Planet GSD-1020 User Manual

10/100/1000Mbps

Gigabit / Fast Ethernet Switch

GSD-1020

User’s Manual

Trademarks

Copyright  PLANET Technology Corp. 2002.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their
respective owners.

Disclaimer

PLANET Technology does not warrant that the hardware will work properly in all environments and applications,
and makes no warranty and representation, either implied or expressed, with respect to the quality, performance,
merchantability, or fitness for a particular purpose.
PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for any
inaccuracies or omissions that may have occurred.

Information in this User’s Manual is subject to change without notice and does not represent a commitment on the
part of PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User’s
Manual. PLANET makes no commitment to update or keep current the information in this User’s Manual, and
reserves the right to make improvements to this User’s Manual and/or to the products described in this User’s
Manual, at any time without notice.

If you find information in this manual that is incorrect, misleading, or incomplete, we would appreciate your
comments and suggestions.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
Instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the
user may be required to take adequate measures.

Revision

PLANET GIGABIT / FAST ETHERNET SWITCH USER'S MANUAL
FOR MODEL: GSD-1020
REVISION: 1.0
PART NO.: 2010-000010-001

TABLE OF CONTENTS

1. INTRODUCTION ...........................................................................................................................1

1.1 C

HECKLIST

..................................................................................................................................................1

1.2 A

BOUT THE SWITCH

.....................................................................................................................................1

1.3 F

EATURES

..................................................................................................................................................1

2. HARDWARE DESCRIPTION........................................................................................................2

2.1 F

RONT PANEL

.............................................................................................................................................2

2.2 R

EAR PANEL

...............................................................................................................................................3

3. INSTALLATION............................................................................................................................4

3.1 B

EFORE START UP

.......................................................................................................................................4

3.2 C

ONNECTING END NODE, HUB OR SWITCH

.....................................................................................................4

3.3 C

ONNECTING TO NETWORK BACKBONE OR SERVER

......................................................................................5

4. SWITCH OPERATION...................................................................................................................6

5. TROUBLESHOOTING...................................................................................................................7

APPENDIX A NETWORKING CONNECTION..................................................................................8

A.1 S

WITCH‘S

RJ-45 P

IN ASSIGNMENTS

............................................................................................................8

A.2 10/100M

BPS

/ 10/100B

ASE

-TX..................................................................................................................8

A.3 RJ-45

CABLE PIN ASSIGNMENT

....................................................................................................................8

APPENDIX B TECHNICAL SPECIFICATIONS ................................................................................9

- 1 -

1. INTRODUCTION

1.1 Checklist

Check the contents of your package for following parts:



GSD-1020



User's manual



Power cord

If any of these pieces are missing or damaged, please contact your dealer immediately, if possible, retain
the carton including the original packing material, and use them against to repack the product in case there
is a need to return it to us for repair.

1.2 About the Switch

The Ethernet Switch is equipped with unshielded twisted-pair (UTP) cable ports providing dedicated 10 or
100Mbps bandwidth. GSD-1020 supports MDI-X/ MDI convertible on each 10/100 port and 2 Gigabit Switch
port that can be used for uplinking to another switch. The dual speed ports use standard twisted-pair cabling
and are ideal for segmenting networks into small, connected sub-networks. Each 100M port can support up
to 200Mbps of throughput in full-duplex mode. Each 1000M port can support up to 2Gbps in Full-duplex
mode.

In addition, the Switch is also support 2 Ethernet Gigabit ports to uplink to a server or network backbone.
These Gigabit Switches are designed for Plug and Play installation, allows the network administrator to
simply connect the network and power cables and the Switching/bridging functions begin automatically.

The front panel of GSD-1020 provide LEDs for easy recognition of the switch operation status and for
troubleshooting. These LED indicators display the power status for the system and Link/Act, 100, full-duplex
for each10/100M port, Act, 1000/100, full-duplex for each Gigabit port.

1.3 Features

s Complies with the IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet and IEEE802.3ab Gigabit Ethernet

standard

s Features Store-and-Forward mode with wire-speed filtering and forwarding rates
s Full/ Half-Duplex capability on each 10/100Base-TX port, Full Duplex only on each 1000Base-T port
s Automatic source address learning and aging
s Support 8K MAC addresses
s Support total 1Mbit packet buffers with dynamic allocation
s IEEE802.3x compliant full-duplex flow control, half-duplex flow control
s Broadcast storm control, runt and CRC Filtering eliminates erroneous packets to optimize the network

bandwidth

s Support to handle up to 1522 bytes packet
s Internal power supply
s LED indicators for simple diagnostics and management
s Auto MDI/ MDI-X on each port