Page 1
Clarity MX46HD and MX55 LCD Video Wall Quick Start Guide
Page 2
Page 3
Copyright © 1 Feb 2013 by Planar Systems, Inc. All rights reserved.
Contents of this publication may not be reproduced in any form without permission of Planar
Systems, Inc.
Trademark Credits
Windows™ is a trademark of Microsoft Corp.
Planar's Big Picture™ is a trademark of Planar Systems, Inc.
Planar’s EasyAxis™ is a trademark of Planar Systems, Inc.
All other names are trademarks or registered trademarks of their respective companies.
Disclaimer
The information contained in this document is subject to change without notice. Planar
Systems, Inc. makes no warranty of any kind with regard to this material. While every
precaution has been taken in the preparation of this manual, the Company shall not be liable
for errors or omissions contained herein or for incidental or consequential damages in
connection with the furnishing, performance, or use of this material.
Warranty and Service Plans
Planar warranty and service plans will help you maximize your investment by providing great
support, display uptime, and performance optimization. From post-sale technical support to
a full suite of depot services, our services are performed by trained Planar employees. When
you purchase a Planar product, you get more than a display, you get the service and support
you need to maximize your investment. To find the latest warranty and service information
regarding your Planar product, please visit http://www.planarcontrolroom.com/support
RoHS Compliance Statement
The Clarity Matrix Video Walls are fully RoHS compliant.
ADA Compliance Statement
The Clarity Matrix Video Walls are compliant with the Americans with Disabilities Act.
Part Number: 020-1220-00A
Clarity Matrix Video Wall Installation Guide iii
Page 4
iv Clarity Matrix Video Wall Installation Guide
Page 5
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Important EMC Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
European Union Disposal Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Recommended Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Burn-In Versus Temporary Image Retention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Normal Use Thermal Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
System Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
EasyAxis Mounts, General Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Matrix Video Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
LCD Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
LCD Mounting Structure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Off-Board Equipment and Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Quad Controller Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Power Supply Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Installing a Clarity Matrix LCD Video Wall. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Tools/Equipment List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Other Things You May Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Plan Your Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Prepare Your Installation Location. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Installation Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Unpacking and Checking Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Electronics Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
LCD Module Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Accessory Box(es). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Accessory Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Optional Planar-Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Regulatory Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Clarity Matrix Video Wall Quick Start Guide i
Page 6
Table of Contents
ii Clarity Matrix Video Wall Quick Start Guide
Page 7
Introduction
The Clarity Matrix LCD Video Wall System uses cutting edge technology to provide a
video wall solution using commercial-grade 46” and 55” full high definition (FHD)
LCDs in a tiled application. The narrow-bezel results in a 5.7mm pixel-to-pixel gap
between images on adjacent panels in a video wall. Each LCD module is an HDTV
format with a 1920 x 1080 resolution. Each LCD module has a 3.6” installed depth and
has an aspect ratio of 1.77 (16:9). It accepts a wide range of input DVI signals from
VGA to UXGA.
The EasyAxisTM mounting system supports landscape and portrait orientation, freestanding wall deployment and flying wall applications. Because the panels are selfsupporting, Clarity Matrix can support unlimited stacking height.
Caution: This manual is intended for use by qualified service persons and end users with
experience installing LCD displays.
Clarity Matrix Video Wall Quick Start Guide 1
Page 8
Safety Information
Safety Information
This display was designed with safety in mind. If you don’t heed the safety warnings
and cautions, you could get hurt. The safety warnings are on stickers in various places
in and on the display.
Important Safety Instructions
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use any of the Clarity Matrix LCD Video Wall products near water.
6 Clean the LCD screens with an LCD screen cleaner or LCD wipes.
7 Do not install near any heat sources such as radiators, heat registers, stoves or
other apparatus (including amplifiers) that produce heat.
8 Do not defeat the safety purpose of the polarized or grounding type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. When the provided plug does not fit into your
outlet, consult an electrician for the replacement of the obsolete outlet.
9 Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles and the point where they exit from any of the Clarity
Matrix LCD Video Wall products.
2 Clarity Matrix Video Wall Quick Start Guide
Page 9
Safety Information
10 Only use the attachments/accessories specified by the manufacturer.
11 Unplug all Clarity Matrix LCD Video Wall products during lightning storms or
when unused for long periods of time.
12 You must follow all National Electrical Code regulations. In addition, be aware of
local codes and ordinances when installing your system.
13 Refer all servicing to qualified service personnel. Servicing is required when any
of the Clarity Matrix LCD Video Wall products have been damaged in any way,
such as the AC power cord or plug is damaged, liquid has been spilled or objects
have fallen into a product, the products have been exposed to rain or moisture,
do not operate normally or have been dropped.
14 Keep the packing material in case the equipment should ever need to be
shipped.
