Planar PQ1710M User Manual

PQ1710M
LCD Monitor

USER’S GUIDE

www.planar.com

Planar Systems, Inc

1195 NW Compton Drive

Beaverton, OR 97006-1992

www.planar.com

Customer Service

Planar provides the following technical support services:

Internet Support

For support available 24/7 visit Planar's Online Technical Support at

www.planar.com/support. Our Online Technical Support is where you'll find

solutions to many common problems, download documentation, view answers to

frequently asked questions (FAQs) and get troubleshooting advice, or email

Planar your support question.

Talk to a Customer Service Representative

To contact Planar's Customer First(TM) Technical Support Service call

1.866.PLANAR.1 (866.752.6271). This service is available 5am - 5pm Pacific Time,

8am - 8pm Eastern Time, Monday through Friday.

Contact Us

24x7 Online Technical Support: http://www.planar.com/support

Email: [e-mail]

Tel: 1-866-PLANAR1 [phone]

Hours: M-F, 5am - 5pm Pacific Time, 8am - 8pm Eastern

2

The information contained in this document is subject to change without notice. This
document contains proprietary information that is protected by copyright. All rights are
reserved. No part of this document may be reproduced, translated to another language or
stored in a retrieval system, or transmitted by any means, electronic, mechanical,
photocopying, recording, or otherwise, without prior written permission. Windows is a
registered trademark of Microsoft Inc. Other brand or product names are trademarks of
their respective holders.

3

4

TABLE OF CONTENTS

FOR YOUR SAFETY

For Your Safety -------------------------------------------------------------------------------------4

GENERAL NOTES

1. Introduction--------------------------------------------------------------------------------------6

1.1 General Information

1.2 Features

1.3 Check List

2. Installation --------------------------------------------------------------------------------------7

2.1 Installing the base

2.2 Installing the monitor

2.3 Self test pattern

2.4 Adjusting picture

3. Operation of the monitor ------------------------------------------------------------------9

3.1 Power on/off switch

3.2 Power LED indicator

3.3 OSD control keys

3.4 Safety mode

3.5 Timing guide

3.6 Plug & Play

3.7 Power management

3.8 Volume adjust

4. Specifications ---------------------------------------------------------------------------------15

5. Simple Troubleshooting -------------------------------------------------------------------16

5

FOR YOUR SAFETY

Before operating the monitor, please read this manual thoroughly. This manual should be
retained for future reference.

FCC Class B Radio Frequency Interference Statement
WARNING: (FOR FCC CERTIFIED MODELS)

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy, and if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.

However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE
RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR
FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC
INDUSTRIES ALLIANCE AT WWW.EIAE.ORG
DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG

. FOR LAMP SPECIFIC

.

NOTICE:

1. The changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

2. Shielded interface cables and AC power cord, if any, must be used in order to comply

with the emission limits.

3. The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modification to this equipment. It is the responsibilities of the user to
correct such interference.

WARNING:

To prevent fire or shock hazard, do not expose the monitor to rain or moisture.
Dangerously high voltages are present inside the monitor. Do not open the
cabinet. Refer servicing to qualified personnel only.

6

PRECAUTIONS

1. Unplug the monitor from the power source when you clean the monitor. Do

not use liquid cleaners or aerosol cleaners. Use a cloth to clean it. If that
doesn’t do, please use LCD screen cleaners.

2. Do not use attachments not recommended as they may cause hazards.

3. Please grasp the plug to unplug the connector from the wall outlet. Do not pull

the power cord to unplug it.

4. Do not place anything on the power cord or step on it

5. Do not place the monitor near water such as bathtub, washbowl, sink, laundry

tub, swimming pool etc.

6. The slots are designed for ventilation they keep the monitor both workable

and protect it from overheating. For the same reason, please do not place the
monitor on a bed, sofa, carpets or other similar surface. Do not place the
monitor near or over a heat source, or place in a enclosed structure/area.

7. Keep the monitor at least 2 inches (5 cm) away from the wall or other goods.

8. This monitor can only use the power source indicated on the label. If you

have questions, please consult your dealer.

9. As a safety measure, this monitor is equipped with a three-wire ground style

plug. If you can not insert the plug into outlet, contact your electrician to install
the correct outlet, or use an adapter to ground the appliance safely. Do not
bypass the safety purpose of the grounding-type plug.

10. Please make sure that the outlet and power cord can support the total

electricity use of the products.

11. Place the monitor in safe place where the cord will not be easily tripped over.

12. Follow all the warnings and instructions illustrated in the manual.

13. Don’t overload the wall outlets and extension cords as this can result in fire or

electric shocks.

14. Do not remove or open the cover to service this monitor yourself. It may

expose you to dangerous voltage or other hazards. Please refer all servicing
to qualified service personnel.

15. Unplug this monitor from the outlet and refer servicing to qualified service

personnel under the following conditions.
A. The power cord is frayed or damaged.
B. The monitor has been dropped or the cabinet has been damaged
C. When the monitor displays a distinct change in performance, this

indicates a need for service.

16. The power cord is the main device to disconnect the power.

17. Unplug the power cord when you do not use the monitor for a long time.

18. Place the monitor in a well ventilated area and protect it from strong light,

overheating and moisture.

19.

This monitor must be stored in a room in between the temperature of –20°C ~

+55°C. Storing outside this range may cause permanent damage.

7