PLANET GT-702 User Manual

Trademarks
Copyright © PLANET Technology Corp. 2007
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. The
information in this manual is subject to change without notice. All other
trademarks belong to their respective owners.
PLANET Technology does not warrant that the hardware will work
properly in all environments and applications, and makes no warranty and
representation, either implied or expressed, with respect to the quality,
performance, merchantability, or fitness for a particular purpose.
PLANET has made every effort to ensure that this User’s Manual is
accurate; PLANET disclaims liability for any inaccuracies or omissions that
may have occurred.
Information in this User’s Manual is subject to change without notice
and does not represent a commitment on the part of PLANET. PLANET
assumes no responsibility for any inaccuracies that may be contained in
this User’s Manual. PLANET makes no commitment to update or keep
current the information in this User’s Manual, and reserves the right to
make improvements to this User’s Manual and/or to the products described
in this User’s Manual, at any time without notice.
If you find information in this manual that is incorrect, misleading, or
incomplete, we would appreciate your comments and suggestions.
FCC Warning
This equipment has been tested and found to comply with the regulations
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with this
user’s guide, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the
interference at his own expense.
equipment is operated in
a commercial
CE Mark Warning
This is a Class A product. In a domestic environment, this product may
cause radio interference, in which case the user may be required to take
adequate measures.
WEEE Warning
o avoid the potential effects on the environment
WEEE a s unsor ted munici pal waste and have t o colle ct such WEEE
separately.
T
and human health as a result of the presen ce of
hazardou s sub stances in electr ical and electronic
equipm ent, end users of el ectrical and el ectronic
equipmen t sho uld understand the meaning of t he
crossed-out wheeled bin symbol. Do not dispose of
Revision
User’s manual for PLANET Gigabit Ethernet Converter
For Models: GT-702, GT-702S, GT-705A, GT-706A15, GT-706B15,
Rev 5.0 (July. 2007)
Part No: 2010-000006-005
GT-706A60, GT-706B60
Table of Contents
Chapter 1 OVERVIEW .................................................1
About the Gigabit Ethernet Media Converter................ 1
Chapter 2 PRODUCT FEATURES ............................... 2
Chapter 3 MODEL LIST................................................3
Chapter 4 CHECKLIST ................................................. 4
Chapter 5 PRODUCT OUTLOOK ................................5
Chapter 6 INSTALLING THE CONVERTER ................7
Chapter 7 DUPLEX MODE SUPPORT ........................ 8
Chapter 8 LED INDICATION ........................................9
Chapter 9 CABLE CONNECTION PARAMETER ....... 10
Chapter 10 PRODUCT SPECIFICATION ................... 11
Chapter 11 POWER INFORMATION ..........................12
Chapter 1 OVERVIEW
Thank you for purchasing PLANET GT-70X family Gigabit Ethernet Media Converter products. This Gigabit Ethernet Media Converter is used to convert one typ e media signal to other type equivalent that allo ws two typ e segment s connect eas ily, effici ent ly and inexpensively. The Giagbit Ethernet Media Converter introduced he re pro vi de s on e ch an ne l me di a co nv er si on bet we en the 1000Base-T and 1000Base-SX/LX,1000Base-SX/LX through SFP Mini-GBIC(GT-705A only) or the 1000Base-LX WDM(GT-706A15/ B15 and GT-706A60/B60 only).
This Gigabit Ethernet Media converter can be used as a standalone unit or as a slide-in module to the 10”/19” media chassis (up to 15 units) for a multi-mode and single-mode Fiber combined networks at a central wiring closet. Please contact with your sales representative for more about the 10”/19” media chassis.
About the Gigabit Ethernet Media Converter
This Gigabit Ethernet Media Converter utilizes a netrwork technology
specied by IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-
SX/LX standards. The Gigabit Ethernet Media Converter is used to converter one type media signal to other type equivalent that allows two type segments connect easily, effciently and inexpensively.
1
Chapter 2 PRODUCT FEATURES
● Comply with IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-
SX/LX Ethernet standard
● Full-duplex supports for TP and fiber port
● Auto-negotiation on 1000Base-T port
● Auto-MDI/MDIX on TP port
● LED indicators for simple diagnostics and management
Provides DIP switch to disable/ enable auto-negotiation by-pass
function
● 1000Base-SX interface for up to 550 meters (multi-mode
50/125µm fiber) and 220 meters (multi-mode 62.5 /125µm fiber)
on GT-702 and GT-705A
● 1000Base-LX interface for up to 10km (single mode 9/125µm
fiber) on GT-702S and GT-705A
1000Base-LX WDM interface for up to 15km (single mode
9/125µm fiber) on GT-706A15/B15
1000Base-LX WDM interface for up to 60km (single mode
9/125µm fiber) on GT-706A60/B60
One SFP (Mini-GBIC) slot supporting either multi-mode or single
mode fiber, flexibility in Gigabit Ethernet fiber-optic wiring with
different Mini-GBIC module installed (GT-705A only)
● Compact in size, easy installation
● Can be installed on PLANET’s 10”/19” Media Converter Chassis
2
Chapter 3 MODEL LIST
Your Gigabit Ethernet Converter comes with one of the following models.
GT-702: 1000Base-T to 1000Base-SX (SC)
GT-702S: 1000Base-T to 1000Base-LX (SC)
GT-705A: 1000Base-T to 1000Base-SX/LX (LC)
GT-706A15: 1000Base-T to 1000Base-LX(WDM)
GT-706B15: 1000Base-T to 1000Base-LX(WDM)
GT-706A60: 1000Base-T to 1000Base-LX(WDM)
GT-706B60: 1000Base-T to 1000Base-LX(WDM)
In the following sections, the term “GT-70X” indicates the product family ab ove, the term “MM” and “SM” represent Multi-Mode and
Single Mode ber-optic mode.
Notice:
Pl ea se no te GT- 70 6A 15/706B 15 an d GT- 70 6A60/70 6B 60 is designed to work together. It means you must connect GT-706A15 to GT-706B15 or GT-70 6A60 to GT-7 06B6 0 from them to wor k normally. If both ends are GT-706A15 or GT-706A60 and GT-706B15
or GT-706B60, they can’t work normally and may damage the ber
connectors.
3
Loading...
+ 13 hidden pages