PLANET GSD-803PD User Manual
1. Package Contents
GSD-803PD
PWR
1000
1 2 3 4 5 6 7 8 PoE PD
LNK ACT
8-Port Gigabit Ethernet Switch
10/100 LNK ACT
5V DC
1357 468
PoE PD
2
ON
OFF
Power
Notice
Note
Note
Check the following contents of your package:
Gigabit Ethernet PoE PD Switch x 1
User's Manual x 1
Rubber Feet x 4
If any of these are missing or damaged, please contact
your dealer immediately; if possible, retain the carton
including the original packing material, and use them
again to repack the product in case there is a need to
return it to us for repair.
3. Switch Front Panel
Figure 3-1 shows the front panel of GSD-803PD.
Figure 3-1: GSD-803PD Front Panel
5. Switch Rear Panel
Figure 5-1 shows the rear panel of GSD-803PD.
Figure 5-1: GSD-803PD Rear Panel
1. The Gigabit Ethernet PoE PD Switch
supports two power systems, DC 5V or
powered from PoE Port # 8 that supports
802.3af PoE 48V DC in-line power.
2. The default package of Gigabit Ethernet
PoE PD Switch does not include DC 5V
power adapter. If you need this DC 5V
power adapter, please contact your local
dealer or distributor for more assistance.
Step 4: Connect your Gigabit Ethernet PoE PD Switch to
network devices.
A. Connect one end of a standard network
cable to the 10/100/1000Mbps RJ-45 ports
on the Back of the Gigabit Ethernet PoE PD
Switch.
B. Connect the other end of the cable to the
network devices such as printer servers,
workstations or routers..
Step 5: Supply power to the Gigabit Ethernet PoE PD
Switch.
A. Connect one end of the RJ-45 UTP cable
from 802.3af PoE PSE devices to the port 8
of Gigabit Ethernet PoE PD Switch.
When the Gigabit Ethernet PoE PD Switch receives
power, the Power LED should remain solid Green.
- 1 -
2. Product Features
Complies with IEEE 802.3 10Base-T, IEEE 802.3u
100Base-TX, IEEE 802.3ab 1000Base-T Ethernet
standard
8-Port 10/100/1000Mbps Gigabit Ethernet Ports
Features Store-and-Forward mode with wire-speed
ltering and forwarding rates
Hardware based 10/100Mbps, half / full duplex and
1000Mbps full duplex mode, ow control and auto-
negotiation
IEEE 802.3x ow control for full duplex operation and
back-pressure for half duplex operation
Integrated address look-up engine, support 8K
absolute MAC addresses
One power on/off button for energy saving
Automatic address learning and address aging
9K Jumbo packet size
Supports Auto MDI/MDI-X function
Support CSMA/CD protocol
1-Port support 802.3af PoE DC 48V in-line power at
Port 8
FCC, CE class A compliant
- 3 -
4. LED Indicators
System
LED Color Function
PWR Green
Per 10/100/1000Base-T RJ-45 Port
LED Color Function
1000
LNK/ACT
10/100
LNK/ACT
Light to indicate that the Switch has
power.
Light to indicate that the Switch
is successfully connecting to
Orange
the network at 1000Mbps.
Blink to indicate that the Switch is
actively sending or receiving
data over that port.
Light to indicate that the Switch
is successfully connecting to
Green
the network at 10/100Mbps.
Blink to indicate that the Switch is
actively sending or receiving
data over that port.
- 5 -
6. Installing the Switch
This part describes how to install your Gigabit Ethernet
PoE PD Switch and make connections to it. Please
read the following topics and follow the procedures as
presented.
This Gigabit Ethernet PoE PD Switch does
not need software configuration.
Desktop Installation
To install the Gigabit Ethernet PoE PD Switch on
desktop, simply follow the following steps:
Step 1: Attach the rubber feet to the recessed areas
on the bottom of the Gigabit Ethernet PoE PD
Switch.
Step 2: Place the Gigabit Ethernet PoE PD Switch on
desktop near an 802.3af PoE PSE device.
