Page 1
PXL2240MW
Touch LED LCD Monitor
USER'S GUIDE
www.planar.com
Page 2
Content
Operation Instructions...................................................................................................................................................1
Unpacking Instructions .................................................................................................................................................2
Safety Precautions...........................................................................................................................................................2
Package Overview ...........................................................................................................................................................3
Front View of the Product ............................................................................................................................................4
Rear View of the Product ..............................................................................................................................................5
Quick Installation .............................................................................................................................................................6
Basic Operation and Calibration/Reset Instructions...........................................................................................7
Advanced Operation—OSD Menu............................................................................................................................9
Supporting Timing Modes ........................................................................................................................................12
Technical Information................................................................................................................................................. 13
Wall-Mount Installation Instructions..................................................................................................................... 14
Troubleshooting............................................................................................................................................................ 15
Planar Support ............................................................................................................................................................... 16
Page 3
Operation Instructions
Thank you for purchasing the PXL2240MW multi-touch LED monitor. Please read this guide
thoroughly before installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This
LED Monitor
pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection
against harmful interference to a residential installation. This
uses, and can radiate radio frequency energy. Harmful interference to radio communication may
be the result if it‘s not properly installed and used. However, there is no guarantee that
interference will not occur in a particular installation. If this
serious interference to radio or television reception, resetting may correct it. Moreover, users are
encouraged to reduce interference by doing one or more of the following:
Reorient or relocate the receiving antenna.
Move the
Connect the
the receiver is connected.
Consult your local dealer or a qualified technician.
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized
changes or modifications to this
operate this device.
Note: If necessary, shielded interface cables and AC power cord must be used to meet the
emission level limits.
According to WEEE regulation, this Touch LED LCD Monitor can't be handled as normal trash in Europe when
it is out of usage. Please refer to the recycle information on Planar’s website to handle it.
For more information on how to recycle your product, please visit http://www.planar.com/about/green/
has been tested and found compliant with the limits for a Class B digital device,
generates,
does cause
Touch LED LCD Monitor
Touch LED LCD Monitor
Touch LED LCD Monitor
Touch LED LCD Monitor
Touchscreen LED Monitor
and the receiver further away from each other.
into an outlet on a circuit different from that to which
would void the user‘s authority to
1
Page 4
Unpacking Instructions
Move the Touch LED LCD Monitor out of the package and take off the plastic bag and
Polystyrene Foam.
Pull the base from Parallel versus Panel to Vertical.
Adjust the Panel between 4° leaning forward and 40° leaning backward.
Safety Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s manual to
maximize the life of your unit.
Do:
Turn off the product before cleaning.
Touch screen surface may be cleaned using a soft clean cloth moistened with mild window
glass commercial cleaners or 50/50 mixture of water and isopropyl alcohol.
Use a soft cloth moistened with mild detergent to clean the display housing.
Disconnect the power plug from AC outlet if the product is not going to be used for an
extended period of time.
Don’t:
Do not touch the LED Display screen surface with sharp or hard objects.
Do not use abrasive cleaners, waxes or solvents for your cleaning.
Do not operate the product under the following conditions:
o Extremely hot, cold or humid environment.
o Areas susceptible to excessive dust and dirt.
o Near any appliance generating a strong magnetic field.
o In direct sunlight.
If smoke, abnormal noise or odor emits from your Touch LED LCD Monitor, remove the power
cord immediately and call your service center.
Never remove the rear cover of your Touch LED LCD Monitor. The display unit inside contains
high-voltage parts and may cause electric shock.
Never try to repair your
qualified technician to fix it.
Due to safety concerns, if the VESA mounting kit is purchased separately, please
make sure the mounting kit is UL-listed, and replaceable only by service personnel.