15 Wall mounts must be secure. The wall must be strong enough to hold all LCD
modules, brackets and cables. Each MX46HD weighs about 39lbs (17.7kg) and
each MX55 LCD module weighs about 50lbs (23kg). With protective optically
bonded glass, the MX46HD LCD module weighs about 49lbs (22.2kg) and the
MX55 LCD module weighs about 65lbs (29kg).
16 Slight pressure on the LCD will cause distortion of the image. Heavier pressure
will cause permanent damage. Clarity Matrix Video Walls should be mounted
where viewers cannot touch the screen or insert small objects in the openings
that will create hazards by contacting bare conductive parts.
Caution: The front polarizer is soft and subject to scratches from sharp objects.
17
The polarizer is a thin sheet of film laminated to the outside layer of glass on the
LCD screen. Take care when handling items near the screen.
Caution: This product contains a lithium battery. There is a risk of explosion if the battery is
replaced by an incorrect type. Dispose of the battery according to the instructions on the
next page.
Important EMC Information
In order to meet Electromagnetic Compatibility (EMC requirements), the installer will
need to add one clip on ferrite bead to the 24VDC power cable near each LCD.
Clarity Matrix Video Wall Quick Start Guide 3
Page 10
Safety Information
English
■ Disposal of old Electrical & Electronic Equipment (Applicable throughout
the European Union and other European countries with separate collection
programs)
This symbol found on your product or on its packaging, indicates that
this product should not be treated as household waste when you wish to
dispose of it. Instead, it should be handed over to an applicable collection
point for the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent potential
negative consequences to the environment and human health, which
could otherwise be caused by inappropriate disposal of this product. The
recycling of materials will help to conserve natural resources.
This symbol is only valid in the European Union.
If you wish to discard this product, please contact
your local authorities or dealer and ask for the correct method of disposal.
Español
■ Deshecho de equipos eléctricos y electrónicos (aplicable a la Unión Euro-
pea y a otros países europeos con programas de reciclaje independientes)
La presencia de este símbolo en el propio producto o en su material de
embalaje, indica que no se debe tratar como residuo doméstico cuando
desee deshacerse de él. En su lugar, debe entregarlo en el punto limpio
correspondiente de reciclaje de equipos eléctricos y electrónicos. Asegurándose de que este producto se desecha de forma correcta, ayudará
a evitar posibles consecuencias negativas para la conservación del
medioambiente y la salud humana, consecuencias que podrían darse si
se deshace del producto de forma inadecuada. El reciclado de materiales
ayuda a conservar los recursos naturales.
Este símbolo solamente es válido en la Unión
Europea.
Si desea deshacerse de este producto, póngase
en contacto con las autoridades locales o con su
distribuidor y pida información sobre el método de
disposición adecuado.
Français
■ Mise au rebut des équipements électriques et électroniques usagés
(Valable dans l’ensemble de l’Union Européenne ainsi que dans les pays
européens disposant de programmes distincts de collecte des déchets)
Ce symbole appliqué sur votre produit ou sur son emballage indique
que ce produit ne doit pas être traité comme un déchet ménager lorsque
vous voulez le mettre au rebut. Il doit au contraire être remis à un site
de collecte agréé pour le recyclage des équipements électriques et
électroniques. En veillant à ce que ce produit soit mis au rebut de façon
adéquate, vous contribuerez à prévenir les conséquences potentiellement
négatives sur l’environnement et sur la santé humaine qui risqueraient
de se produire en cas de mise au rebut inappropriée de ce produit. Le
recyclage des matériaux contribuera également à économiser les ressources naturelles.
Ce symbole n’est valable que dans l’Union Européenne.
Si vous souhaitez mettre ce produit au rebut, veuillez
prendre contact avec les autorités locales ou avec votre
revendeur et renseignez-vous sur la méthode de mise
au rebut correcte.
Italiano
■ Smaltimento delle attrezzature elettriche ed elettroniche usate (applicabile
in tutta la Comunità Europea ed altri Paesi Europei che applicano
programmi di raccolta differenziata)
Il simbolo trovato sul prodotto, o sulla sua confezione, indica che il
prodotto non può essere trattato come i domestici quando è il momento
di smaltirlo. Al contrario, deve essere consegnato ad un centro di raccolta
specializzato nel riciclaggio di attrezzature elettriche ed elettroniche. Assicurando che il corretto smaltimento di questo prodotto, si aiuterà a prevenire potenziali conseguenze negative sull’ambiente e sulla salute umana,
che possono essere provocate da uno scorretto smaltimento di questa
attrezzatura. I materiali riciclati aiuteranno a conservare le risorse naturali.
Questo simbolo è valido solo nell’Unione Europea.
