Planet GT-702S, GT-705A, GT-706A15, GT-706B15 User Manual

Trademarks
Copyright  PLANET Technology Corp. 2005
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technol­ogy Corp. The information in this manual is subject to change without notice. All other trademarks belong to their respective owners.
PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to the quality, per­formance, merchantability, or tness for a particular purpose.
PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for any inaccuracies or omissions that may have occurred.
Information in this User’s Manual is subject to change without notice and does not represent a commitment on the part of PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User’s Manual. PLANET makes no commitment to update or keep current the information in this User’s Manual, and reserves the right to make improvements to this User’s Manual and/or to the products described in this User’s Manual, at any time without notice.
If you nd information in this manual that is incorrect, misleading, or incomplete, we would appreciate your comments and suggestions.
FCC Warning
This equipment has been tested and found to comply with the regulations for a Class A digital device, pur­suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with this user’s guide, may cause harmful interference to radio communica­tions. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
Revision
User's manual for PLANET Gigabit Ethernet Converter
For Models: GT-702, GT-702S, GT-705A, GT-706A15,
GT-706B15
Rev 4.0 (January. 2005)
Part No: 2010-000006-004
Table of Contents
Chapter 1 Overview 1
Chapter 2 Product Features 2
Chapter 3 Model List 3
Chapter 4 Checklist 4
Chapter 5 Product Outlook 5
Chapter 6 Installing The Converter 6
Chapter 7 Duplex Mode Support 7
Chapter 8 Led Indication 8
Chapter 9 Cable Connection Parameter 9
Chapter 10 Product Specification 10
Chapter 11 Power Information 12
This page is intentionally left blank
1
Chapter 1
OVERVIEW
Thank you for purchasing PLANET GT-70X family Gigabit Ethernet Media Converter products. This Gigabit Ethernet Media Converter is used to convert one type media signal to other type equivalent that allows two type segments connect easily, efciently and inexpensively. The Giagbit Ethernet Media Converter introduced here provides one channel media conversion between the 1000Base-T and 1000Base-SX/LX, 1000Base-SX/LX through SFP Mini-GBIC(GT-705A only) or the 1000Base-LX WDM(GT-706A15/ B15 only).
This Gigabit Ethernet Media converter can be used as a standalone unit or as a slide-in module to the 10”/19” media chassis (up to 15 units) for a multi-mode and single-mode Fiber combined networks at a central wiring closet. Please contact with your sales representative for more about the 10”/19” media chassis.
About the Gigabit Ethernet Media Converter
This Gigabit Ethernet Media Converter utilizes a netrwork technology specied by IEEE 802.3ab 1000Base-T and IEEE802.3z 1000Base-SX/LX standards. The Gigabit Ethernet Media Converter is used to converter one type media signal to other type equivalent that allows two type segments connect easily, effciently and inexpensively.
2
Chapter 2
PRODUCT FEATURES
• Comply with IEEE802.3ab 1000Base-T, IEEE802.3z
1000Base-SX/LX Ethernet standard
• Full-duplex supports for TP and fiber port
• Auto-negotiation on 1000Base-T port
• Auto-MDI/MDIX on TP port
• LED indicators for simple diagnostics and management
• Provides DIP switch to disable/ enable auto-negotiation
by-pass function
• 1000Base-SX interface for up to 550 meters (multi-
mode 50/125µm fiber) and 220 meters (multi-mode
62.5 /125µm fiber) on GT-702 and GT-705A
• 1000Base-LX interface for up to 10km (single mode
9/125µm fiber) on GT-702S and GT-705A
• 1000Base-LX WDM interface for up to 15km (single
mode 9/125µm fiber) on GT-706A15/B15
• One SFP (Mini-GBIC) slot supporting either multi-mode
or single mode fiber, flexibility in Gigabit Ethernet fiber-
optic wiring with different Mini-GBIC module installed
(GT-705A only)
• Compact in size, easy installation
• Can be installed on PLANET’s 10 /19 Media Converter
Chassis
Loading...
+ 12 hidden pages