PLANET ICA-HM126 User Manual

PLANET Technology Corporation

11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C. Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 Email: support@planet.com.tw www.planet.com.tw

VERIFY THE CONTENTS INSIDE PACKAGE BOX

The package should contain the items plus ICA-HM126 / ICA-HM126R. If any item is missing or damaged, please contact the seller immediately.

ICA-HM126 ICA-HM126R

Quick Installation Guid e

CD- ROM

Power Ada pter Focus Adjuste rLens

Camera Rear Panel

1. Video Out Connector

2. DI / DO Connector

3. Reset Button

4. Power Connector

Item Description

1. Video Out Connector The internet camera also provides composite video output. User c an use BNC video cable to connect the

internet camera with a TV monitor or VCR.

2. DI / DO Connector Connect connects to external sensor in and alarm out devices.

Pin Function

1 Output +

2 Output -

3 Input +

4 Input -

5. Auto Iris Connector

6. Line In / Line Out

7. Mirco SD Card slot

8. RJ-45 LAN Socket

3. Reset Button Restore to default setting, press the button with a proper tool.

4. Power Connector The input power is 12V DC.

5. Auto Iris Connector The connector can drive CCTV auto iris lens.

6. Line In / Line Out Connect a microphone / speaker to the network camera.

7. Micro-SD Card slot For video and snapshots storage.

8. RJ- 45 LAN Socket The LAN socket is a RJ -45 connector for connections to 10/100Base-TX Fast Ethernet cabling. The LAN socket

Note: ONLY use package power adapter supplied with the product. Otherwise, the product may be damaged.

is compliant with IEEE802.3af standard PoE and IP Camera is necessary supplied power through PoE Switch/Hub devic e.

PLANET Technology Corporation

11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C. Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 Email: support@planet.com.tw www.planet.com.tw

Step 1. Connecting Lens

Step 2a : Connecting Network

ICA-HM126 ICA-HM126R

Fasten the Lens with IP Camera

User PC

(192.168.0.X)

NOTE : Use only the power adapter shipped with the unit to ensure correct functionality

Ethernet Switch

ICA-HM126/HM126R

Step 2b : Connecting Power via PoE interface and Network

In the ICA-HM126 / ICA- HM126R can be configured without external power, if connecting to an IEEE powered Ethernet switch.

User PC

(192.168.0.X)

Ethernet PoE Switch

ICA-HM126/HM126R

Step 3 : Computer Network Setup

Set your computer’s IP address to 192.168.0.x, where x is a number between 1 to 253 (except 20 where is being used for the camera by default). If you don’t know how to do this, please ask your network administrator.

Step 4 : Login Prompt

Use web browser (Internet Explorer 6.0 or above) to connect to 192.168.0.20 (type this address in the address bar of web browser). You’ll be prompted to input user name and password: admin / null (without password).

Further Configuration

For detail configuration, please check user’s manual on the bundled CD. If you have any other questions, please contact the dealer where you purchased this product or you can contact PLANET directly at the following email address: suppor t_ica@planet.com.t w

Quick GuideQuick Guide

2011-AB5400-000