Per smaltire questo prodotto, mettersi in contatto con
le autorità locali – o con il rivenditore – e chiedere
informazioni sul corretto metodo di smaltimento.
Deutsch
■ Entsorgung von elektrischen & elektronischen Altgeräten (geltend für die
europäische Gemeinschaft und andere europäische Länder mit separaten
Sammelprogrammen)
Dieses Symbol, zu finden auf Ihrem Produkt oder dessen Verpackung,
macht Sie darauf aufmerksam, dass dieses Produkt bei der Entsorgung
nicht als Hausmüll behandelt werden darf. Statt dessen sollte es an eine
Sammelstelle zum Recycling von elektrischen und elektronischen Altgeräten gegeben werden. Helfen Sie mit, potenziell schädliche Einflüsse
auf Umwelt und Gesundheit, die durch eine unsachgemäße Entsorgung
dieses Produktes entstehen können, zu vermeiden und entsorgen Sie
dieses Produkt ordnungsgemäß. Recycling hilft, natürliche Rohstoffe
einzusparen.
Dieses Symbol ist nur innerhalb der europäischen
Gemeinschaft gültig.
Wenn Sie dieses Produkt entsorgen möchten, wenden
Sie sich bitte an Ihre örtliche Behörde und fragen Sie
nach der ordnungsgemäßen Entsorgungsmethode.
Nederlands
■ Verwijderen van oude elektrische en elektronische apparatuur (toepas-
selijk in de volledige Europese Unie en andere Europese landen met
afzonderlijke programma’s voor afvalverzameling)
Dit symbool dat op het product of zijn verpakking is aangebracht, geeft aan
dat dit product niet mag worden behandeld als huishoudelijk afval als u het
wilt wegwerpen. U moet het afgeven bij een specifiek verzamelpunt voor
de recyclage van elektrische en elektronische apparatuur. Door te garanderen dat u dit product op de correcte manier wegwerpt, helpt u potentiële
negatieve gevolgen voor het milieu en de menselijke gezondheid, die
zouden kunnen worden veroorzaakt door een onrechtmatig wegwerpen
van het product, te voorkomen. De recyclage van materialen helpt het
behoud van natuurlijke bronnen.
Dit symbool is alleen geldig in de Europese Unie.
Als u dit product wenst weg te gooien, dient u contact op
te nemen met uw lokale instanties voor details over de
gepaste methode voor afvalverwijdering.
Português
■ Eliminação de equipamentos eléctricos e electrónicos usados (aplicável
na União Europeia e noutros países europeus com programas próprios de
recolha destes equipamentos)
Este símbolo, colocado no produto ou na respectiva embalagem, indica
que o produto não deve ser tratado como lixo doméstico aquando da sua
eliminação. Em vez disso, deve ser entregue num ponto de recolha de equipamentos eléctricos e electrónicos para posterior reciclagem. Ao garantir
a correcta eliminação deste produto, estará a evitar consequências potencialmente negativas tanto para o ambiente como para a saúde humana. A
reciclagem de materiais ajuda a preservar os recursos naturais.
Este símbolo apenas é válido na União Europeia.
Se quiser eliminar este produto, contacte as entidades locais ou o seu fornecedor para ficar a saber
qual o método de eliminação correcto.
Svenska
■ Avfall av förbrukad elektrisk och elektronisk utrustning (Tillämpbart i
hela Europeiska unionen och andra europeiska länder med separata
samlingsprogram)
Den här symbolen som finns på din product eller på dess förpackning
påvisar att produkten inte ska behandlas som hushållsavfall när du vill
slänga bort den. Istället ska den lämnas över till en lämplig uppsamlingspunkt för återvinning av elektriska och elektroniska utrustningar. Genom att
tillförsäkra att den här produkten återvinns på ett riktigt sätt hjälper du till
med att förhindra möjliga negative konsekvenser för miljön och mänsklig
hälsa. Det kan annars orsakas på grund av olämplig sophantering av den
här produkten. Återvinning av material kommer att hjälpa till att bevara
naturtillgångar.
Den här symbolen är endast giltig inom den
Europeiska unionen.
Om du vill slänga bort den här produkten ska du
kontakta lokala myndigheter eller återförsäljar, och
fråga efter lämplig avfallsmetod.
Polski
■ Usuwanie zużytego sprzętu elektrycznego i elektronicznego (Dotyczy
krajów Unii Europejskiej i innych krajów europejskich z oddzielnymi
programami zbiórki odpadów)
Obecność tego symbolu na produkcie lub na opakowaniu z produktem
oznacza, że tego produktu nie można wyrzucać razem z odpadkami
domowymi. Należy go przekazać do punktu zbiórki w celu poddania
recyklingowi podzespołów elektrycznych i elektronicznych. Usunięcie tego
produktu w prawidłowy sposób, pomoże w zabezpieczeniu przed negatywnym wpływem odpadów na środowisko i zdrowie ludzi, powodowanym
przez niewłaściwe usuwanie produktu. Przetwarzanie materiałów pomaga
w zachowaniu zasobów naturalnych.
