Planar PX2210MW User Manual

1

The information contained in this document is subject to change without notice.
This document contains proprietary information that is protected by copyright. All
rights are reserved. No part of this document may be reproduced, translated to
another language or stored in a retrieval system, or transmitted by any means,
electronic, mechanical, photocopying, recording, or otherwise, without prior written
permission. Windows is a registered trademark of Microsoft Inc.
Other brand or product names are trademarks of their respective holders.

2

3

Product registration and technical support

TABLE OF CONTENTS

For your safety------------------------------------------------------ 5

Safety precautions -------------------------------------------6
Special notes on lcd monitors -----------------------------7

Before you operate the monitor --------------------------------7

Features --------------------------------------------------------7
Packing list ------------------------------------------------------7
Installation instructions ------------------------------------- 8
Controls and connectors ------------------------------------9
Adjusting the viewing angle------------------------------- 10

Operating instructions ------------------------------------------- 11

General instructions ----------------------------------------- 11
Front panel control -------------------------------------- 12
How to adjust a setting ----------------------------------- 13
Adjusting the picture ---------------------------------- 14-17
Plug and play ----------------------------------------------- 18

Technical support (FAQ) -------------------------------------- 19

Error message & possible solution ------------------- 20

Appendix -------------------------------------------------------------21

Specifications -------------------------------------------- 21
Factory preset timing table ------------------------------
Connector pin assignment ------------------------------ 23-24

22

---------------25

4

FOR YOUR SAFETY

Before operating the monitor, please read this manual thoroughly. This manual
should be retained for future reference.

FCC Class B Radio Frequency Interference Statement
WARNING: (FOR FCC CERTIFIED MODELS)

NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

NOTICE:

1. The changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate the
equipment.

2. Shielded interface cables and AC power cord, if any, must be used in order to

comply with the emission limits.

3. The manufacturer is not responsible for any radio or TV interference caused

by unauthorized modification to this equipment. It is the responsibilities of
the user to correct such interference.

WARNING:

To prevent fire or shock hazard, do not expose the monitor to rain or moisture.
Dangerously high voltages are present inside the monitor. Do not open the cabinet.
Refer servicing to qualified personnel only.



5

PRECAUTIONS

z Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink,

laundry tub, swimming pool or in a wet basement.

z Do not place the monitor on an unstable cart, stand, or table. If the monitor falls,

it can injure a person and cause serious damage to the appliance. Use only a
cart or stand recommended by the manufacturer or sold with the monitor. If
you mount the monitor on a wall or shelf, use a mounting kit approved by the
manufacturer and follow the kit instructions.

z Slots and openings in the back and bottom of the cabinet are provided for

ventilation. To ensure reliable operation of the monitor and to protect it from
overheating, be sure these openings are not blocked or covered. Do not place
the monitor on a bed, sofa, rug, or similar surface. Do not place the monitor
near or over a radiator or heat register. Do not place the monitor in a bookcase
or cabinet unless proper ventilation is provided.

z The monitor should be operated only from the type of power source indicated

on the label. If you are not sure of the type of power supplied to your home,
consult your dealer or local power company.

z The monitor is equipped with a three-pronged grounded plug, a plug with a

third (grounding) pin. This plug will fit only into a grounded power outlet as a
safety feature. If your outlet does not accommodate the three-wire plug, have
an electrician install the correct outlet, or use an adapter to ground the
appliance safely. Do not defeat the safety purpose of the grounded plug.

z Unplug the unit during a lightening storm or when it will not be used for long

period of time. This will protect the monitor from damage due to power surges.

z Do not overload power strips and extension cords. Overloading can result in

fire or electric shock.

z Never push any object into the slot on the monitor cabinet. It could short

circuit parts causing a fire or electric shock. Never spill liquids on the monitor.

z Do not attempt to service the monitor by yourself; opening or removing covers

can expose you to dangerous voltages and other hazards. Please refer all
servicing to qualified service personnel.

z To ensure satisfactory operation, use the monitor only with UL listed computers

which have appropriate configured receptacles marked between 100 - 240V AC,
Min. 5A.

z The wall socket shall be installed near the equipment and shall be easily

accessible.

Important Recycle Instruction:

Lamp(s) inside this product contain mercury and must be recycled or disposed
of according to local, state or federal laws. For more information, contact the
electronic industries alliance at WWW.EIAE.ORG.
information check WWW.LAMPRECYCLE.ORG.

6

For lamp specific disposal

SPECIAL NOTES ON LCD MONITORS

The following symptoms are normal with LCD monitor and do not indicate a
problem.

NOTES

x Due to the nature of the fluorescent light, the screen may flicker during initial

use. Turn off the Power Switch and then turn it on again to make sure the flicker
disappears.

x You may find slightly uneven brightness on the screen depending on the

desktop pattern you use.

x The LCD screen has effective pixels of 99.99% or more. It may include blemishes

of 0.01% or less such as a missing pixel or a pixel lit all of the time.

x Due to the nature of the LCD screen, an afterimage of the previous screen may

remain after switching the image when the same image has been displayed for
a long time. The monitor will slowly recover from this.

x When the screen becomes black or flashing, or cannot illuminate any more,

contact your dealer or service center to replace parts. Don’t repair the screen by
yourself!

BEFORE YOU OPERATE THE MONITOR

FEATURES

x 21.5"(549mm) TFT Color LCD monitor
x 16:9 Widescreen
x Crisp, Clear Display for Windows
x Recommened Resolutions: 1920X 1080@60Hz
x Ergonomic Design
x Space Saving, Compact Case Design

CHECKING THE CONTENTS OF THE PACKAGE

The product package should include the following items:

1. LCD monitor

2. Base

3. User's Guide

4. Power Cord

5. D-sub Cable

. DVI Cable

6

7. Audio Cable



7

INSTALLATION INSTRUCTIONS

BASE

The monitor is supplied complete with a stand.If you prefer to wall mount the monitor,

please follow the instructions below to remove the stand.Be sure to include the stand

with the monitor if it is necessary to return the unit.

CAUTION



Put the monitor on a stable surface.The monitor may cause injury

Ƶ

or damage if it falls or is dropped.



Ƶ

Do not give a strong impact to the monitor.It may cause damage.

Ƶ

Unplug the monitor before removal or installation to avoid electric

shock or damage.





<Installation>

Put a piece of soft cloth on the able beforehand to

ķ

prevent the monitor from being scratched. Lay the

monitor flat on a table with front face down.
Insert stand iinto the monitor as shown in figure.

ĸ

Install the stand-base to the stand.

Ĺ

<Remove>

Put a piece of soft cl

ķ

prevent the monitor from being scratched.Lay the
monitor flat on a table with front face down.

Press and hold the hooks inside,and pull the stand-

ĸ

base.
Insert thin stick into hole,Pull the stand while push

Ĺ

the stick.

oth on the table beforehand to

8

