Planar PL1700, PL1700M User Manual

Contents

Preface

.........................................................................................................................2

Installation

Unpacking ...............................................................................................................................................................................4

Connecting the LCD Monitor and Base........................................................................................................................5

Viewing Angle Adjustment...............................................................................................................................................5

Detaching LCD Monitor from Its Stand........................................................................................................................5

Interface for Arm Applications ........................................................................................................................................5

Connecting the Display......................................................................................................................................................5

Connecting the AC Power.................................................................................................................................................6

Connecting the Audio Cable............................................................................................................................................6

Setting Up the LCD Monitor.............................................................................................................................................6

Power Management System ............................................................................................................................................6

.................................................................................................................4

Display Controls

User Controls..........................................................................................................................................................................7

Adjusting the Monitor's Display .....................................................................................................................................7

Function Description...........................................................................................................................................................8

OSD Lock Out Function...................................................................................................................................................... 9

.......................................................................................................7

Technical Information

Specifications ......................................................................................................................................................................10

Standard Timing Table ....................................................................................................................................................12

.........................................................................................10

Troubleshooting

......................................................................................................14

Preface

This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. Windows is a registered trademark of Microsoft Inc. Other brand or product names are trademarks of their respective holders.

FCC Statement Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reposition or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced monitor technician for help.

Warning

Use only shielded signal cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

This device complies with part 15FCC Rules. Operation is subject to the following two conditions(1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

Canadian DOC Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B repecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

Important Safety Instructions

Please read the following instructions carefully. This manual should be retained for future use.

1. To clean the LCD Monitor screen:

-- Power off the LCD Monitor and unplug the AC Cord.

-- Spray a non-solvent cleaning solution onto a rag.

-- Gently clean the screen with dampened rag.

2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can severely damage it.

3. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be

performed by an authorized technician.

5. Store the LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). Storing the LCD Monitor outside this range could result in permanent damage.

6. If any of the following occurs, immediately unplug your monitor and call an authorized technician. * Monitor to PC signal cable is frayed or damaged. * Liquid spilled into LCD Monitor or the monitor has been exposed to rain. * LCD Monitor or the case is damaged.

7. Only use the supplied main lead to connect the monitor. For a nominal current up to 6A and a device weight above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm

Important Recycle Instruction:

must be used.

Lamp(s) inside this product contain mercury. This product may contain other electronic waste that can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal Laws. For more information, contact the Electronic Industries Alliance at WWW.EIAE.ORG check WWW.LAMPRECYCLE.ORG.

. For lamp specific disposal information

Contains Mercury, Dispose of Properly

Installation

Unpacking

Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a stable and clean surface near a wall power outlet. Make sure that the LCD Monitor has enough space around it for sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the Monitor does not become too hot.

After you unpack the LCD Monitor, make sure that the following items were included in the box:

* LCD Monitor * User's Manual

* Monitor-to-PC VGA Cable * Power Cord

* Stereo Jack Audio Cable *

Register Your Planar Products Today Thank you for choosing Planar. To assure you receive all the benefits of your Planar product and services,

register your Planar product today. Visit our website to register your product at http ://www.planar.com/support/product_registration.html

Cables, Replacement Lamps and Accessories To find cables, replacement lamps and accessories for your Planar projector, LCD monitor, touchscreen or other

Planar products visit our online store at www.PlanarOnline.com or find other stores who carry Planar products at http ://www.planar.com/howtobuy

Base

+ 11 hidden pages