Planet FSD-504HP User Manual

FSD-504HP
4 10/100TX
802.3at/af PoE Ports
1 10/100TX Uplink Port
Switch/Extend Mode DIP Switch
10/100Mbps LNK/ACT Status
PoE Status
10/100Mbps LNK/ACT Status
System Power
4-Port 10/100Mbps 802.3at/af PoE + 1-Port 10/100Mbps Desktop Switch
RJ45 Interface
• Five 10/100Mbps Fast Ethernet ports
• 4 ports support 51V DC power to PoE powered device
Power over Ethernet
• Complies with IEEE 802.3af/at Power over Ethernet end-
span + mid-span PSE
• Up to 4 IEEE 802.3af/2 IEEE 802.3at devices powered
• Supports PoE power up to 30 watts for each PoE port
Easy Deployment for SOHO and Home Users
PLANET FSD-504HP, a 4-port 10/100Mbps 802.3at/af Power over Ethernet +
home-use PoE application environment by any users as it is compact in size and
simple to install. The FSD-504HP is definitely an ideal solution for SOHO and
home users as it has the following advanced features:
■ 4-port PoE, 60-watt PoE budget
■ One 10/100Mbps uplink port
■ 250m distance w/30W power output at speed of 10Mbps in the Extend Mode.
■ Desktop palm-size design
• 60-watt PoE budget
• Hardware DIP switch for “Standard” and “Extend” mode
selection; the “Extend” mode features 30-watt PoE
transmit distance of 250m at speed of 10Mbps and VLAN
isolation
Auto detects powered device (PD)
• Circuit protection prevents power interference between
ports
• Remote power feeding up to 100m in the standard mode
Centralized Power Distribution for Small Ethernet Networking
The FSD-504HP has a total PoE budget of 60 watts, which is an ideal solution to
meeting the demand for sufficient PoE power for network applications. The four
802.3at/af PoE ports provide PoE power injector function which is able to drive two
IEEE 802.3at compliant powered devices or four IEEE 802.3af compliant powered
devices. The FSD-504HP also provides a simple, cost-effective and non-blocking
wire-speed performance. It comes with a palm-size metal housing, suitable for the
desktop deployment of SOHO or home-use network environment.
Switching
• Hardware based 10/100Mbps auto-negotiation and auto
MDI/MDI-X
• Flow control for full duplex operation and back pressure
for half duplex operation
• 1536bytes packet size support
• Integrates address look-up engine, supporting 1K
absolute MAC addresses
Automatic address learning and address aging
Solid DIP switch to isolate ports to prevent broadcast
storm and defend DHCP spoong
Hardware
Desktop palm size
• LED indicators for PoE ready/activity and LINK/ACT
• One 51V DC power jack
Data Sheet
1
1
FSD-504HP
Standard Extend
Standard Extend
Ideal Solution for Securing SOHO IP Surveillance Infrastructure
Targeting the growing popular IP surveillance applications, the FSD-504HP 802.3at/af PoE Switch is also positioned as a Surveillance Switch for quick and
easy PoE IP camera deployment with power feeding. The FSD-504HP supports both 802.3at and 802.3af PoE standards along with four 10/100BASE-TX
ports featuring up to 30 watts per RJ45 copper interface, and one extra Fast Ethernet TP interface supporting high-speed transmission of surveillance images
and videos.
802.3at/af PoE Power and Ethernet Data Transmit Distance Extension
The built-in solid DIP switch provides “Standard” and “Extend” operation modes. The FSD-504HP operates as a normal IEEE 802.at/af PoE Switch in the
Standard” operation mode. In the “Extend” operation mode, the FSD-504HP operates on a per-port basis at 10Mbps duplex operation but can support 30-
watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the FSD-504HP
provides an additional solution for 802.3at/af PoE distance extension, thus saving the cost of Ethernet cable installation. Its VLAN isolation function isolates
ports so as to prevent broadcast storm and defend DHCP spoong in the “Extend” operation mode.
Default PoE Mode
PoE IP Camera
FSD-504HP
Power
100 meters (328 feet)
PoE
Extend PoE Mode
PoE IP Camera
FSD-504HP
Power
PoE
250 meters (820 feet)
PoE
PoE
100BASE-TX UTP with PoE
10BASE-T UTP with PoE
2
FSD-504HP
Easy Cable Connection
With data switching and power over Ethernet integrated into one unit, the FSD-504HP reduces cabling requirements and eliminates the need for electrical
outlets on the wall, ceiling or any unreachable place. A wire that carries both data and power can lower the installation costs, simplify the installation effort
and eliminate the need for electricians or extension cords. With 4 PoE interfaces, the FSD-504HP is ideal for small businesses and workgroups making the
deployment of the PoE facility including wireless access points, IP-based surveillance camera and IP phones in any places easier, more efcient and more
cost-effective.
802.3at PoE PTZ/
Speed Dome IP Camera
802.3af PoE IP Camera
PoE Extender
100M
100M100M
100M
FSD-504HP
Wireless Access
Power
PoE
Point
100BASE-TX UTP with PoE
Power Line
3
Loading...
+ 4 hidden pages