How it Works
Planar
Loading...
XP17W
User Manual
21 pgs1.29 Mb0
User Manual
15 pgs922.5 Kb0

Planar XP17W User Manual

7
Table of Contents
Chapter 1 Introduction......................................................................................................1
Chapter 2 Installation........................................................................................................5
Chapter 3 Operation Instruction.......................................................................................7
Chapter 4 Technical Information...................................................................................11
Chapter 5 Other Information..........................................................................................13
Chapter 6 Troubleshooting..............................................................................................14
Chapter 1 Introduction
Thanks for your purchase of this product. With this product, you can use your computer monitor to watch TV/CATV, VCR, LD, and DVD or play video game. Without turning on your computer, the system set up is very easy and there is no additional requirement for hardware or software. You don't need to learn a complicated set up procedure and you can enjoy your product with just plug and play.
1.1 Important Safety Precautions
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your LCD color TV product, please read the following precautions carefully before using the product.
Read instructions—All operating instructions must be read and understood before the product is operated. Keep this manual in a safe place—These safety and operating instructions must be kept in a safe place for
future reference.
Observe warnings—All warnings on the product and in the instructions must be observed closely. Follow instructions—All operating instructions must be followed. Attachments—Do not use attachments not recommended by the manufacturer. Use of inadequate attachments
can result in accidents.
Power source—This product must operate on a power source specified on the specification label. If you are not
sure of the type of power supply used in your home, consult your dealer or local power company. For units designed to operate on batteries or another power source, refer to the operating instructions.
Power cord protection—The power cords must be routed properly to prevent people from stepping on them or
objects from resting on them. Check the cords at the plugs and product.
1
If the AC adapter is misplaced or needs to be replaced, obtain the same type of adapter. Overloading—Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock. Entering of objects and liquids—Never insert an object into the product through vents or openings. High
voltage flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not spill water or liquid on the product.
Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage
and other dangerous conditions. Request a qualified service person to perform servicing.
Repair—If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a
qualified service person to perform repairs. a. When the power cord or plug is damaged. b. When a liquid was spilled on the product or when objects have fallen into the product. c. When the product has been exposed to rain or water. d. When the product does not operate properly as described in the operating instructions. Do not touch the
controls other than those described in the operating instructions. Improper adjustment of controls not described in the instructions can cause damage, which often requires extensive adjustment work by a
qualified technician. e. When the product has been dropped or damaged. f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that
the product needs servicing.
Replacement parts—In case the product needs replacement parts, make sure that the service person uses
replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.
Safety checks—Upon completion of service or repair work, request the service technician to perform safety
checks to ensure that the product is in proper operating condition.
Polarization—This AC adapter may be equipped with a polarized alternating current line plug (a plug having
one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
For use only with AC adapter, Li-shin LSE9901B1260 or Linearity LAD6019AB5.
1.1.1 FCC Statement Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning
Use only shielded signal cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for comliance could viold your authority to operate the equipment.
1.1.2 Canadian DOC Notice
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B repecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
2
1.2 Important Notices
Please use the product under a normal environment
1. Try to avoid the following circumstances. * Heat or direct sunlight places * Location with huge magnetic field
2. For the unauthorized person, please don't serve this product: otherwise the damage caused by unauthorized servicing is not covered by warranty.
3. Unplug this product from AC outlet and remove batteries from IR control, when this product is left unused for a long time.
* Unstable or vibrational places * Exposure to rain or moisture places
1.3 Product Functions
With the advanced video processing technology, the TV composite VIDEO, S-VIDEO signal can be
displayed on PC monitor.
Double scan conversion (15.75 KHz to 31.5 KHz). With built-in audio loop, the audio signal coming from PC can pass through to PC speakers at any
circumstance.
Full screen, true color display. TV systems: NTSC system. Built-in TV tuner for receiving terrestrial or cable TV. Easy operation - With one button to switch signals coming from composite VIDEO, S-VIDEO,
COMPONENT VIDEO, CABLE/TV or PC.
Automatic channel scan to detect the program channels. On screen display operation with IR remote controller. MTS supported for NTSC system. (Available in North America & Taiwan market.)
1.4 Package Contents
As you unpack the product, please make sure the following items were included. If any of these items are missing, call your local agencies.
▪ Main body x1 ▪ Audio cable x1 ▪ IR control x1 ▪ Power supply x1 ▪ User manual x1 ▪ Power cord x1 ▪ VGA cable x1 ▪ AAA batteries x2
1.5 Pull down the base
When you open the box to take the product out then pull down the base first (See figure 1-1)
1.6 Viewing Angle Adjustment
This product is designed to allow users to have a comfortable viewing angle. The viewing angle can be adjusted from -5°to +25°. (See Figure 1-5).
3
Figure 1-1
Figure 1-5
When you want to close the base and body to 90°, you need to release a button from 25°. (See fig. 1-6)
Warning: Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will result in damaging the Monitor and Monitor stand.
Figure 1-6
1.7 Detaching main body from Its Stand
1. Remove the rear cover from neck (See
Figure 1-7)
2. Unscrew screws of the hinge bracket
3. Remove the stand from main body
Figure 1-7
1.8 Interface for Arm Applications
Before installing to mounting device, please refer to Fig.1-7 The rear of this LCD display has four integrated 4 mm, 0.7 pitches threaded nuts, as well as four 5 mm access holes in the plastic covering as illustrated in Figure 1-8. These specifications meet the VESA Flat Panel Monitor Physical Mounting Interface Standard (paragraphs 2.1 and 2.1.3, version 1, dated 13 November 1997).
Note :Please using Ø 4mm x 8mm (L) screw for this application.
Figure 1-8
4
Loading...
+ 10 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use