PLANET CAM-IR138 User Manual

15 meter Infra-Red Camera – CAM-IR138

1. Packet Content

2. Installation

Please x the CAM-IR138 to a suitable location

1.

with the Rack and Screws.

2. Adjust the camera to the correct direction.

3. Connect Video Output connector to your DVR.

Connect a DC 12V power adapter to the Power

4.
Input connector.

1. CAM-IR138

2. Screw kit x 1

3. Rack x 1

4. Quick Installation Guide x 1

– 1 – – 2 –

3. Specication

Product

Before connect power adapter to camera, please
make sure the power output voltage is DC 12V

Note

(max. ±10%). If you can not sure this part, we
will suggest to use a DC 12V Switching power
adapter. It can provide stable power output.

White Balance Automatic (2300K~10500K)

Gamma
Characteristic

0.45

Model CAM-IR138

Camera

Image device Sony 1/3” CCD

Board Lens 3.6mm, F1.2

Lens

Min Illumination 0 lux @ F2.0

Effective Pixels
(H x V)

IR LED 6 Units of 850nm High Efciency IR LED

IR Project
Distance

Video

Horizontal

Resolution

S/N Ratio More than 48 dB

Angle of view H: 71 Degree,

V: 52 Degree

NTSC: 510 x 492, PAL: 500 x 582

15 Meters

420 TV lines

Video Output 1 Vp-p Composite Video / 75 Ohms

Function

Gain Control Automatic

Auto Electronic

Shutter

Synchronous
System

General

Water
Resistance

Power Supply DC 12V, 1A

Operating
Temperature

Dimension
(Φ x L)

NTSC: 1/60s~1/100,000s,
PAL: 1/50s~1/110,000s

Internal, Negative sync

IP-66

-10 ~ 50 Degree C
(14 ~ 122 Degree F)

54 x 80 mm

– 3 – – 4 –