Touch LED LCD Monitor
yourself. Always call your service center or a
2
Page 5
Package Overview
Touchscreen LED Monitor
Power Cord
VGA Signal Cable Audio-in Cable
USB Cable (A to B) HDMI Cable
User’s Guide
3
Page 6
Front View of the Product
① ② ③ ④⑤⑥
①
②
③
④
⑤
⑥
OSD Turn On/ Off
Volume Adjust/ Scroll Down/ Adjust Decrease
Preset Mode/ Scroll UP/ Adjust Increase
Input select/ Confirm Selection
LED Indicator
Power On/ Off
* Hot keys Instructions please see “Using the OSD Menu” on page 7.
4
Page 7
Rear View of the Product
① ② ③ ④ ⑤ ⑥ ⑦
①
②
③
④
⑤
⑥
⑦
Power Input
USB - Type A to B
Headphone Jack
Audio Input
HDMI input (HDMI 19 pin)
DVI Input (DVI 24 pin)
VGA Input (D-Sub 15 pin)
5
Page 8
Quick Installation
Connect either VGA, DVI or HDMI Video Source from the monitor to the computer. Make
1.
sure both monitor and computer are powered OFF.
2. Connect the audio cable from audio output of computer to the audio input of the monitor.
3. Connect the USB cable from the computer to the monitor.
4. Connect power cord to a properly grounded AC outlet, and then to the monitor.
5. Power-ON computer and then POWER-ON the monitor.
6. Set the timing mode on your computer. Recommended resolution and refresh rate is 1920 x
1080 @ 60Hz.
Figure 1:
PC
Audio cable
USB 2.0 cable
Power cable
DVI cable
VGA cable
HDMI cable
(not supplied)
6
Page 9
Basic Operation and Calibration/Reset Instructions
Before using the Touch LED LCD Monitor:
Connect external equipment properly.
Insert the power plug, and the power LED indicator will light orange.
Power On/Off
To turn the Touch LED LCD Monitor on/off:
Press POWER button on the front. The power LED indicator light will be blue when the
Touchscreen LED Monitor is on.
Using the OSD Menu
Use OSD menus to adjust settings by using the menu button on the front of the Touchscreen
LED Monitor.
1
2 Selects between VGA, DVI, HDMI or Auto mode
▼
▲
▼ + ▲ Recalls both Contrast and Brightness (when not in OSD menu)
Displays main menu
Exits from OSD menu
Select the desired item when in OSD menu
When not in OSD menu, directly enters Volume adjust
Select the desired item when in OSD menu
When not in OSD menu, directly enters Preset Mode
OSD Lock Out Function
When Touchscreen LED Monitor is in normal mode, the “OSD Lock Out” function can be enabled.
Option 1: OSD lock – all 4 buttons are locked except the “POWER” button.
Press and hold the 1 button and the ▲ button for 3 seconds to lock the OSD buttons.
The Touch LED LCD Monitor will show an “OSD Locked” message for 3 seconds and the message
will disappear automatically.
Repeat this step to unlock.
7
Page 10
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked.
Press and hold the 1 button and the ▼ button for 3 seconds to lock all 5 buttons.
The Touchscreen LED Monitor will show a “Power Button Locked” message for 3 seconds and the
message will disappear automatically.
Repeat this step to unlock.
PXL2240MW Calibration/Reset Instructions:
The PXL2240MW is available with USB connection. It is Microsoft® Windows® 7, 8 HID (Human
Interface Device) compatible if you use the USB touch screen interface. No additional software
driver is required. Calibration is a simple process and can be invoked by running Tablet PC
Settings from Control Panel and clicking the Calibrate button.
Click the Reset button to reset the touchscreen to the factory calibration settings. To reset the
existing calibration data, click "Reset" in the Tablet PC Settings window.
8
Page 11
Advanced Operation—OSD Menu
You can use the OSD menu to adjust various settings for your Touchscreen LED Monitor.
Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu.
Short Cuts Function from the button(s)
Auto Image Adjust: To auto adjust Horizontal Position, Vertical Position, Phase (Fine
Tune) and Clock (H. Size) of the screen.
Contrast: To adjust the foreground white level of screen image.
▲: increase contrast, ▼: decrease contrast.
Brightness: To adjust the luminance of the video.
