Planet GSD-1603 operation manual

1. Package Contents

xDSL/Cable RouterInternet

Power

Check your package for the following items:

Hardware Features

 Made of metal, desktop size and wall-mount design

 LED indicators for system power, per port Link/Act

 12V DC, 1A external power adapter

 FCC, CE Class B compliant

4. LED Indicators

System

LED Color Function

Lights

PWR Green

Off

Indicates that the Switch is powered ON.

Indicates that the Switch is powered OFF.

6. Installing the Switch

This part describes how to install your GSD-1603 Gigabit Ethernet Switch and make connections to it. Please read the following sections and perform the procedures in the order being presented.

Note: This GSD-1603 Gigabit Ethernet Switch does not

need software conguration.

GSD-1603 x 1

If any of these are missing or damaged, please contact your dealer immediately; if possible, retain the carton including the original packing material, and use them again to repack the product in case there is a need to return it to us for repair.

DC 12V, 1A Power Adapter x 1

User’s Manual x 1

- 1 -

2. Product Features

Physical Port

 16-Port 10/100/1000BASE-T Gigabit Ethernet ports

 Supports auto MDI/MDI-X function

Layer 2 Features

 Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u

100BASE-TX, IEEE 802.3ab 1000BASE-T Ethernet standards

 Features Store-and-Forward mode with wire-speed

ltering and forwarding rates

 Integrated address look-up engine, supporting 8K

absolute MAC addresses

 9K Jumbo packet support

 IEEE 802.1Q VLAN packet transparent support

 IEEE 802.3x ow control for full duplex operation and

backpressure for half duplex operation

 Hardware based 10/100BASE-TX, half/full duplex and

1000BASE-T full duplex mode, ow control and auto- negotiation

 Automatic address learning and address aging

 Supports CSMA/CD protocol

- 3 -

3. Switch Front Panel

Figure 3-1 shows the front panel of the GSD-1603

Figure 3-1: GSD-1603 Front Panel

Per 10/100/1000Mbps Port

LED Color Function

Indicates the link through that

Link/

ACT

Lights

Green

Blinking

port is successfully established at 10/100/1000Mbps.

Indicates the Switch is actively sending or receiving data over that port.

- 5 -

5. Switch Rear Panel

Figure 5-1 shows the rear panel of the GSD-1603

16151413121110

Power Notice

Figure 5-1: GSD-1603 Rear Panel

1. The device is a power-required device, meaning it will not work till it is powered. If your networks should be active all the time, please consider using UPS (Uninterrupted Power Supply) for your device. It will prevent you from network data loss or network downtime.

2. In some areas, installing a surge suppression device may also help to protect your Switch from being damaged by unregulated surge or current to the Switch or the power adapter.

8765432

Desktop Installation

To install the GSD-1603 on desktop, simply follow the following steps:

Step 1: Place the GSD-1603 on the desk near a power

source.

Step 2: Keep some ventilation space between the

GSD-1603 and the surrounding objects.

When choosing a location, please keep in mind the environmental restrictions discussed in

Note

Step 3: Connect your GSD-1603 to network devices.

Step 4: Supply power to the GSD-1603.

12V DC

When the GSD-1603 receives power, the Power LED should remain solid Green.

Chapter 7 under Product Specifications.

A. Connect one end of a standard network cable

to the 10/100/1000BASE-T RJ45 ports on the rear panel of the GSD-1603.

- 7 -

B. Connect the other end of the cable to the

network devices such as printer servers, workstations, routers, etc.

A. Connect one end of the power cable to the

GSD-1603.

B. Connect the 12V DC power adapter to a

standard wall outlet.

RJ45

PC/Laptop

RJ45

12V Power Adapter

- 2 -

- 4 -

- 6 -

- 8 -

Wall-mount Installation

Step 1: Please nd the wall that can mount the GSD-1603.

Step 2: Install two screws on the wall.

Step 3: Hang the GSD-1603 on the screws from the wall.

Step 4: Repeat step 4 of Desktop Installation for power

supply to the GSD-1603.

Before mounting the device to the wall, please check the location of the electrical outlet and

Note

the length of the Ethernet cable.

RJ45 UTP Cable

12V Power Adapter

Throughput (packet per second)

Jumbo Frame 9K

Standards Conformance

Standards Compliance

Regulatory Compliance FCC Part 15 Class B, CE

Environments

Temperature

Humidity

23.8Mpps@64Bytes

IEEE 802.3 (Ethernet) IEEE 802.3u (Fast Ethernet) IEEE 802.3ab (Gigabit Ethernet) IEEE 802.3x (Full-duplex Flow Control)

IEEE 802.3az Energy Efcient

Ethernet (EEE)

Operating: 0~50 degrees C Storage: -10~70 degrees C

Operating: 5% to 95%, Storage: 5% to 95% (non-condensing)

- 9 -

7. Product Specications

Product GSD-1603

Hardware Specications

10/100/1000BASE-T Ports

LED Display

Enclosure Metal

Dimensions (W x D x H)

Weight (g) 538g

Power Requirements (External power adapter)

Power Consumption 10 watts/34 BTU

Switch Specications

Switch Processing Scheme

Address Table 8K

Flow Control

Switch Fabric 32Gbps

16 auto MDI/MDIX ports

One for Power, one for Link/Act per port

155 x 118 x 46 mm

12V DC, 1A

Store-and-Forward

Back pressure half duplex, IEEE

802.3x pause frame full duplex

- 11 -

8. Customer Support

Thank you for purchasing PLANET products. You can browse

our online FAQ resource on PLANET Website rst to check

if it could solve your issue. If you need more support information, please contact PLANET switch support team.

PLANET online FAQ : http://www.planet.com.tw/en/support/faq.php?type=1

Switch support team mail address : support_switch@planet.com.tw

Copyright © PLANET Technology Corp. 2015. Contents are subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners.

- 10 -

- 12 - - 13 - - 14 -