Content
Operation Instructions...................................................................................................................................................1
Unpacking Instructions .................................................................................................................................................2
Safety Precautions...........................................................................................................................................................2
Front View of the Product ............................................................................................................................................3
Rear View of the Product ..............................................................................................................................................4
Quick Installation .............................................................................................................................................................5
Basic Operation and Calibration/Reset Instructions...........................................................................................6
Advanced Operation—OSD Menu............................................................................................................................8
Supporting Timing Modes ........................................................................................................................................ 11
Technical Information................................................................................................................................................. 12
Wall-Mount Installation Instructions.....................................................................................................................13
Troubleshooting............................................................................................................................................................ 14
Product Registration and Technical Support..................................................................................................... 15
1
Operation Instructions
Thank you for purchasing the PX2230MW multi-touch LCD monitor. Please read this guide
thoroughly before installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This
TFT LCD Monitor
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper
protection against harmful interference to a residential installation. This
Monitor
generates, uses, and can radiate radio frequency energy. Harmful interference to radio
communication may be the result if it‘s not properly installed and used. However, there is no
guarantee that interference will not occur in a particular installation. If this
Monitor
does cause serious interference to radio or television reception, resetting may correct it.
Moreover, users are encouraged to reduce interference by doing one or more of the following:
Reorient or relocate the receiving antenna.
Move the
Connect the
which the receiver is connected.
Consult your local dealer or a ed technician.
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized
to operate this device.
Note: If necessary, shielded interface cables and AC power cord must be used to meet the
emission level limits.
Important Recycle Instructions:
has been tested and found compliant with the limits for a Class B digital
TFT Touchscreen LCD
TFT Touchscreen LCD
TFT Touchscreen LCD Monitor
TFT Touchscreen LCD Monitor
TFT Touchscreen LCD Monitor
and the receiver further away from each other.
into an outlet on a circuit erent from that to
would void the user‘s authority
Lamp(s) inside this product contain mercury. This product may contain other
electronic waste that can be hazardous if not disposed of properly. Recycle or dispose in
accordance with local, state, or federal Laws. For more information, contact the Electronic
Industries Alliance at WWW.EIAE.ORG
WWW.LAMPRECYCLE.ORG.
According to WEEE regulation, this TFT Touchscreen LCD Monitor can't be handled as normal trash
in Europe when it is out of usage. Please refer to the recycle information on Planar’s website to
handle it.
. For lamp disposal information check
1
Unpacking Instructions
Move the LCD out of the package and take the plastic bag and Polystyrene Foam.
Pull the base from Parallel versus Panel to Vertical.
Adjust the Panel between 0° leaning forward and 20° leaning backward.
Safety Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s manual to
maximize the life of your unit.
Do:
Touch screen surface may be cleaned using a soft clean clothmoistened with mild
window glass commercialcleaners or 50/50 mixture of water and isopropyl alcohol.
Use a soft cloth moistened with mild detergent to clean the display housing.
Disconnect the power plug from AC outlet if the product is not going to be used for
an extended period of time.
Don’t:
Do not touch the LCD Display screen surface with sharp or hard objects.
Do not use abrasive cleaners, waxes or solvents for your cleaning.
Do not operate the product under the following conditions:
o Extremely hot, cold or humid environment.
o Areas susceptible to excessive dust and dirt.
o Near any appliance generating a strong magnetic
o In direct sunlight.
If smoke, abnormal noise
power cord immediately and call your service center.
Never remove the rear cover of your TFT Touchscreen LCD Monitor. The display unit inside
contains high-voltage parts and may cause electric shock.
Never try to repair your
or a technician to
or odor emits from your TFT Touchscreen LCD Monitor, remove the
TFT Touchscreen LCD Monitor
yourself. Always call your service center
2
Front View of the Product
① ② ③ ④
①
②
③
④
⑤
⑥
OSD Turn On/ O
Volume Adjust/ Scroll Down/ Adjust Decrease
Preset Mode/ Scroll UP/ Adjust Increase
Input select/ C Selection
Power On/ O
LED Indicator
⑤⑥
3