1. Package Content
192.168.0.x
PC / Workstation
with
IE Browser
RJ-45/UTP-Cable
Managed Switch
IP Address:
192.168.0.100
IP Address:
Thank you for purchasing PLANET Layer 2 Web Smart
Switch, GSD-802S / GSD-802PS. Terms of “Web Smart
Switch” means the Switches mentioned titled in the cover
page of this Quick Installation Guide.
Open the box of the Web Smart Switch and carefully
unpack it. The box should contain the following items:
The Web Smart Switch x 1
This Quick Installation Guide x 1
User's Manual CD x 1
Rubber Feet x 4
Two Rack-mounting brackets with attachment screws x 1
Power Cord x 1
If any item is found missing or damaged, please contact
your local reseller for replacement.
2. Requirements
Workstation installed with Ethernet NIC (Network Card)
Workstations of subscribers running Windows XP/2003,
Vista, Windows 7, MAC OS X, Linux, Fedora, Ubuntu or
other platform compatible with TCP/IP protocols.
Ethernet Port connect
Network cables - Use standard network (UTP) cables
with RJ-45 connectors.
Above Workstation installed with WEB Browser and
JAVA runtime environment Plug-in
It is recommended to use Internet Explore 7.0
or above to access the Web Smart Switch.
3. Start Web Management
The Web Smart Switch provides a built-in browser interface.
You can manage it remotely by having a remote host with
Web browser, such as Microsoft Internet Explorer, Mozilla
Firefox, Google Chrome or Apple Safari.
The Web Smart Switch provide remote login interface for
manage; the following equipments are necessary for further
management.
– 1 – – 2 –
Figure 3-1 IP Management diagram
The following shows how to start up the Web Management
of the Web Smart Switch, please note the Web Smart
Switch is congured through an Ethernet connection, please
make sure the manager PC must be set on the same IP
subnet address.
For example, the default IP address of the Web Smart
Switch is 192.168.0.100, then the manager PC should
be set at 192.168.0.x (where x is a number between
1 and 254, except 100), and the default subnet mask is
255.255.255.0.
Login the Web Smart Switch
1. Use Internet Explorer 7.0 or above Web browser, enter IP
address http://192.168.0.100 (the factory-default IP
address) to access the Web interface.
2. When the following dialog box appears, please enter the
default password “admin”. The login screen in Figure
– 3 – – 4 –
3-2 appears.
Default IP Address: 192.168.0.100
Default Password: admin
Figure 3-2 Login screen
3. After entering the password, the main screen appears as
Figure 3-3.
Figure 3-3 Web Main Screen of Web Smart Switch
Now, you can use the Web management interface to
continue the Switch management. Please refer to the user
manual for more.
4. While IP Address be changed or
5. Customer Support
forgotten admin password –
To reset the IP address to the default IP Address
“192.168.0.100” or reset the user name and password
to default value( default user name and password are both
admin). Press the hardware reset button at the front
panel about 10 seconds. After the device is rebooted, you
can login the management WEB interface within the same
subnet of 192.168.0.xx and default user name / password.
Be noted, all the previous setup with disappeared after
factory reset.
Thank you for purchase PLANET products. You can browse
our online FAQ resource at the PLANET Web site rst to
check if it could solve you issue. If you need more support
information, please contact PLANET switch support team.
PLANET online FAQ :
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address :
support_switch@planet.com.tw
Copyright © PLANET Technology Corp. 2011.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All
other trademarks belong to their respective owners.
– 5 – – 6 –