Planar PXL2230MW User Manual

PXL2230MW

LED Touch Monitor

USER'S GUIDE

ww w.planar.com

Content

Operation Instructions ...........................................................................................................1

Unpacking Instructions ..........................................................................................................2

Safety Precautions .................................................................................................................2

Front View of the Product.......................................................................................................3

Rear View of the Product ........................................................................................................4

Quick Installation...................................................................................................................5

Basic Operation and Calibration/Reset Instructions ..................................................................6

Advanced Operation—OSD Menu ..........................................................................................8

Supporting Timing Modes....................................................................................................11

Technical Information ..........................................................................................................12

Wall-Mount Installation Instructions......................................................................................13

Troubleshooting..................................................................................................................14

Planar Support ....................................................................................................................15

Operation Instructions

Thank you for purchasing the PXL2230MW multi-touch LED LCD monitor. Please read this guide
thoroughly before installation.

FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)

This

TFT LED LCD monitor

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper
protection against harmful interference to a residential installation. This

LCD monitor

generates, uses, and can radiate radio frequency energy. Harmful interference to
radio communication may be the result if it‘s not properly installed and used. However, there is
no guarantee that interference will not occur in a particular installation. If this

LED LCD monitor

does cause serious interference to radio or television reception, resetting may
correct it. Moreover, users are encouraged to reduce interference by doing one or more of the
following:

 Reorient or relocate the receiving antenna.
 Move the
 Connect the

TFT Touchscreen LED LCD monitor

TFT Touchscreen LED LCD monitor

that to which the receiver is connected.

 Consult your local dealer or a qualified technician.

FCC Warning:

To assure a continued FCC compliance, a user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized
changes or modifications to this
authority to operate this device.

Note: If necessary, shielded interface cables and AC power cord must be used to meet the
emission level limits.

has been tested and found compliant with the limits for a Class B

TFT Touchscreen LED

TFT Touchscreen

and the receiver further away from each other.

into an outlet on a circuit different from

TFT Touchscreen LED LCD monitor

would void the user‘s

According to WEEE regulation, this Touchscreen LED Monitor can't be handled as normal trash in Europe

when it is out of usage. Please refer to the recycle information on Planar’s website to handle it.For more

information on how to recycle your product, please visit WWW.PLANARSYSTEMS.COM/GREEN

1

Unpacking Instructions



Move the LED LCD monitor out of the package and take off the plastic bag and Polystyrene Foam.



Pull the base from Parallel versus Panel to Vertical.



Adjust the Panel between 0° leaning forward and 20° leaning backward.

Safety Precautions

Follow all warnings, precautions and maintenance as recommended in this user’s manual to
maximize the life of your unit.

Do:

 Turn off the product before cleaning.

 Touch screen surface may be cleaned using a soft clean cloth moistened with mild window

glass commercial cleaners or 50/50 mixture of water and isopropyl alcohol.

 Use a soft cloth moistened with mild detergent to clean the display housing.

 Disconnect the power plug from AC outlet if the product is not going to be used for an

extended period of time.

Don’t:

 Do not touch the LED Display screen surface with sharp or hard objects.

 Do not use abrasive cleaners, waxes or solvents for your cleaning.

 Do not operate the product under the following conditions:

o Extremely hot, cold or humid environment.
o Areas susceptible to excessive dust and dirt.
o Near any appliance generating a strong magnetic fi eld.
o In direct sunlight.

 If smoke, abnormal noise or odor emits from your TFT Touchscreen LED LCD monitor, remove

the power cord immediately and call your service center.

 Never remove the rear cover of your TFT Touchscreen LED LCD monitor. The display unit inside

contains high-voltage parts and may cause electric shock.



Never try to repair your
center or a qualified technician to fix it.

1

TFT Touchscreen LED LCD monitor

yourself. Always call your service

2

Front View of the Product

① ② ③ ④ ⑤ ⑥

①

②

③

④

⑤

⑥

OSD Turn On/ Off

Volume Adjust/ Scroll Down/ Adjust Decrease

Preset Mode/ Scroll UP/ Adjust Increase

Input select/ Confirm Selection

Power On/ Off

LED Indicator

3

Rear View of the Product

⑦

⑧

⑨

⑩

⑪

⑫

⑬

⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬

Power Input

USB – Type A to B

Headphone Jack

Audio Input

HDMI Input(HDMI 19 pin)

DVI Input (DVI 24 pin)

VGA Input (D-Sub 15 pin)

4