Ten symbol obowiązuje wyłącznie w krajach Unii
Europejskiej.
Informacje dotyczące prawidłowej metody usunięcia
tego produktu, można uzyskać u władz lokalnych lub
u dostawcy.
Suomi
■ Vanhojen sähkö- ja elektroniikkalaitteiden hävittäminen (Soveltuva kaik-
kialla Euroopan unionin alueella, sekä muissa Euroopan maissa, joilla on
erilliset keräysohjelmat)
Jos tuotteessa tai sen pakkauksessa on tämä symboli, sitä ei pidä
hävitettäessä käsitellä tavallisena kotitalousjätteenä, vaan se kuuluu toimittaa sähkö- ja elektroniikkalaitteiden kierrätyspisteeseen. Varmistamalla,
että tämä tuote hävitetään asiaankuuluvalla tavalla autat estämään mahdollisia ympäristölle ja ihmisille koituvia negatiivisia seuraamuksia, joita
sen vääränlainen hävittäminen voi aiheuttaa. Materiaalien kierrättäminen
auttaa säilyttämään luonnonvaroja.
Tämä symboli on voimassa ainoastaan Euroopan
unionin alueella.
Jos haluat hävittää tämän tuotteen, ota yhteyttä
paikallisiin viranomaisiin tai jälleenmyyjään ja tiedustele
asiaankuuluvia hävittämistoimenpiteitä.
European Union Disposal Information
4 Clarity Matrix Video Wall Quick Start Guide
Page 11
Recommended Usage
In order to get the most out of your LCD modules, use the following recommended
guidelines to optimize the display.
Burn-In Versus Temporary Image Retention
Burn-in causes the screen to retain an image essentially forever, with little or no way
to correct the problem. Under normal use, an LCD module will not experience burnin, as plasma displays do, nor will it retain images in any way.
Normal use of an LCD module is defined as displaying continuously changing video
patterns or images. However, LCD modules can experience temporary image
retention when recommended usage guidelines are not followed.
What is Temporary Image Retention?
Temporary image retention (TIR) can occur when a static image is displayed
continuously for extended periods of time. An electrical charge differential may build
up between the electrodes of the liquid crystal, which causes a negative-color video
image (color-inverted and brightness-inverted version of the previous image) to be
retained when a new image is displayed. This behavior is true for any LCD device
from any LCD manufacturer.
Recommended Usage
TIR is not covered under warranty. See standard warranty terms and conditions for
details. Here are some guidelines to help you avoid TIR:
• Use the LCD module to show a screen saver, moving images or still pictures that
change regularly. When using high-contrast images, reposition the images
frequently.
• Turn off the LCD module when it is not in use. There are a few ways to do this
automatically:
• To use the LCD module’s real-time clock, see "Setting the Clock/Scheduling
an Event" on page 55.
• To use your source computer’s Power Options Properties, set up your
computer to turn off the display when not in use. You also need to check the
DPMS checkbox and set the DPMS DELAY box in the BACKLIGHT SETTINGS menu
MAIN MENU > ADVANCED OPTIONS > BACKLIGHT SETTINGS).
(
• To use RS232 commands, see "RS232 Communication" on page 69.
Caution: For optimal performance, we suggest turning off the backlight power on the Matrix
MX for four hours per day.
Clarity Matrix Video Wall Quick Start Guide 5
Page 12
Recommended Usage
Normal Use Thermal Guidelines
Normal use of the LCD module, Quad controller module and power supply module
are defined as operating in the open air to prevent heat buildup, and without direct
or indirect heat sources such as lighting fixtures, heating ducts, or direct sunlight that
can cause the modules to experience high operating temperatures. For all modules,
do not block fans or ventilation openings. If the LCD module will be installed in a
recessed area with an LCD surround or enclosure, ensure adequate openings are
applied for proper air flow and ventilation.
At 2000 meters or below, the maximum ambient operating temperature for the LCD
module cannot be above 35º C nor below the minimum ambient operating
temperature of 0º C. For the Quad controller module and power supply module, the
maximum ambient operating temperature cannot be above 45º C nor below the
minimum ambient operating temperature of 0º C. If one of these conditions exists, it
is up to the installer to ensure that module placement is changed, thermal shielding
is provided and/or additional ventilation is provided to keep the display within its
nominal operating parameters.
