Copyright (C) 2008 PLANET Technology Corp. All rights reserved.
The products and programs described in this User’s Manual are licensed products of PLANET
Technology, This User’s Manual contains proprietary informatio n protected by copyright, and thi s
User’s Manual and all accompanying hardware, software, and documentation are copyri ghted.
No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduce d to
any electronic medium or machine-readable form by any means by electronic or mechanical.
Including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, and without the prior express written permission of
PLANET Technology.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in all environments
and applications, and makes no warranty and representation, either implied or expressed, with
respect to the quality, performance, merchantability, or fitness for a particular purpose.
PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims
liability for any inaccuracies or omissions that may have occurred.
Information in this User’s Manual is subject to change without notice and does not represent a
commitment on the part of PLANET. PLANET assumes no responsibility for any inaccuracies
that may be contained in this User’s Manual. PLANET makes no commitment to update or keep
current the information in this User’s Manual, and reserves the right to make improvements to
this User’s Manual and/or to the products described in this User’s Manual, at any time without
notice.
If you find information in this manual that is incorrect, misleading, or incomplete, we would
appreciate your comments and suggestions.
FCC
This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received. Including interference that may cause
undesired operation.
CE
This equipment is in compliance with the requirements of the following regulations: EN 55 022:
CLASS B
WEEE regulation
To avoid the potential effects on the environment and human health as a result of the
presence of hazardous substances in electrical and electronic e quipment, end users
of electrical and electronic equipment should understand the meaning of the
crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal
waste and have to collect such WEEE separately.
Trademarks
The PLANET logo is a trademark of PLANET Technology. This documentation may refer to
numerous hardware and software products by their trade names. In most, if not all cases, these
designations are claimed as trademarks or registered trademarks by their respective compani es.
Revision
User’s Manual for PLANET Drawer KVM Console with 17” LCD
Model: DKVM-1700
Rev: 1.1 (Nov., 2008)
Part No. EM-DKVM1700_v1.1
2
Packing List
The complete package consists of:
One 1U 19” rack mount drawer KVM console
Two rails with front and rear bracket
Two brackets A. (Needed for rack depth 828 ~ 1000 mm)
Two brackets B. (Needed for rack depth 504 ~ 614 mm)
Two brackets C. (Needed for rack depth 504 ~ 614 mm)
One 1.8 m KVM cable. (HDDB-15 / VGA + PS/2 x 2)
One AC to DC power adapter
One user’s manual CD
One quick installation guide
Two keys
Six flat screws. (for rail mount to console body)
Six screws. (for replace long bracket A)
Check to make sure that the unit was not damaged in shipping. If you encounter a
problem, contact your dealer.
Please read this manual thoroughly, and follow the installation and operation
procedures carefully to prevent any damage to the product, and / or any of the
devices that connect to it.
I
Safety Instructions
1. Please disconnect this equipment from AC outlet before cleaning. Don’t use
liquid or sprayed detergent for cleaning. Use moisture sheet or clothe for
cleaning.
2. For pluggable equipment, the socked-outlet shall be installed near the
equipment and shall be easily accessible.
3. Please keep this equipment from humidity.
4. Lay this equipment on a reliable surface when install. A drop or fall could cause
injury.
5. Do not leave this equipment in an environment unconditioned, storage
temperature above 60 0C, it may damage the equipment.
6. The opening on the enclosure is for air convection hence the equipment from
overheating. DO NOT COVER THE OPENING.
7. Make sure the voltage of the power source connect the equipment to the power
outlet.
8. Please keep the power cord such a way that people can not step on it. Do not
place anything over power cord. The power cord must rate for the voltage and
current marked on the product’s electrical ratings label. The voltage and current
rating of the cord should be greater than the voltage and the current rating
marked on the product.
9. All cautions and warning on the equipment should be noted.
10. If the equipment is not in use for long time, disconnect the equipment from mains
to avoid being damaged by transient over-voltage.
11. Never pour any liquid into ventilation openings; this could cause fire or electrical
shock.
12. Never open the equipment. For safety reason, qualified service personnel
should only open the equipment.
13. If one of the following situations arises, get the equipment checked by service
personnel.
The Power Cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment has not worked well or you can not get it work according to
User’s Manual.
The equipment has dropped and damaged.
If the equipment has obvious signs or breakage.
