:
Page 5 of 10
Printed on 2019/11/27
Product Specifications of IGS-1600T
Copper
3. PRODUCT SPECIFICATIONS
3.1 MAIN COMPONENTS
Switch ASIC: RTL8382MI x 1
EEPROM:
LED Controller:
AT24C16C
IP403
x 1
x 1
3.2 FUNCTION SPECIFICATIONS
Product IGS-1600T
Hardware Specifications
Gigabit Ethernet Switch
Ports
Switch Architecture Store-and-Forward
Switch Fabric 32Gbps (non-blocking)
Throughput (packet per
second)
Address Table 8K entries, automatic source address learning and aging
Shared Data Buffer 4.1Mbits
Flow Control
16 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
23.81Mpps@ 64 bytes
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame 10Kbytes
ESD Protection 6KV DC
Enclosure IP30 metal case
Installation DIN-rail kit and wall-mount kit
Removable 6-pin terminal block for power input
Connector
Alarm
Dimensions (W x D x H) 66 x 107 x 152 mm
Weight 743g
Power Requirements
- Pin 1/2 for Power 1
- Pin 3/4 for fault alarm
- Pin 5/6 for Power 2
One relay output for power failure.
Alarm relay current carry ability: 1A @ 24V DC
Dual 12~48V DC
24V AC
DC input:
Power Consumption
PS-IGS-1600T_v1.0.doc
Max. 3.4 watts/11.6BTU (System on)
Max. 8.7 watts/29.7BTU (Full loading)
Page 6
CONFIDENTIAL
Filename:
Page 6 of 10
Printed on 2019/11/27
Product Specifications of IGS-1600T
AC input:
Max. 5 watts/17BTU (System on)
Max. 13.99 watts/47.8BTU (Full loading)
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
IEC60068-2-32 (free fall)
Stability Testing
Standards Compliance
Environment
Operating Temperature -40 ~ 75 degrees C
Storage Temperature -40 ~ 85 degrees C
Humidity 5 ~ 95% (non-condensing)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3x flow control and back pressure
IEEE 802.1p Class of Service
IEEE 802.3az Energy Efficient Ethernet (EEE)
PS-IGS-1600T_v1.0.doc
Page 7
CONFIDENTIAL
Filename:
Page 7 of 10
Printed on 2019/11/27
Product Specifications of IGS-1600T
3.3 PHYSICAL SPECIFICATIONS:
■ Dimensions:
66 x 107x 152 mm (W x D x H)
■ Weight:
743g
■ Diagram
PS-IGS-1600T_v1.0.doc
Page 8
CONFIDENTIAL
Filename:
Page 8 of 10
Printed on 2019/11/27
Product Specifications of IGS-1600T
LED
Color
Function
■ Front Panel:
■ LED Definition
System
P1 Green
P2 Green
Fault Red
Per 10/100/1000BASE-T Port
LED Color Function
1000
LNK/ACT
10/100
LNK/ACT
Green
Amber
Lights to indicate DC power input 1 has power.
Lights to indicate DC power input 2 has power.
Lights to indicate that AC or DC power has failed.
Lights:
Blinks:
Lights:
Blinks:
To indicate the link through that port is successfully established at 1000Mbps.
To indicate that the switch is actively sending or receiving data over that port.
To indicate the port is successfully established at 10/100Mbps.
To indicate that the Switch is actively sending or receiving data over that port.
PS-IGS-1600T_v1.0.doc
Page 9
CONFIDENTIAL
Filename:
Page 9 of 10
Printed on 2019/11/27
Product Specifications of IGS-1600T
INPUT
■ Top View
3.4 ENVIRONMENTAL SPECIFICATIONS
Operating:
Temperature: -40°C ~ 75 degrees C
Relative Humidity: 5% ~ 95% (non-condensing)
Storage:
Temperature: -40°C ~ 85 degrees C
Relative Humidity: 5% ~ 95% (non-condensing)
3.5 ELECTRIC AL SPECIF I C ATION
LOADING
DC 12V 2.64 watts/9BTU
DC 24V 2.64 watts/9BTU
DC 48V 3.4 watts/11.6BTU
AC 24V 5 watts/17BTU 13.99 watts/47.8BTU
System on without any devices
attached
Port-1~Port-16 Link Up with Full Loading
8.28 watts/28.3BTU
8.16 watts/27.9BTU
8.7 watts/29.7BTU
3.6 REGULATORY COMPLIANCE
FCC Part 15 Class A, CE
Stability Testing:
• IEC60068-2-32 (Free Fal l)
• IEC60068-2-27 (Shock)
• IEC60068-2-6 (Vibration)
PS-IGS-1600T_v1.0.doc
Page 10
CONFIDENTIAL
Filename:
Page 10 of 10
Printed on 2019/11/27
Product Specifications of IGS-1600T
3.7 RELIABILITY
MTBF > 100,000Hrs @ 25 degrees C
3.8 BASIC PACKAGING
The IGS-1600T x 1
User’s Manual x 1
DIN-rail Kit x 1
Wall Mounting Kit x 1
RJ45 Dust Cap x 16
3.9 PACKING INFORMATION
Box Dimensions (W x D x H) 300 x 170 x 90 mm
Weight 1.01 kg
Carton Dimensions (W x D x H) 385 x 340 x 490 mm
Carton Weight 10.9 kg
Quantity 10pcs in one carton
PS-IGS-1600T_v1.0.doc
Loading...