▲: increase brightness, ▼: decrease brightness.
ECO Mode: Allows the user to turn the ECO On or Off. Contrast and Brightness
adjustment disabled when ECO is active.
Over Drive: Allows the user to turn the Over Drive On or Off. Improve the quality of the
motion pictures.
9
Page 12
Input Select: When Input Select is pressed, change Input signal to VGA, DVI, HDMI or
Auto.
Audio Adjust: To adjust the audio functions.
Volume: To adjust the volume of speaker output.
Mute: To turn the Mute ON/OFF.
Audio Input: When in HDMI input, select where the audio source comes from Line-In or
HDMI.
Color Adjust: To select the color for improving brightness and color saturation
between Cool, Normal, Warm, User Color and Preset Mode.
Cool: Adds blue to screen image for cooler white.
Normal: Adds red to screen image for warmer white and richer red.
Warm: Adds green to screen image for a darker color.
User Color: Individual adjustments for red (R), green (G), blue (B).
1. Press button 2 to select the desired color.
2. Press ▼ or ▲ button to adjust selected color.
Preset Mode: Provides an optimum display environment depending on the contents
displayed. It contains 5 user-selectable presets.
• Standard is for general windows environment and monitor default setting.
• Game optimized for PC game environment.
• Cinema optimized for movie and video environment.
• Scenery optimized for displaying outdoor scenery images.
• Tex t optimized for text editing and viewing in a word processing environment.
Information: To display the information, regarding the current input signal coming
from the graphic card in your computer.
Note: See your graphic card user guide for more information about changing the
resolution and refresh rate.
Manual Image Adjust: To manually adjust the H. / V. position, Clock, Phase, Sharpness
and Video Mode adjust.
H. / V. Position: To adjust the horizontal and vertical position of the video.
H. Position: ▲: move screen to the right, ▼: move screen to the left.
V. Position: ▲: move screen up, ▼: move screen down.
Clock: To adjust the width of the screen image.
▲: increase the width of screen image, ▼: decrease the width of screen image.
Phase: To adjust the delay time of data and clock.
Press ▲ or ▼ to adjust to your preference.
10
Page 13
Sharpness: To adjust the clarity of a non-Full HD Resolution (1920x1080) signal with ▼
or ▲ button.
Video Mode Adjust: To select the video mode from Full Screen or Aspect Ratio.
Full Screen: To select full-screen size image.
Aspect Ratio: To select input timing image size.
Setup Menu: To set up Language Select, OSD Position, OSD Time Out, OSD
Background and Power Indicator.
Language Select: To allow users to choose from available languages.
OSD Position: Press ▼ or ▲ button to select between horizontal and vertical OSD
Position adjustment.
OSD H. Position: To horizontally adjust the OSD position.
▲: move OSD to the right, ▼: move OSD to the left.
OSD V. Position: To vertically adjust the OSD position.
▲: move OSD up, ▼: move OSD down.
OSD Time Out: To automatically turn off On Screen Display (OSD) after a preset period
of time.
OSD Background: Allows the user to turn the OSD background On or Off.
Power Indicator: Allows the user to turn the LED Indicator On or Off.
Memory Recall: To recall factory settings for Video & Audio controls.
Press button 2 to select the Memory Recall menu option.
11
Page 14
Supporting Timing Modes
STANDARD RESOLUTION
VGA 720 x 400 @ 70Hz
VGA 640 x 480 @ 60Hz
MAC 640 x 480 @ 67Hz
VESA 640 x 480 @ 72Hz
VESA 640 x 480 @ 75Hz
VESA 800 x 600 @ 56Hz
VESA 800 x 600 @ 60Hz
VESA 800 x 600 @ 72Hz
VESA 800 x 600 @ 75Hz
MAC 832 x 624 @ 75Hz
VESA 1024 x 768 @ 60Hz
VESA 1024 x 768 @ 70Hz
VESA 1024 x 768 @ 75Hz
VESA 1280 x 960 @ 60Hz
VESA 1152 x 864 @ 75Hz
MAC 1152 x 870 @ 75Hz
VESA 1280 x 1024 @ 60Hz
VESA 1280 x 1024 @ 75Hz
VESA 1440 x 900 @ 60Hz
CVT 1400 x 1050 @ 60Hz
VESA 1600 x 1200 @ 60Hz
VESA 1680 x 1050 @ 60Hz
VESA 1920 x 1080 @ 60Hz
Note:
1. DVI and HDMI supports 480i, 480p, 576i, 576p, 720p, 1080i, and 1080p.
2. Simultaneously press 1 and 2 keys on monitor panel to switch between similar PC timings.
Similar PC Timing on list below:
• 720 x 400 @ 70Hz / 640 x 400 @ 70Hz • 720 x 480 @ 60Hz / 640 x 480 @ 60Hz
• 1400 x 1050 @ 60Hz / 1680 x 1050 @ 60Hz
Warning: Do not set the graphic card in your computer to exceed these maximum refresh rates.
Doing so may result in permanent damage to your monitor.
12
Page 15
Technical Information
Panel 21.5” TFT (with LED backlight)
Power Management On: 24 Watts (typical), 35 Watts (maximum)
Standby Mode: < 0.5 Watt
Off: < 0.5 Watt
Displayable Resolution Full HD 1920 x 1080 max. Vertical Frequency 60Hz max.
Pixel Dimension 0.24825 x 0.24825 mm
Display Color 16.7M
Tilt 4° (+3/-3) ~ 40° (+3/-3)
Active Display Area 476.64 mm x 268.11 mm
Temperature Operating: 0°C ~ +40°C
Storage: -20°C ~ + 60°C
Compliance FCC-B, CE, UL/cUL
Power Input Voltage AC100-240 V
Amplifier spec. 1W x 2 (typical)
Touchscreen Technology
Touchscreen Interface
Touch Method
Supported O/S
Optical Touch
USB
Finger(s) and stylus input
Microsoft Windows® 7, 8
13
Page 16
Wall-Mount Installation Instructions
Wall Mount Arm not included
Turn the power OFF then disconnect the cables from the TFT
Touchscreen LCD Monitor before performing the procedure
below.
1. Lay the TFT Touchscreen LCD Monitor face down on a soft
surface.
2. Remove the 2 screws holding the stand to the hinge.
3. Remove the stand.
4. Follow instructions included with the Wall Mount Kit.
NOTE
100mmx100mm VESA hole pattern (n=4), M4, pitch =0.7 mm
100mm x 100mm Screw
Mounting Options
14
Page 17
Troubleshooting
No power
Make sure A/C power cord is securely connected to the power adapter and the power supply
is firmly connected to the
Plug another electrical device into the power outlet to verify that the outlet is supplying
proper voltage.
Make sure all signal cables are installed.
Power on but no screen image
Make sure the video cable supplied with the
the video output port on back of the computer. If not, tightly secure it.
Adjust brightness.
Wrong or abnormal colors
If any colors (red, green, blue) are missing, check the video cable to make sure it is securely
connected. Loose or broken pins in the cable connector could cause an improper connection.
Connect the
Burn-In
LED/LCD displays are subject to screen burn in (image retention). It’s not recommended to
have a static image on the LCD/LED for more than 4 hours.
Touchscreen LED Monitor
Touchscreen LED Monitor.
Touchscreen LED Monitor
to another computer.
is tightly secured to
15
Page 18
Planar Support
Cables and Accessories
To find cables and accessories for your Planar monitor, touch screen or other Planar products
visit our online store at www.PlanarOnline.com.
Technical Support
Visit Planar at http://www.planar.com/support for operations manuals, touchscreen drivers,
warranty information and access to Planar's Technical Library for online trouble shooting.
To speak with Planar Customer Support please have your model and serial number available
and dial:
Planar Support
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.
Hours: 24 hours a day, 7 days a week.
Toll or long distance charges may apply.
16
Page 19
2013
2001132404T
020-1221-00A
Loading...