Index of Contents..................................................................................................................................... III
1. General Information................................................................................................................... 1
3.3 Installing the Video Card and Video Driver........................................................................ 19
3.3.1 Configuring the Display Settings .................................................................................19
3.3.2 Connecting the Console................................................................................................21
3.4 Turning on the Console..................................................................................................... 21
3.5 Testing the Console........................................................................................................... 21
III
1. General Information
DKVM-1700 is the drawer KVM with single-rail console design offering industrial
level input solution, which optimizes your space utilization by controlling your
systems in just 1U space on the rack. The separate rail design helps users
install the KVM console more easily. You don’t have to prop the heavy console
during the installation but just lock the rails into the rack and then pull the KVM
console into the rails. With modular design, you can easily integrate different
KVM modules to fit your control system. The DKVM-1700 provides the flexibility
for users to select which KVM module they need for connection.
With the PS/2 KVM Switch module, you can use PS/2 cable either to control
multiple PCs or servers or connect PLANET KVM-800 / KVM-1600 up to 8 tiers.
In this chain, you can control up to 128 PCs or servers with the same console.
The 8/16-port Combo-Free KVM Switch module is also available to fit to most
servers that doesn’t supprot PS/2 interface. With the Combo-Free KVM Switch
module, users can use PS/2 or USB type cables to control multiple PCs or
servers without any concern.
The KVM switch modules are loaded with rich features, such as one local
console port, Daisy chain capability, On Screen Display (OSD) menu, Password
security, Searching PC server name, Hot key control, Push button and
Auto-Scan control, complete keyboard and mouse emulation for simultaneously
PC boot-up processes.
1.1 Feature
Easy to install, single rail design.
Support Sun native resolution
Support 17 various keyboard languages (increasing)
Bright Active TFT display
OSD function for LCD display and KVM switch
Durable keyboard with touchpad
Panel protected by tempered glass
Integration with 4 models of KVM switches
Supports PS/2 and Combo-Free KVM switch module
1
1.2 Benefits
1. Cost effective solution : With our unique design and all the options, you can
easily suffice the demand for your customer at reasonable cost.
2. Time to serve your customer : With the modular KVM, you can easily turn
single port console into 8 / 16 ports console to serve your customer well.
3. Easy to maintain : Once the defective comes from the KVM switch, you can
just swap the KVM switch module without asking your customer to send the
whole console back to you.
4. Save freight cost : Since you have to keep only 4 models of KVM switch
modules and generate new models by yourself, you can ship all the goods by
sea instead of by air. In case, you run out of the KVM switch stock, it is much
cheaper to ship the KVM switch modules by air.
1.3 Advantage
Easy to install:
With the unique separate rail design. One man can install the KVM console
easily. In case you need to maintain the console, you can easily uninstall without
effecting the server above or below.
Modular KVM switches:
The user can use DKVM-1700 as single port console or through some simple
action and few screws to be 8/16 ports KVM switch.
Various keyboard language support:
to fit the demand of each individual countries.
2
1.4 Product Specification
Dimension 470.1 x 447.5 x 44 mm / 18.5 x 17.6 x 1.7 inches
Package Dimension 606 x 551.5 x 230 mm / 23.9 x 21.7 x 9.0 inches
Net Weight 13 Kg / 28.7 lbs
Gross Weight 20.5 Kg / 45.2 lbs
Display Size 17 inches
Panel Type Active Matrix TFT LCD
Resolution Capabilities Maximum Resolution up to 1280 x 1024 (SXGA)
Pixel Pitch Supports 0.264 mm x 0.264 mm
Viewing Angle (CR>10)
Contrast Ratio 450 : 1
Brightness White 250 cd/m2
Back Light Four Lamps for Back Light
Supported Colors 16.7M Colors (8-bit with FRC)
Response Time Rising Time 2 ms, Decay Time 14 ms
Operating System
Multi Platform Support PS/2 and USB
System Cables VGA + PS/2 x 2 or VGA + USB x 1 cable
Keyboard Mouse 106 key PS/2 keyboard with touch pad
Sync 45 ~ 80 KHz
Power Source 100 ~ 240 VAC input
Power Consumption 25W, 19.05W for Panel
Temperature
Humidity 10% ~ 90% RH
Chassis Construction Heavy duty steel materials
Keyboard Language