PLANET ICA-E5550V User Manual
VERIFY THE CONTENTS INSIDE THE BOX
Note
The package should contain the following items. If any item is missing
or damaged, please contact the seller immediately.
Camera x 1
Quick Installation Guide x 1
Mounting Screw Kit x 1
Cable Gland x 2
Terminal Block x 1
Screw Torx x 1
Mounting Diagram x 1
Prior Installation Hardware Overview
Step 1: Installation
1. Loosen the three screws securing the dome cover.
To avoid scratches or leaving ngerprints on the dome
cover, it is recommended to retain the plastic covering
the dome cover until the camera is completely installed.
However, the plastic has been removed on the pictures
in this documentation to show clarity of the procedures
being described.
2. Carefully lift to open the dome cover and place it by the side of the
camera.
3. If necessary, insert a memory card with the metallic contacts facing
down into the card slot of the camera.
4. Install Cable Gland with RJ45 cable.
A. Disassemble the cable gland as shown below:
B. Slip the clamping nut through the Ethernet cable. (Ethernet cable
is not included)
C. Wrap around the cable with the sealing insert with claw.
D. Attach the cable gland body to the hole of the camera.
Note
Do not abruptly lift the dome cover; it is attached to the
camera with a spring wire.
ICA-E5550V
(192.168.0.X)
Note
E. Pull the network cable through the hole of the cable gland body
and tighten the clamping nut.
5. Tighten the three screws to attach the dome cover to the camera
body.
6. Remove the plastic covering the dome cover.
Step 2: Connecting Network and PoE
PoE
PoE Ethernet Switch
Note
Laptop
The camera supports IEEE 802.3af and is only powered
from PoE.
Step 3: Running Search Tool to Locate the IP Camera
Download camera search tool: IP Utility, from the Download Center
of our website (http://www.planet.com.tw/en/support/download.php?
model=48712&type=8184#list).
Run IP Utility to start searching for cameras.
After the IP Utility is launched, all cameras found in your local area
network will be displayed.
Step 4: The Dialog Box for Further Conguration
The default account and password are both admin.
Click the IP Camera’s IP address you want to congure.
The IP Camera will be connected via Web browser automatically.
When the device is logged on for the rst time, the browser will
prompt a message; please click “Allow” to install controls.
If IE9 or higher version browser is used, it is suggested
that PLANET camera Web link should be added as a
Note
trusted site.
Appendix A: Default Setting
Default DHCP Client On
Default IP Address
Default Login User Name admin
Default Login Password admin
Search Tools IP Utility
192.168.0.20 – if DHCP Server does not
exist in the network
Appendix B: Extended Software Introduction
PLANET provides the following software to cooperate with ICA-E camera
series. With these software, user is able to manage, analyze, and even
recognize vehicle license plate.
CV7L: http://www.planet.com.tw/en/support/download.
php?model=48724&type=8184#list
CV7L is a freeware of video management to help users
monitor and record images / videos from multiple
cameras simultaneously by using a single PC. It is able
to operate up to 16 channels with advanced features
such as event management and recording, tri-display
monitoring, smart motion detection, PTZ control and
E-map.
CV7-VA: http://www.planet.com.tw/en/support/download.
php?model=48725&type=8184#list
CV7-VA is a payware of video analytics that is designed
to transform your video surveillance network into a
smart detection system. The software provides Enter
Area, People Counting, Missing Object, Line Crossing,
Unattended Object and Tamper functions. Once a
suspicious activity is detected, users can play back to
watch these events and use them as references or evidences if needed.
With these intelligent functions, it can help you enhance your existing
surveillance system while providing you with valuable information for
management.
CV7-LP: http://www.planet.com.tw/en/support/download.
php?model=48726&type=8184#list
CV7-LP is a payware of video analytics that is designed to detect and
recognize vehicle license plates. This software is able to automatically
locate and read license plates appearing in a certain area, and match
this data against the database. It provides efciency in parking and
trafc control, as well as law enforcement. With CV7-LP, you can easily
cross-check if a vehicle that is passing through the parking gate or
parked in the designated space matches its parking permit. Moreover,
law enforcement ofcers can effortlessly identify
suspicious vehicles by matching the license plate with
its database.
If you need further information, please scan the QR
code or contact PLANET directly at the following email
address: support_ica@planet.com.tw.
Further Conguration
For detailed conguration, please check user’s manual on our website.
(http://www.planet.com.tw/en/support/download.
php?model=48712&type=3#list)
The default IP address of camera is 192.168.0.20.
If you have any other question, please contact the dealer where you
purchased this product or you can contact PLANET directly at the
following email address: support_ica@planet.com.tw
Loading...