Cooling Requirements
For optimal performance, active cooling by the installer should be planned for when
the ambient temperature at the top of the wall is predicted to be above the specified
ambient temperature for the panel. Cooling may be done behind the displays and
depending on the wall configuration, it may be helpful to place air ducts (AC) at
every third display tall.
6 Clarity Matrix Video Wall Quick Start Guide
Page 13
System Architecture
LCD mo dule - rea r
view - MX55
Power supply module
Quad controller module
LCD module - front view
The Clarity Matrix Video Wall has three main electronic components: the LCD
module, power supply module and the Quad controller module. The LCD module has
a removable interface board, which connects to the off-board power supply and
Quad controller modules. Using external modules produces less heat and allows for
reduced and/or easier service of the LCD module itself.
System Architecture
Some basic points to keep in mind:
• Each Quad controller module controls up to four LCDs
• Modules are linked together by RS485 cables
• The first processor in the A Quad controller module (A1) is the master processor
• The master processor takes in the input from the IR remote sensor and/or the
host RS232 commands
Clarity Matrix Video Wall Quick Start Guide 7
Page 14
EasyAxis Mounts, General Description
B3 B4
B2
A4
A2A1
A3
B1
Quad Controller
Dual Link In
Digital 1
Digital 4
Digital 3
Digital 2
Loop Out
Quad Controller
Dual Link In
Digital 1
Digital 4
Digital 3
Digital 2
Loop Out
A
B
RS485
RS-232
IR
The following example shows the connections for a basic video wall.
EasyAxis Mounts, General Description
Planar-supplied mounts are used to secure the Clarity Matrix Video Wall for display.
Follow these instructions carefully.
Keep in mind the following general installation guidelines:
• Prior to installation, make sure you know where all of the mounting points are
located.
• Follow all safety precautions outlined in this manual.
• Verify the parts received with the list shown in this manual.
8 Clarity Matrix Video Wall Quick Start Guide
Page 15
Matrix Video Wall
The Clarity Matrix LCD Video Wall consists of several different modules. These are
described in more detail on the following pages.
LCD Modules
The LCD module is composed of a basic LCD without a cosmetic enclosure but with a
mechanical subframe for mounting. The LCD module incorporates a simple interface
board designed to distribute off-board power, video and control signals to the LCD
module, keeping depth, weight, heat and points of potential failure to a minimum.
The LCD blade-style module incorporates a bracket that is perfectly paired with the
EasyAxis mount. The LCD module includes EasyAxis adjustment cams that facilitate
precise six-axis alignment ensuring uniform, minimized image-to-image gap.
LCD Modules
Note: This shows a rear picture of the MX55. The rear of MX46HD will look different.
Clarity Matrix Video Wall Quick Start Guide 9
Page 16
LCD Mounting Structure
LCD Mounting Structure
The EasyAxis mounting system simplifies the task of installing and aligning the LCD
modules while allowing for efficient in-wall service. EasyAxis is designed to be
attached to a wall, used with optional free-standing bases or secured overhead in a
flying configuration. When assembled, horizontal and vertical connection brackets
ensure that each mount is perfectly spaced from its neighbor in the video wall. The
mount system also incorporates a service mode to accommodate front and rear inwall repair of any LCD module in the video wall.
10 Clarity Matrix Video Wall Quick Start Guide
Page 17
LCD Mounting Structure
120,1$/*$3
120,1$/*$3
',63/$<287/,1(6
9(57,&$/$/,*10(17
%5$&.(7686(0;
%87721+($'6&5(:6
+25,=217$/$/,*10(17
%5$&.(7686(0;
%87721+($'6&5(:6
.,&.67$1')25
6(59,&(02'(
&(17(5,1*
127&+
Note: This drawing shows portrait LCD mounts for the MX55. See "Matrix Dimensions" on
page 173 for complete drawings of the MX55 and the MX46HD.
EasyAxis mounts are designed to facilitate the thinnest profile LCD video wall. The
combination of the mount plus the Matrix LCD module’s “blade” design results in
video walls that measure 3.6 inches in depth, screen to wall.
Clarity Matrix Video Wall Quick Start Guide 11
Page 18
Off-Board Equipment and Components
Air intake - keep clear
Address selector
Power switch
DVI-D digital
input or Loop In
DVI-D digital
input
Communication/video
to LCD
Air exhaust vents keep clear
Power supply
monitor connection
DVI-D Digital
Loop Out
Off-Board Equipment and Components
To reduce heat issues and to make servicing of the video wall easier, the two main
Matrix components are modules that are separate from the LCD module itself. The
Quad controller modules and power supply modules can be housed in an equipment
rack that is typically situated away from the video wall itself.
Quad Controller Module
The Quad controller module contains four microprocessors, each of which manages
the video information flowing to one LCD module. The Quad controller module
routes up to four digital source inputs to the LCDs. For more information about what
the different LEDs on the front of the Quad controller module mean, see "Quad
Controller Status LEDs" on page 58.
