Cam Viewer Lite is the basic bundle software, provides the general function for your daily
operation. For more powerful functions, you may install the Cam Viewer Pro 30 days trial version
to operate. After 30 days te sting, you can cont act to your local deal er or direct conne ct to PLANET
sales team (
sales@planet.com.tw) for the Cam Viewer Pro.
2. System Requirement
Total FPS* ~600 600~480 480~240 240~120 120~
CPU Intel Core 2
Duo QX6800
RAM 4 GB 2 GB 2 GB 1 GB 1 GB
Chipset of
Motherboard
VGA Card ATI Radeon 9200, nVIDIA GeForce FX-5200, Intel 945/965 or above (ATI
Ethernet 100Base-TX or above, Gigabit LAN recommended
Hard Disk 160 GB or above
O.S. Windows 2000 / XP / 2003
Total FPS: Means all the cameras will spend how many frames when this software works.
Suppose there are 10 cameras, each one will work with 30fps, the total fps should be 300fps.
Intel 946 or 965 chip, Intel Chipset recommended
recommended)
Intel Core 2
Duo E6600
Intel Pentium
D 930
Intel P4 3.0
GHz
Intel P4 2.8
GHz
3. Software Installation
1. Insert the bundled Cam Viewer CD disk into the CD-ROM drive to laun ch the aut orun program.
Once completed, a welcome menu screen will appear. Click the “Cam Viewer Lite” hyperlink,
the below InstallShield Wizard dialog box will appear.
Note: If the welcome screen does not appear, click “Start” at the taskbar. Then, select “Run” and
type “D:\CamViewer Lite\setup.exe”, assume “D” is your CD-ROM drive.
page-2
Cam Viewer Lite
2. Selects the language which you want, Cam Viewer is current including fifteen languages –
Chinese (Simplified), Chinese (Traditional), Danish, English, French (Standard), German,
Greek, Italian, Japanese, Korean, Portuguese (Brazilian), Portuguese (Standard), Russian,
Spani sh and Thai. Please select the language and click ”Next” to continue.
3. The “Welcome to the InstallShield Wizard for Planet Cam Viewer Lite 1.0.0” will display on the
screen, please click “Next”.
page-3
Cam Viewer Lite
4. Please read the license agreement and then check “I accept the terms of the license
agreement” if you are agreed and click “Next” to continue the installation
5. Please key in user name and company name for which you want and click “Next” to continue
installation.
page-4
Cam Viewer Lite
6. Check the option “Complete” – all program features will be installed (Requires the most disk
space) and click “Next” to continue installation.
7. “Ready to Install the Program” will appear to prompt you to start the installation. Please click
“Install” to start.
page-5
Cam Viewer Lite
8. Please click “Yes” to continue.
Note: When Cam Viewer works with MBM5 (Motherboard Monitor 5), Cam Viewer will display
CPU temperature and fan speed. Please click “No” if you don’t need this function and the Cam
Viewer installation will be finished. When you click “Yes”, please refer to below steps to start the
MBM5 installation.
9. The “Welcome to the Motherboard Monitor 5 Setup Wizard” will display on the screen and click
“Next” to continue.
page-6
Cam Viewer Lite
10. Please read the license agreement and then check “I accept the agreement” if you are agreed
and click “Next” to continue installation.
11. Please read the following important information before continuing and click “Next” to continue
installation.
page-7
Cam Viewer Lite
12. Please click “Next” to continue installation.
13. Please click “Next” to install with original settings, or you may click “Browse…” button to assign
a install folder then press “Next” to continue.
page-8
Cam Viewer Lite
14. Please click “Next” to install with original settings, or you may click “Browse…” button to
rename the program’s shortcut of Start Menu then press “Next” to continue.
15. Please select “Replace the icons 10 seconds after MBM5 started” and click “Next” to continue
installation.
16. Please click “Next” to continue installation.
page-9
Cam Viewer Lite
7. According to your motherboard to select correct option and click “Next” to continue. 1
page-10
Cam Viewer Lite
18. When “Ready to Install the Program” will display on the screen and click “Install” to continue.
19. The “Welcome to the Motherboard Monitor Configuration Wizard” will display on the screen,
please click “Next” to continue.
page-11
Cam Viewer Lite
20. The “Motherboard Monitor Configuration Wizard” will display on the screen, please click
“Update” to update data. Before update, please make sure your PC is connected to Internet
already.
21. Wait a moment, after the program update finish, please click “Next” to continue.
page-12
Cam Viewer Lite
22. Please select your motherboard vendor and model name, then click “Next” to continue
23. Please select temperature format and click “Next” to continue.
page-13
Cam Viewer Lite
24. Please click “Finish” to end the motherboard monitor configuration wizard.
25. Please click “Yes” to restart your computer.
page-14
Loading...
+ 34 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.