Planar PCT2265 User Manual
PCT2265
Touch LED LCD Monitor
The information contained in this document is subject to change without notice.
This document contains proprietary information that is protected by copyright. All
rights are reserved. No part of this document may be reproduced, translated to another
language or stored in a retrieval system, or transmitted by any means, electronic,
mechanical, photocopying, recording, or otherwise, without prior written permission.
Windows is a registered trademark of Microsoft Inc. Other brand or product names are
trademarks of their respective holders.
1
| TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................................................... 3
PRECAUTIONS ...............................................................................................................4
SPECIAL NOTES ON LCD MONITORS .....................................................................6
BEFORE YOU OPERATE THE MONITOR ........................................................................6
FEATURES ....................................................................................................................... 6
PACKAGE LIST ................................................................................................................7
ADJUSTING THE HEIGHT ............................................................................................ 8
CONTROLS AND CONNECTORS ..............................................................................9
ADJUSTING THE VIEWING ANGLE ..................................................................... 10
OPERATING INSTRUCTIONS .......................................................................................... 11
GENERAL INSTRUCTIONS ....................................................................................... 11
FRONT PANEL CONTROL ....................................................................................... 12
HOW TO ADJUST A SETTING ................................................................................. 13
ADJUSTING THE PICTURE ....................................................................................... 14
PLUG AND PLAY ......................................................................................................... 16
CALIBRATION/RESET INSTRUCTIONS..................................................................17
TECHNICAL SUPPORT (FAQ) ........................................................................................ 18
TECHNICAL SUPPORT (FAQ) .................................................................................. 19
ERROR MESSAGE & POSSIBLE SOLUTION ......................................................... 19
APPENDIX ............................................................................................................................ 20
SPECIFICATIONS ........................................................................................................ 20
FACTORY PRESET TIMING TABLE ......................................................................... 21
CONNECTOR PIN ASSIGNMENT .......................................................................... 22
WALL MOUNTING (OPTIONAL) ............................................................................. 24
PLANAR SUPPORT ............................................................................................................ 25
2
| FOR YOUR SAFETY
Before operating the monitor, please read this manual thoroughly. This manual should be
retained for future reference.
FCC Class B Radio Frequency Interference Statement
WARNING: (FOR FCC CERTIFIED MODELS)
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
NOTICE:
1. The changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with
the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modification to this equipment. It is the responsibilities of the user to
correct such interference.
WARNING:
To prevent re or shock hazard, do not expose the monitor to rain or moisture. Dangerously
high voltages are present inside the monitor. Do not open the cabinet. Refer servicing to
qualied personnel only.
3
Disposal of waste equipment by user in private household in the European Union
This symbol on the product or on its packaging indicates that this
product must not be disposed of with your other household waste.
Instead, it is your responsibility to dispose of your waste equipment
by handing it over to a designated collection point for the recycling
of waste electrical and electronic equipment. The separate collection
and recycling of your waste equipment at the time of disposal will
help to conserve natural resources and ensure that it is recycled in a
manner that protects human health and the environment. For more
information ab ut where you can drop off your waste equipment for
recycling, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
PRECAUTIONS
• Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry
tub, swimming pool or in a wet basement.
• Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can
injure a person and cause serious damage to the appliance. Use only a cart or stand
recommended by the manufacturer or sold with the monitor. If you mount the monitor
on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit
instructions.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation.
To ensure reliable operation of the monitor and to protect it from overheating, be sure
these openings are not blocked or covered. Do not place the monitor on a bed, sofa, rug,
or similar surface. Do not place the monitor near or over a radiator or heat register. Do not
place the monitor in a bookcase or cabinet unless proper ventilation is provided.
• The monitor should be operated only from the type of power source indicated on the
label. If you are not sure of the type of power supplied to your home, consult your dealer
or local power company.
• The monitor is equipped with a three-pronged grounded plug, a plug with a third
(grounding) pin. This plug will t only into a grounded power outlet as a safety feature.
If your outlet does not accommodate the three-wire plug, have an electrician install the
correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety
purpose of the grounded plug.
4
• Unplug the unit during a lightening storm or when it will not be used for long period of
time. This will protect the monitor from damage due to power surges.
• Do not overload power strips and extension cords. Overloading can result in fire or
electric shock.
• Never push any object into the slot on the monitor cabinet. It could short circuit parts
causing a re or electric shock. Never spill liquids on the monitor.
• Do not attempt to service the monitor by yourself; opening or removing covers can
expose you to dangerous voltages and other hazards. Please refer all servicing to qualied
service personnel.
• To ensure satisfactory operation, use the monitor only with UL listed computers which
have appropriate congured receptacles marked between 100 - 240V AC, Min. 5A.
• The wall socket shall be installed near the equipment and shall be easily accessible.
5
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitor and do not indicate a problem.
NOTES
• Due to the nature of the uorescent light, the screen may icker during initial use. Turn o
the Power Switch and then turn it on again to make sure the icker disappears.
• You may nd slightly uneven brightness on the screen depending on the desktop pattern
you use.
• The LCD screen has eective pixels of 99.99% or more. It may include blemishes of 0.01%
or less such as a missing pixel or a pixel lit all of the time.
• Due to the nature of the LCD screen, an after image of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screen is recovered slowly by changing the image or turning off the Power Switch for
hours.
• When the screen becomes black or ashing, or cannot illuminate any more, contact your
dealer or service center to replace parts. Don’t repair the screen by yourself!
| BEFORE YOU OPERATE THE MONITOR
FEATURES
• 21.5” (54.6 cm) Wide Screen TFT Color Monitor
• 16:9 Widescreen
• Crisp, Clear Display for Windows
• Recommened Resolutions: 1920*1080@60Hz
• LED backlit, energy ecient
• Ergonomic Design
• Space Saving, Compact Case Design
• USB 3.0 hub
Use extreme caution when unpacking your monitor as the deskstand is springloaded. Failure to follow the instructions below may lead to physical harm.
1. Lay the monitor at on an even surface –display facing up
2. Remove Styrofoam
3.
Remove the orange strap
4.
Remove the bag
6
PACKAGE LIST
The product package should include the following items:
Monitor
Power Cable
Audio Cable
User's Guide
VGA Cable
USB Cable
HDMI Cable
DVI Cable
7
ADJUSTING THE HEIGHT
The monitor's height may be adjusted from 4.8in to 15.2in (122mm to 385mm).
122mm
8
Loading...