Front View
Rear View
12 Clarity Matrix Video Wall Quick Start Guide
Page 19
Power Supply Module
Air intakes - keep clear
Power supply test switches
Interface module
power outlets
AC power switch
115/230 VAC 50/60Hz
20A IEC C20 AC input
Air exhaust vents keep clear
Quad controller
module power outlet
Power supply
monitor connection
Depending on your configuration,
these two outlets may be covered.
The power supply module provides power for up to four LCDs and one Quad
controller module.
Front View
Rear View
Off-Board Equipment and Components
Clarity Matrix Video Wall Quick Start Guide 13
Page 20
Off-Board Equipment and Components
14 Clarity Matrix Video Wall Quick Start Guide
Page 21
Installing a Clarity Matrix LCD Video Wall
This section explains how to install a Clarity Matrix Video Wall. We suggest that you
read this entire section before you attempt to install the wall.
Before You Begin
Make sure you have all the items in the following lists before you begin unpacking
and installing your Clarity Matrix Video Wall(s).
Tools/Equipment List
Depending on your installation, you may need one or more of the following items:
• Drill and bits
• Nut drivers
•Pencil
• 3mm hex key
• M6 (#1/4-20) wrench
• String/string level
• Digital/laser level
• Ladders/lift
• Back brace
• Stud finder (if hanging LCD modules on a wall)
• Quad controller module address adjustment tool (included in your accessory
kit)
Other Things You May Need
• LCD screen cleaner or LCD wipes - available at most electronics stores
At least two capable people to lift LCD modules into place
•
Clarity Matrix Video Wall Quick Start Guide 15
Page 22
Before You Begin
Plan Your Installation
You should have a detailed plan of how the Clarity Matrix Video Wall is to be
configured. The plan should include calculations for the following:
• Floor/wall load. Make sure the floor/wall is strong enough to support the
weight of the whole Matrix system.
• To determine the total power consumption, you will need to calculate the size
of the wall first.
• The minimum space above the top LCD row for installation and servicing
clearance is 5”. For passive cooling, it is recommended that a minimum of 8-10”
of top clearance is provided. This can be reduced if the LCD array is actively
cooled or open in the back and may need to be increased for very high walls.
• Access to both sides of the Quad controller modules and the power supply
modules.
• Ventilation and cooling requirements. Although most of the heating elements
are not in the LCD itself, it is still important that you have proper cooling and
ventilation for the entire Clarity Matrix Video Wall and its off-board
components.
• Power consumption of each individual component and the power
consumption of the overall wall.
Component Typical Maximum BTU Calculation
Power supply module 60W 60W x 3.42 = 205.2 BTU
Quad controller module 55W 55W x 3.42 = 188.1 BTU
MX46HD LCD module 115W 150W 115W x 3.42 = 393.3 BTU
MX55 LCD module 156W 212W 156W x 3.42 = 533.5 BTU
To calculate the overall power consumption of the wall, add the wattage of the
power supply module, plus the Quad controller module, plus four LCDs per power
supply module. For example, using the table above for a 2 x 2 video wall, you would
have the following calculation:
• 60W (Power supply module) +
• 55W (Quad controller module) +
• 460W (115W x 4 MX46HD LCD modules) =
Note: The above example assumes a typical installation with the backlight set at the default
setting.
575W total power consumption
16 Clarity Matrix Video Wall Quick Start Guide
Page 23
Before You Begin
Supported Matrix Cable Lengths
Co n f id e n t i a l | © 2010 Planar Systems, Inc. | Slide 10
Matrix Video Extender
L X/M X 46 Sup por ted Len gt hs
Cable Sets
…
…
Ma t r ix Vi deo
Ex tender
Every 100 ft.
Ma t rix Q u a d
Controller Module
Bulk Cables and Connectors Available to Support Custom Lengths
Matrix Power Supply
Module
Standard Configuration Support
Cab le Sets
B ulk c abl es an d c on n ec tor s avai la ble to
support custom lengths
MX46HD/MX55
S upp or t ed Len gths
Ple num
offering
coming
soon
• Cable runs - Account for how long cable runs need to be and where they will be
routed. The following table shows the maximum length allowed for power, data
and video cables. The diagram below provides more detailed information about
the supported cable lengths.
Cable Type Maximum Length
Power cable 250 feet
COMM cable 500 feet
Video Cable 100 feet
Note: You can use cable extenders to a maximum of 500
feet using four extender boxes. When using cable
extenders, all increments should be 100 feet or less.
