PLANAR PT1915MU, PT1910MX User Manual
PT1910MX / PT1911MX /
PT1915MU
Touch Screen LCD Monitors
USER’S GUIDE
www.planar.com
Important Recycle Instructions:
Lamp(s) inside this product contains mercury. This product may contain other
electronic waste that can be hazardous if not disposed of properly. Recycle or dispose in
accordance with local, state, or federal Laws. For more information, contact the Electronic
Industries Alliance at WWW.EIAE.ORG. For lamp specific disposal information check
WWW.LAMPRECYCLE.ORG.
1
Table of Contents
Usage Notice ........................................................................... 3
Precautions........................................................................................3
Introduction ............................................................................. 4
About PT1910MX / PT1911MX / PT1915MU......................................4
Touch Screen for PT1910MX.............................................................5
Touch Screen for PT1910MX.............................................................5
Touch Screen for PT1915MU.............................................................6
Package Overview .............................................................................7
Installation ............................................................................... 8
Product Overview...............................................................................8
Kensington Security Slot ....................................................................9
VESA Mount your monitor................................................................10
Start Your Installation .......................................................................12
User Controls ........................................................................ 15
Front Panel Controls ........................................................................15
How to Use the OSD Menus ............................................................16
On-Screen Display Menus ...............................................................17
Appendix................................................................................ 18
Troubleshooting ...............................................................................18
Warning Signal.................................................................................19
No Signal ......................................................................................19
Going to sleep...............................................................................19
Out of Range ................................................................................19
2
Product Dimensions.........................................................................20
Compatibility Modes.........................................................................21
Touch Screen Driver Installation.......................................................22
3
Usage Notice
Warning
Warning
Precautions
Follow all warnings, precautions and maintenance as recommended
in this user’s manual to maximize the life of your unit.
Do:
Don’t:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- In direct sunlight.
- To prevent the risk of fire or shock hazards, do not
expose this product to rain or moisture.
- Please do not open or disassemble the product as
this may cause electric shock.
Turn off the product before cleaning.
Touch screen surface may be cleaned using a soft clean cloth
moistened with mild window glass commercial cleaners or 50/50
mixture of water and isopropyl alcohol.
Use a soft cloth moistened with mild detergent to clean the display
housing.
Use only high quality and safety approved AC/DC adapter.
Disconnect the power plug from AC outlet if the product is not going
to be used for an extended period of time.
Do not touch the LCD Display screen surface with sharp or hard
objects.
Do not use abrasive cleaners, waxes or solvents for your cleaning.
Do not operate the product under the following conditions:
4
Introduction
About PT1910MX / PT1911MX / PT1915MU
The PT1910MX / PT1911MX / PT1915MU is a 19” flat panel screen
with an active matrix, thin-film transistor (TFT) liquid crystal display
(LCD).
Features include:
Direct Analog signal input
Direct Digital signal input
Active matrix TFT LCD technology
1280x1024 SXGA resolution
19” viewable display area
31.5 ~ 80 kHz horizontal scan
56 ~ 75 Hz high refresh rate
0.294mm x 0.294mm Pixel pitch
Auto adjustment function
Multilingual OSD user controls
VESA DPMS power saving
Kensington security slot
75 mm / 100 mm VESA mount
Removable base for flexible mounting solutions.
PT1910MX - 5-wire resistive touch screen with dual RS-232 Serial/USB
controllers
PT1911MX – Capacitive touch screen with dual RS-232 Serial/USB
controllers
PT1915MU - SAW touch screen with USB controller
Built-in speakers-1W X 2
5
Touch Screen for PT1910MX
5-wire resistive touch screen for finger and stylus input
Surface: Anti-glare treatment
Interface: Dual RS-232 Serial/USB controller
Durability: 35 million touches at a single point
Hardness of surface: 3H Typical
Operating force: 40g~200g when using a silicon rubber tipped pen with a 1
mm diameter minimum and a hardness of 60 degree.
Transmittance: 82%±5%
Driver: Windows® VISTA, XP, 2000, ME, 98, CE, XP Embedded, Linux,
Apple® Mac OS
Touch Screen for PT1910MX
Capacitive touch screen for finger input
Surface: Anti-glare treatment
Interface: Dual RS-232 Serial/USB controller
Durability: 200 million touches at a single point
Hardness of surface: 6H Typical
Operating force: + 15g
Transmittance: 85%±5%
Driver: Windows® VISTA, XP, 2000, ME, 98, CE, XP Embedded, Linux,
Apple® Mac OS
6
Touch Screen for PT1915MU
Surface Acoustic Wave (SAW) touch screen for finger and stylus input
Surface: Anti-glare treatment
Interface: USB controller
Durability: 30 million touches at a single point
Hardness of surface: Mohs’ Hardness rating of 7
Operating force: 80g (min.) when using a soft-tipped stylus with an 8mm
diameter minimum.
Transmittance: 92%±5%
Driver: Windows® VISTA, XP, 2000, 98
7
Package Overview
LCD Display Power Cord VGA Signal Cable
DVI Signal Cable Audio-in Cable RS-232 Cable
(PT1910MX/PT1911MX)
USB Cable - Type A to B Touch Screen Driver
Installation CD-ROM
Landing Strip DC Power Supply
(sold separately)
User’s Guide
Loading...