Planar PT1510MX User Manual 2
PT1510MX
QUICK START GUIDE
PT1510MX
Thank you for choosing Planar’s 15” PT1510MX
resistive touchscreen monitor.
Customer Service:
To view online documentation and frequently
asked questions, or to send an email to our
technical support staff , please visit:
http://www.planar.com/support or call
1-866-PLANAR1 (1-866-752-6271).
To receive advanced notifi cation of product
updates, please register your monitor at
www.planar.com/support.
Planar is one of the world’s most accomplished
providers of fl at-panel displays, with over 20
years’ expertise in fl at-panel innovation. The
company provides the most dependable display
solutions for various applications in industrial,
medical, and commercial markets. Each PT touch
LCD monitor comes standard with our 3-Year
Customer First™ Warranty featuring FREE 2-Day
Advance Replacement.
Monitor Set-up
1. If it is necessary, clean the front surface of
the display by using clean, compressed air
or by using only a clean, dry, soft cloth.
2. Connect the video and power cables.
3. Read the Touch Set-up section prior to
powering up the computer.
Touchscreen Set-up -
Please note: The PT1510MX comes with both
RS-232 and USB connections. If you’re using
the RS-232 connection follow the instructions
below:
1. Be sure that the RS-232 cable is disconnected
from the computer.
2. Power on the computer
3. Load the Touch Screen Driver CD
4. Follow the step-by-step instructions for the
PT1510MX as found in the Touch Screen
Driver Installation Manual located on the CD.
5. Reconnect the RS-232 cable between the
computer and monitor prior to use.
If you’re using the USB connection follow the
instructions below:
1. Be sure that the USB cable is not connected
to the PC.
2. Load the CD-Rom.
3. Follow the step-by-step instructions for the
PT1510MX as found in the Touch Screen
Driver Installation Manual located on the CD.
4. Reconnect the USB cable between the
computer and monitor prior to use.
5. If the touch screen isn’t active, simply reboot
your system.
PLEASE NOTE! Don’t plug in both the RS-232
and USB cables! Doing so may cause a driver
confl ict, making your touch screen inoperable.
Set-up Diagram
1. Power Cord
Warning! Don’t plug in both the RS-232 and USB cables! This will
cause your touch screen not to work due to driver confl ict.
2. VGA Cable
3. Audio-In Cable
4. RS-232 Cable
5. USB Cable
1
4
3
2
Package Overview
Contents -
LCD Display Power Adapter Power Cord
VGA Signal Cable Audio-in Cable USB Cable
5
User’s Guide
User’s Guide
The test results show that this device meets the FCC rules. Refer to the product operation manual for FCC classifi cation found at: http://ww w.planar.
com/support. Those limits are set to protect residential areas from the devices with harmful emission. This device will produce, use and radiate radio frequency energy. In addition, failure to follow the user’s manual to install or use this device might produce harmful interference with radio communication.
Notwithstanding the foregoing, it does not guarantee that this type of harmful interference does not occur in some special installations. The interference
caused by this device to the reception of radio or television signals may be verifi ed by turning it on and off . Any changes or modifi cations to this TFT LCD
would void the user’s authority to operate this device.
Landing Strip Touchscreen Driver
Installation CD-ROM
Importand Recycle Instruction -
LCD Lamp(s) inside this
product contain mercury.
This product may contain other
electronic waste that can be
hazardous if not disposed of
properly. Recycle or dispose in
accordance with local, state, or
federal Laws. For more information,
contact the Electronic Industries
Alliance at WWW.EIAE.ORG. For
lamp specifi c disposal information
check WWW.LAMPRECYCLE.ORG.
020-0488-00A
36.57725G001 Ver. A
Loading...