Clarity Matrix Video Wall Quick Start Guide 17
Page 24
Before You Begin
Prepare Your Installation Location
You should have prepared the area where you will install the Clarity Matrix Video
Wall. The mounting structures must be fully designed to accommodate the
installation of the LCD modules. You must also make sure there is enough room for
the off-board components and any equipment racks that might house these
components.
18 Clarity Matrix Video Wall Quick Start Guide
Page 25
Installation Checklist
Wall outlet
Power supply
monitor cable
Power supply
monitor cable
Wall outlet
Quad Controller A
Quad Controller B
Power Supply Module
Power Supply Module
Video Cat 6 cable
Data Cat 6 cable
AC power cord
AC power cord
Power cable
Power cable
IR sensor cable
RS485 cable
Power cable
LCD
Use this quick checklist as a guide to ensure you have performed the installation
steps in the correct order.
1 Unpack and install the LCD mount brackets.
2 Install Quad controller modules and power supply modules.
3 Run cables between LCD mount and brackets.
4 Install LCD modules.
Unpacking and Checking Accessories
The following diagram shows a basic connection of the different cables that connect
to the different modules.
Installation Checklist
Clarity Matrix Video Wall Quick Start Guide 19
Page 26
Unpacking and Checking Accessories
Electronics Box
The following items are included in the electronics box.
Part Description
Per
Quad/Power
Supply
Picture
Quad
controller
module
Power
supply
module
Power
cable (4ft)
RJ45 to
RJ45 patch
cable (1m)
Routes up to four
digital source
images to the LCDs.
Supplies power for
up to four LCDs and
one Quad controller
module.
Connects the power
supply module to
the Quad controller
module.
One cable connects
the Quad controller
module to the
power supply
module. The other
cable connects one
Quad controller
module to another.
1
1
1
2
Note: It is highly recommended that you use the cable label maker to identify each cable
before it is installed.
20 Clarity Matrix Video Wall Quick Start Guide
Page 27
LCD Module Box
The following items are included in the LCD module box.
Unpacking and Checking Accessories
Part Description Picture
LCD module 1 or 2 per box
depending on your
order.
LCD mount 1 or 2 per box
depending on your
order.
Clarity Matrix Video Wall Quick Start Guide 21
Page 28
Unpacking and Checking Accessories
Accessory Box(es)
The following items are provided in the larger accessory box, which also contains the
accessory kit box. The contents of this box are described below.
Part Description Number Picture
Vertical
bracket
Horizontal
bracket
(landscape)
Horizontal
bracket
(portrait)
Secures the LCD
mount.
Secures the
landscape LCD
mount.
Secures the portrait
LCD mount.
Depends on
configuration
requirements.
Depends on
configuration
requirements.
Depends on
configuration
requirements.
AC power
cable (3m)
Ferrite bead Attached to each
22 Clarity Matrix Video Wall Quick Start Guide
Depending on your
order, the cable will
be for use in North
America or Europe.
LCD to meet EMC
requirements.
1 per power
supply
module
One per LCD
panel.
Page 29
Accessory Kit
ON
**
PICTURE
WALL
SOURCE
BALANCE
MISC
MONITOR
MENU PREV ENTER
- +
OFF
SAVE
Clarity Matrix
TOP
Unpacking and Checking Accessories
The following items are included in the accessory kit, which is inside the larger
accessory box.
Part Description
Number
Included
Gloves Used to handle LCDs. 2 pairs
Remote control Used to control your on-
2
screen menus.
Picture
Remote control
stand
Installation
manual
Clarity Matrix Video Wall Quick Start Guide 23
Used to hold your remote
control.
Provides detailed setup and
configuration information.
2
1
Page 30
Unpacking and Checking Accessories
Part Description
IR sensor Connects to Quad controller
module A. Mount in a
convenient location near
your wall. Typically, this
might be near the master
(A1) display.
Note: Keep in mind that you
need to point the remote
towards where the IR sensor
is mounted.
Cable labels Used to help you identify
each cable.
Number
Included
1
1 dispenser
of 150
labels
Picture
3mm assembly
and alignment
tool
Quad controller
module address
adjustment tool
Used to align modules. 2
Used to set addresses of
Quad controller modules.
2
24 Clarity Matrix Video Wall Quick Start Guide
Page 31
Optional Planar-Supplied Accessories
Make sure you have the following optional customer-supplied items as needed to
complete your installation:
• Curved brackets
• Stud adapter bracket
• WallNet
• Wall adapter bracket (see "Wall Adapter Bracket" on page 191)
• Floor stand
• Outer edge/rear cosmetic trim (see "Cosmetic Trim" on page 193)
• Dual link DVI-D cable
• DVI-D cables to go from the source to the Quad controller module
• RS232 cables to link an external controller to the Quad controller module
• Cat 6 -STP video and data cables - Length varies per wall depending on
configuration requirements and your sales order.
