PLANET FSD-1606 User Manual

1. Package Contents
PC/Laptop
xDSL/Cable Router Internet
Power Adapter
RJ-45
RJ-45
Power
001101010
Power Notice
Note
Note
Note
Check the contents of your package for following parts:
Hardware
Plastic shape and Desktop size, wall mount
designed
LED indicators for system Power, per port Link /
Act
Supports to handle up to 1522bytes packet
External DC 9V, 1A Power Adapter
FCC Class B, CE compliant
2.1 Switch Front Panel
Figure 1-1 shows a front panel of FSD-1606.
1. The device is a power-required device, it means, it will not work till it is powered. If your networks should active all the time, please consider using UPS (Uninterrupted Power Supply) for your device. It will prevent you from network data loss or network downtime.
2. In some area, installing a surge suppression device may also help to protect your Switch from being damaged by unregulated surge or current to the Switch or the power adapter.
Step 4: Supply power to the FSD-1606.
A. Connect one end of the power cable to the
FSD-1606.
B. Connect the 9V DC power adapter to a
standard wall outlet.
When the Switch receives power, the Power LED should remain solid Green.
FSD-1606 x 1
If any of these are missing or damaged, please contact your dealer immediately, if possible, retain the carton including the original packing material, and use them against to repack the product in case there is a need to return it to us for repair.
DC 9V, 1A Power
Adapter x 1
- 1 -
User's Manual x 1
2. Product Features
RJ-45 Interface
16-Port 10/100Mbps Fast Ethernet ports
Comply with IEEE 802.3 10Base-T, IEEE 802.3u
100Base-TX
Switching
Hardware based 10/100Mbps Auto-Negotiation and
Auto MDI/MDI-X
Features Store-and-Forward mode with wire-speed
ltering and forwarding rates
Flow control for Full Duplex operation and back
pressure for Half Duplex operation
Integrates address look-up engine, supporting 4K
absolute MAC addresses
1.625Mb RAM for Packet Buffer
Switch Fabric: 3.2Gbps, Switch Throughput: 2.38Mpps
Automatic address learning and address aging
Comply with CSMA/CD protocol.
Figure 1-1: FSD-1606 Front Panel
- 3 -
2.2 LED Indicators
LED Color Function
PWR Green Lit: Power on.
Lit: indicate the link through that
port is successfully established LNK/ ACT
Green
at 10/100Mbps.
Blink: indicate that the Switch is
actively sending or receiving data over that port.
2.3 Switch Rear Panel
Figure 1-2 shows a rear panel of FSD-1606.
Figure 1-2: FSD-1606 Rear Panel
2.4 Installing the FSD-1606
This part describes how to install your FSD-1606 and make connections to it. Please read the following topics and perform the procedures in the order being presented.
This FSD-1606 does not need software configuration.
- 5 -
Desktop Installation
Step 1: Place the FSD-1606 on desktop near a DC
power source.
Step 2: Keep enough ventilation space between the
FSD-1606 and the surrounding objects.
When choosing a location, please keep in mind the environmental restrictions discussed in Product Specifications.
Step 3: Connect your FSD-1606 to network devices.
A. Connect one end of a standard network
cable to the 10/100 RJ-45 ports on the Back of the FSD-1606.
B. Connect the other end of the cable to the
network devices such as printer servers, workstations or routers…etc.
- 7 -
Wall Mount Installation
Step 1: Please nd the wall that can mount the
FSD-1606.
Step 2: Install two screws on the wall.
Step 3: Hang the FSD-1606 on the screws from the
wall.
Step 4: Repeat step 4 of Desktop Installation for supply
power to the FSD-1606.
Before wall mount installation, please consider the material quality of wall, power socket location and Ethernet cable length.
- 2 -
- 4 -
- 6 -
- 8 -
3.ProductSpecications
4. Customer Support
Model FSD-1606
Hardware Specication
Network Connector 16-Port RJ-45 for 10/100Base-TX
LED Display
Switch Architecture
MAC Address Table
Data Buffer 1.625Mb RAM
Switch Fabric 3.2Gbps
Switch Throughput 2.38Mpps
Maximum Packet Size
Flow Control
Power Requirement DC 9V, 1A Power Adapter
Power Consumption 6.3 Watts / 21BTU
Dimension (W x D x H)
Weight 382g
System: Power x 1 (Green) Per Port: LNK/ACT (Green)
Store and Forward switch architecture
4K MAC address table with Auto learning function
1522Bytes
Back pressure for Half-Duplex. IEEE 802.3x Pause Frame for Full-Duplex
220 x 135 x 35 mm
Thank you for purchase PLANET products. You can browse our online FAQ resource at the PLANET web site
rst to check if it could solve you issue. If you need
more support information, please contact PLANET switch support team.
PLANET online FAQ :
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address :
support_switch@planet.com.tw
Copyright © PLANET Technology Corp. 2012.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners.
- 9 -
Standard Conformance
EMI Safety FCC Class B, CE
Operating environment
Storage environment
Operating Humidity
Storage Humidity
Standard Compliance
0 ~ 50 Degree C
-10 ~ 70 Degree C
5 ~ 95%, Relative Humidity, non-condensing
5 ~ 95%, Relative Humidity, non-condensing
IEEE 802.3 IEEE 802.3u IEEE 802.3x
- 11 -
Ethernet Fast Ethernet Flow Control
- 10 -
- 12 - - 13 - - 14 -
Loading...