Planar PL1910MW User Manual

Contents

Contents

............................................................................................................1

Preface ................................................................................................................2

Installation ...........................................................................................................4

Unpacking.......................................................................................................................................................................................4

Connecting the LCD Monitor and Base.................................................................................................................................5

Viewing Angle Adjustment .......................................................................................................................................................5

Detaching LCD Monitor from Its Stand.................................................................................................................................5

Interface for Arm Applications.................................................................................................................................................5

Connecting the Display..............................................................................................................................................................5

Connecting the AC Power .........................................................................................................................................................6

Connecting the Audio Cable ....................................................................................................................................................6

Setting Up the LCD Monitor......................................................................................................................................................6

Power Management System.....................................................................................................................................................6

Display Controls ..................................................................................................7

User Controls..................................................................................................................................................................................7

Adjusting the Monitor's Display ..............................................................................................................................................8

Technical Information ........................................................................................11

Specifications..............................................................................................................................................................................11

Standard Timing Table......................................................................................13

Troubleshooting.................................................................................................15

Product Registration and Technical Support.....................................................16

1

Preface

This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has been carefully
checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is
subject to change without notice. This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any me chanical, electronic or other means, in any form, without prior
written permission of the manufacturer.

FCC Statement Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the
instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:

• Reposition or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced monitor technician for help.

Warning

Use only shielded signal cables to connect I/O devices to this equipment. You are cautioned that changes or
modifications not expressly approved by the party responsible for comliance could void your authority to
operate the equipment.

This device complies with part 15 FCC Rules. Operation is subject to the following two conditions (1) This device
may not cause harmful interference. (2) This device must accept any interference received, including
interference that may cause undesired operation.

Canadian DOC Notice

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

2

Important Safety Instructions

Please read the following instructions carefully. This manual should be retained for future use.

1. To clean LCD Monitor screen;

-- Power off LCD Monitor and unplug the AC Cord.

-- Spray a non-solvent cleaning solution onto a rag.

-- Gently clean the screen with dampened rag.

2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water,
moisture or sunlight can severely damage it.

3. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be

performed by an authorized technician.

5. Store LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). Storing the LCD

Monitor outside this range could result in permanent damage.

6. If any of the following occurs, immediately unplug your monitor and call an authorized technician.

* Monitor to PC signal cable is frayed or damaged.
* Liquid spilled into LCD Monitor or the monitor has been exposed to rain.
* LCD Monitor or the case is damaged.

7. Only use the supplied main lead to connect the monitor. For a nominal current up to 6A and a device weight

above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm

Important Recycle Instruction:

2

must be used.

LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED
OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE
INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT
WWW.EIAE.ORG.
WWW.LAMPRECYCLE.ORG.

Contains Mercury, Dispose of Properly

FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK

3

Installation

Unpacking

Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a
stable and clean surface near a wall power outlet. Make sure that LCD Monitor has enough space around it for
sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the
Monitor does not become too hot.
After you unpack the LCD Monitor, make sure that the following items were included in the box:

* LCD Monitor * User's Manual * Base

* Monitor-to-PC VGA Cable * Stereo Jack Audio Cable

* Monitor-to-PC DVI-D Cable * Power Cord

If you find that any of these items is missing or appears damaged, contact your dealer immediately.

4

Connecting the LCD Monitor and Base

When you open the box, place the base and put on the desk first.
Then connect the LCD monitor and base. (See fig. 1-1)

Figure 1-1

o

Viewing Angle Adjustment

The LCD Monitor is designed to allow users to have a comfortable
viewing angle. The viewing angle can be adjusted
from -5°to +20°.(See fig. 1-2)

20

o

5

Figure 1-2

Warning

Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will result in
damaging the Monitor and Monitor stand.

Detaching LCD Monitor from Its Stand

Unscrew screws n from the base support column and pull down o
the hinge to release.

Interface for Arm Applications

Before installing to mounting device, please refer to Fig.1-3.
The rear of this LCD display has four integrated 4 mm, 0.7 pitch
threaded nuts, as well as four 5 mm access holes in the plastic
covering as illustrated in Figure 1-4. These specifications meet the
VESA Flat Panel Monitor Physical Mounting Interface Standard
(paragraphs 2.1 and 2.1.3, version 1, dated 13 November 1997).
Note :Please using M 4mm x 11mm (L) screw for this application.

Connecting the Display

1. Power off your computer.

2. Connect one end of the signal cable to the LCD Monitor’s VGA

port or DVI port. (See Fig 1-5)

3. Connect the other end of the signal cable to the VGA port or DVI

port on your PC.

4. Make sure connections are secure.

5

Figure 1-3

DVI

D-SUB

Figure 1-4

Figure1-5