Planet FSD-2405 User Manual
This page is intentionally left blank
Trademarks
Copyright ©PLANET Technology Corp. 2007.
Content subjects to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other
trademarks belong to their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in
all environments and applications, and makes no warranty and representation,
either implied or expressed, with respect to the quality, performance,
merchantability, or tness for a particular purpose.
PLANET has made every effort to ensure that this User’s Manual is accurate;
PLANET disclaims liability for any inaccuracies or omissions that may have
occurred.
Information in this User’s Manual is subject to change without notice and does
not represent a commitment on the part of PLANET. PLANET assumes no
responsibility for any inaccuracies that may be contained in this User’s Manual.
PLANET makes no commitment to update or keep current the information
in this User’s Manual, and reserves the right to make improvements to this
User’s Manual and/or to the products described in this User’s Manual, at any
time without notice.
If you nd information in this manual that is incorrect, misleading, or
incomplete, we would appreciate your comments and suggestions.
FCC Warning
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the Instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at its own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
WEEE Warning
To avoid the potential effects on the environment and
human health as a result of the presence of hazardous
substances in electrical and electronic equipment,
end users of electrical and electronic equipment
should understand the meaning of the crossed-out
wheeled bin symbol. Do not dispose of WEEE as
unsorted municipal waste and have to collect such
WEEE separately.
Revision
PLANET Fast Ethernet Switch User’s Manual
FOR MODELS: FSD-1605 / FSD-2405
Rev: 1.0(July.2007)
Part No.: EM-FSD1624V1.0 (2081-A31013-000)
1.INTRODUCTION
1.1 Package Contents
Check the contents of your package for following parts:
。 Fast Ethernet Switch x 1
。 User’s manual x 1
。 Power cord x 1
。 Rack ear x 2
。 Rubber feet x 4
If any of these are missing or damaged, please contact your dealer
immediately, if possible, retain the carton including the original packing
material, and use them against to repack the product in case there is a need
to return it to us for repair.
1.2 How to Use This Manual
This Fast Ethernet Switch User Manual is structured as follows:
Chapter 2 Installation
The chapter explains the feature, functionality and the physical installation of
the Fast Ethernet Switch.
Chapter 3 Switch operation
The chapter explains the Fast Ethernet Switch transmit operation.
Chapter 4 Troubleshooting
The chapter explains the troubleshooting of the Fast Ethernet Switch.
Appendix A
This chapter contains cable information of the Fast Ethernet Switch.
In the following section, the term “Fast Ethernet Switch” means the FSD1605 and FSD-2405.
1
1.3 Product Features
。 Complies with IEEE 802.3, 10Base-T, and IEEE 802.3u 100Base-TX
。 16/24-Port 10/100Mbps TX Auto-Negotiation Ethernet Switch
。 Features Store-and-Forward mode with wire-speed filtering and forward-
ing rates
。 IEEE 802.3x flow control for full duplex operation and Backpressure for
half duplex operation
。 Support 8K absolute MAC addresses
。 Supports to handle up to 1552 bytes packet
。 Automatic address learning and address aging
。 Supports Auto MDI/MDI-X function
。 Full/Half-Duplex capability on each TX port
。 LED indicators for simple diagnostics and management
。 Desktop-Si�e and easy installation anywhere Desktop-Size and easy installation anywhere
。 Rack-mountable design Rack-mountable design
。 FCC, CE class A compliant
2
Model FSD-1605 FSD-2405
10/100Base-TX Ports 16 RJ-45 MDI/MDI-X 24 RJ-45 MDI/MDI-X
Dimensions (W x H x D) 280 x 170 x 44 mm
Weight (KG) 1.60 KG
Power Consumption 13.6 watts / 46.4BTUwatts / 46.4BTU / 46.4BTUBTU
Power Requirement 100~240 AC, 50-60 H� AC, 50-60 H�AC, 50-60 H�
Switch Architecture Store-and-ForwardForwardorward
Address Table 8K entries, auto learning/ageing
Shared Data Buffer 1.25Mbits
Switch Fabric 3.2 Gbps 4.8 Gbps
Switch Throughput 2.38 Mpps 3.57 Mpps
Flow Control IEEE 802.3x full duplex operating and ow control
Packet Control Runt & CRC ltering
Standard Conformance
IEEE 802.3 (Ethernet)
Network Standards
Operation Temperature
Storage Temperature
Operation Humidity 10% to 90% (Non-condensing)
IEEE 802.3u (Fast Ethernet)
IEEE 802.3x (Flow control) 802.3x (Flow control)802.3x (Flow control)
0~50ºC
-20~70ºC
Storage Humidity 5% to 90% (Non-condensing)
Regulation Compliance FCC Part 15 Class A, CE
3
Loading...