• Power cable (20ft-100ft) - Connects the power supply module to the LCD.
Length varies per wall depending on configuration requirements and your sales
order.
• IR sensor extender cable (3m) - Used to extend from the wall to the Quad
controller module.
• Matrix Video Extender Box - The video extender box allows you to extend the
distance of the Quad controller modules to the LCD modules in 100 foot
increments.
• DVI booster - When using the Dual Link In connector for looping between the
Quad controller modules, it may be necessary to add a DVI booster to avoid
having data glitches occur in some installations due to increased noise
sensitivity on that connector.
Unpacking and Checking Accessories
Clarity Matrix Video Wall Quick Start Guide 25
Page 32
Unpacking and Checking Accessories
26 Clarity Matrix Video Wall Quick Start Guide
Page 33
Regulatory Information
Manufacturer's Name: Planar Systems, Inc.
Manufacturer's Address: 1195 NW Compton Drive
Beaverton, OR 97006
Declares that the products Model Numbers: Clarity Video Matrix Wall
Conforms with the provisions of:
Council Directive 2004/108/EC on Electromagnetic Compatibility;
EN55022:2006+A7 Radiated and Conducted Emissions from IT Equipment
EN55024:1998 Immunity of IT Equipment
Including: EN61000-4-2 Electrostatic Discharge
EN61000-4-3 Radiated Immunity
EN61000-4-4 Electrical Fast Transients
EN61000-4-5 Line Surge
EN61000-4-6 RF Conducted Susceptibility
EN61000-4-8 Magnetic Field Immunity
EN61000-4-11 Voltage Dips and Interrupts
And: EN61000-3-2 Harmonic Current Emissions
EN61000-3-3 Voltage fluctuations and Flicker
Council Directive 2006/95/EC on Low Voltage Equipment Safety:
EN60950:2006+A11 Safety of IT Equipment
The Technical Construction File required by this Directive is maintained at the corporate headquarters of Planar Systems,
Inc., 1195 NW Compton Drive, Beaverton, OR 97006.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Industry Canada (ICES-003): This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Any changes or modifications to the display not expressly approved by Planar could void the user's authority to operate this
equipment.
Other Certifications
CISPR 22
Clarity Matrix Video Wall Quick Start Guide 27
Page 34
28 Clarity Matrix Video Wall Quick Start Guide
Page 35
Index
A
accessories
accessory box contents, 22
accessory kit contents, 23
checking, 19
customer-supplied, 25
electronics box contents, 20
LCD module box contents, 21
optional, 25
address adjustment tool, 24
alignment tool, 24
avoiding temporary image retention, 5
B
basic
connections example, 8
before you begin
installing a wall, 15
tools/equipment list, 15
brackets
horizontal, 22
vertical, 22
D
disposal information, 4
E
EasyAxis, 1, 21
description of mounts, 8
mounting structure, 9, 10
equipment
list, 15
rack, 7
european union disposal information, 4
G
gloves for screen handling, 23
H
horizontal
bracket, 22
C
cables
AC power, 22
labels for identifying, 24
power, 20
power supply monitor, 20
certifications, 27
Clarity Matrix Video Wall, 1
system architecture, 7
cleaning the LCD screen, 15
conformity information, 27
cooling requirements, 16
customer-supplied accessories, 25
I
installation
checklist, 19
of video wall, 15
planning, 16
preparing your location, 18
space requirements, 16
introduction, 1
IR sensor, 24
L
labels
for identifying cables, 24
LCD
wipes, 15
Clarity Matrix Video Wall Quick Start Guide i
Page 36
Index
LCD module, 7, 9, 21
contents in box, 21
gloves for handling, 23
mounting structure, 10
weight, 3
LCD mount, 9, 21
M
manufacturer’s address, 27
Matrix video wall
LCD modules, 9
N
normal use thermal guidelines, 6
O
off-board equipment, 12
optional
accessories, 25
S
safety
information, 2
instructions, 2
service plans, iii
space requirements for installation, 16
system
architecture, 7
T
temperature
requirements for normal use, 6
temporary image retention
avoiding, 5
definition, 5
thermal guidelines, 6
see temporary image retention
TIR
tools/equipment list, 15
U
P
planning your installation, 16
power cable, 20
power supply module, 7, 13, 20
operation requirements, 16
power supply monitor cable, 20
preparing your installation location, 18
Q
Quad controller module, 7, 12, 20
address adjustment tool, 24
R
recommended usage, 5
regulatory information, 27
remote control, 23
unpacking accessories, 19
usage information, 5
V
ventilation requirements, 16
vertical
bracket, 22
W
warranty information, iii
weight
LCD module, 3
ii Clarity Matrix Video Wall Quick Start Guide
Loading...