Step 3: Keep enough ventilation space between the
Gigabit Ethernet PoE PD Switch and the
surrounding objects.
When choosing a location, please keep
in mind the environmental restrictions
discussed in Chapter 7 -- Product
Specifications.
- 7 -
7. Product Specications
Product GSD-803PD
Hardware Specications
10/100/1000Base-T
Ports
Enclosure Metal
LED Indication
Dimensions
(W x D x H)
Weight 378g
Power
Requirements
Power Consumption
/ Dissipation
Switch Specications
Switch Processing
Scheme
MAC Address Table 8K entries
Flow Control
8 Auto MDI/MDIX ports
System: Power (Green)
Per Port: 1000 LNK/ACT (Orange)
10/100 LNK/ACT (Green)
155 mm x 86 mm x 26 mm
802.3af PoE 48V DC in-line power
DC 5V power adapter (Not
include in standard package)
3.3 watts / 11 BTU
Store-and-Forward
Back pressure for Half Duplex
IEEE 802.3x Pause Frame for Full
Duplex
- 2 -
- 4 -
- 6 -
- 8 -
Switch Fabric 16Gbps / non-blocking
PLANET TECHNOLOGY CORPORATION
e-mail: sales@planet.com.tw http://www.planet.com.tw
10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:886-2-2219-9518 Fax:886-2-2219-9528
EC Declaration of Conformity
For the following equipment:
*Type of Product : 8-Port 10/100/1000Base-T PoE PD Switch
*Model Number :
GSD-803PD
* Produced by:
Manufacturer‘s Name : PLANET Technology Corp.
Manufacturer‘s Address: 10F., No.96, Minquan Rd., Xindian Dist.,
New Taipei City 231, Taiwan (R.O.C.).
Is here with confirmed to comply with the requirements set out in the Council Directive
on the Approximation of the Laws of the Member States relating to Electromagnetic
Compatibility (2004/108/EC).
For the evaluation regarding the EMC, the following standards were applied:
EN 55022 (Class A : 2006+A1:2007+A2:2010+AC:2011)
EN 55024 (2010)
IEC 61000-4-2 (2008)
IEC 61000-4-3 (2006+A1:2007+A2:2010)
IEC 61000-4-4 (2012)
IEC 61000-4-5 (2005)
IEC 61000-4-6 (2008)
IEC 61000-4-8 (2009)
IEC 61000-4-11 (2004)
Responsible for marking this declaration if the:
Manufacturer Authorized representative established within the EU
Authorized representative established within the EU (if applicable):
Company Name: Planet Technology Corp.
Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan
(R.O.C.)
Person responsible for making this declaration
Name, Surname Kent Kang
Position / Title : Product Manager
Taiwan
29, July, 2013
Place Date Legal Signature
Throughput
(packet per
11.9Mpps@64Bytes
second)
Cat. 3, 4, 5, 5e, 6 UTP cable
Network Cables
(100 meters, max.)
EIA/TIA-568 100-ohm STP (100
meters, max.)
Standards Conformance
IEEE 802.3 (Ethernet), 10Base-T
IEEE 802.3u (Fast Ethernet),
100Base-TX
Standards
Compliance
IEEE 802.3ab (Gigabit Ethernet),
1000Base-T
IEEE 802.3x (Full-Duplex Flow
Control)
IEEE 802.3af (Power over
Ethernet)
Temperature
Operating: 0 ~ 50 degrees C
Storage: -10 ~ 70 degrees C
Operating: 5% to 95%,
Humidity
Storage: 5% to 95%
(Non-condensing)
Regulation
Compliance
FCC Part 15 Class A, CE
- 9 -
8. Customer Support
Thank you for purchasing PLANET products. You can
browse our online FAQ resource at the PLANET Website
rst to check if it could solve your issue. If you need
more support information, please contact PLANET switch
support team.
PLANET online FAQ:
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address:
support_switch@planet.com.tw
Copyright © PLANET Technology Corp. 2013.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
- 10 -
Loading...