Planar pjt155r User Manual

Contents

Preface

.........................................................................................................................2

Installation

Unpacking ...............................................................................................................................................................................4

Viewing Angle Adjustment...............................................................................................................................................5

Detaching LCD Monitor from Its Stand........................................................................................................................5

Interface for Arm Applications ........................................................................................................................................5

Connecting the Display......................................................................................................................................................5

Connecting the AC Power.................................................................................................................................................6

Connecting the Audio Cable............................................................................................................................................6

Connecting the USB Cable................................................................................................................................................ 6

Setting Up the LCD Monitor.............................................................................................................................................6

Power Management System ............................................................................................................................................6

Display Controls

User Controls..........................................................................................................................................................................7

Adjusting the Monitor's Display .....................................................................................................................................7

Function Description...........................................................................................................................................................8

OSD Lock Out Function...................................................................................................................................................... 9

Technical Information

Specifications ......................................................................................................................................................................10

Standard Timing Table ....................................................................................................................................................12

.................................................................................................................4

.......................................................................................................7

.........................................................................................10

Troubleshooting

Touch Screen Driver Installation

Product Registration and Technical Support

......................................................................................................13

.....................................................................14

..............................................16

Preface

This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. Windows is a registered trademark of Microsoft Inc. Other brand or product names are trademarks of their respective holders.

FCC Statement Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

 Reposition or relocate the receiving antenna.  Increase the separation between the equipment and the receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced monitor technician for help.

Warning

Use only shielded signal cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

This device complies with part 15FCC Rules. Operation is subject to the following two conditions(1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

Canadian DOC Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B repecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

Important Recycle Instructions:

Lamp(s) inside this product contain mercury. This product may contain other electronic waste that can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal Laws. For more information, contact the Electronic Industries Alliance at WWW.EIAE.ORG check WWW.LAMPRECYCLE.ORG.

. For lamp specific disposal information

Contains Mercury, Dispose of Properly

For more information on how to recycle your product, please visit WWW.PLANARSYSTEMS.COM/GREEN.

Important Safety Instructions

Please read the following instructions carefully. This manual should be retained for future use.

1. To clean the LCD Monitor screen:

-- Power off the LCD Monitor and unplug the AC Cord.

-- Spray a non-solvent cleaning solution onto a rag.

-- Gently clean the screen with dampened rag.

2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can

severely damage it.

3. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be

performed by an authorized technician.

5. Store the LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). Storing the LCD

Monitor outside this range could result in permanent damage.

6. If any of the following occurs, immediately unplug your monitor and call an authorized technician.

* Monitor to PC signal cable is frayed or damaged. * Liquid spilled into LCD Monitor or the monitor has been exposed to rain. * LCD Monitor or the case is damaged.

7. Only use the supplied main lead to connect the monitor. For a nominal current up to 6A and a device weight

above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm

must be used.

Installation

Unpacking

Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a stable and clean surface near a wall power outlet. Make sure that the LCD Monitor has enough space around it for sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the Monitor does not become too hot.

After you unpack the LCD Monitor, make sure that the following items were included in the box:

Package Overview

LCD Display Power Cord VGA Signal Cable

USB Cable (A to B) Audio-in Cable

User’s Manual

User’s Guide Touch Screen Driver

Installation CD-ROM

Viewing Angle Adjustment

The LCD Monitor is designed to allow users to have a comfortable viewing angle. The viewing angle can be adjusted from -2°to +90°.(See fig. 1-1)

+90°

-2°

Figure 1-1

Warning

Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will result in damaging the Monitor and Monitor stand.

M 4mmX11mm screw x 4

Detaching LCD Monitor from Its Stand

Unscrew screws  the swivel base support column and pull down the hinge to release.

Interface for Arm Applications

Before installing to mounting device, please refer to Fig.1-2. The rear of this LCD display has four integrated 4 mm, 0.7 pitches

threaded nuts, as well as four 5 mm access holes in the plastic covering as illustrated in Figure 1-3. These specifications meet the VESA Flat Panel Monitor Physical Mounting Interface Standard (paragraphs 2.1 and 2.1.3, version 1, dated 13 November 1997).

Note :Please using M 4mm x 11mm (L) screw for this application.

Connecting the Display

1. Power off your computer.

2. Connect one end of the signal cable to the LCD Monitor’s VGA

port. (See Fig 1-4)

3. Connect the other end of the signal cable to the VGA port on

your PC.

4. Make sure connections are secure.

VGAPort

Figure 1-2

Figure 1-3

Figure 1-4

+ 12 hidden pages