Planar LC12.ANN.1000 User Manual
050-0217-00 REV A
D
4
NOTES:
1. DRAWING TO BE USED FOR REFERENCE.
2. CONNECTORS WILL PROTRUDE FROM REAR
SURFACE (NOT SHOWN).
3. DISPLAY IS MENT TO OPERATE WITH
VANDAL GLASS INSTALLED. (NOT
PROVIDED).
2X
51.2
3
REVISIONS
ZONE REV. DESCRIPTION DATE APPROVED
INITIAL RELEASE
A
12
02/18/05 SV
D
281.8 38.10
9.84X
38.1139.1
16X M5X.8
THREADED INSERTS
16.1
2X 24.4
35.24X
C
45.8
308.10
337.6
248.7
BEZEL
FRONT PANEL
OPEN CLEARANCE
PATTERN FOR VENTILATION.
DO NOT BLOCK.
12.7
54.5
2X
2X
228.60
13.9
12.7
C
53.3
2X
97.7
102.9
62.0
2X 207.01
292
306.6
187.9
BEZEL
2X
132.08
123.6
120°±15°
12V POWER CONN:
2 PIN 'MAT-N-LOK'
AMP 1-480699-0
75°
280
B
33.1
2X 47.3
218.6
24.4
CLEARANCE FOR CONNECTORS
AND CABLES MUST BE
PROVIDED. CONNECTORS
WILL PROTRUDE FROM
REAR SURFACE.
OR EQUIV.
B
99
271.17
THIS DRAWING CONTAINS I NFORMATION PROPRIETARY TO PLANAR SYSTEMS, INC., ANY R EPRODUCTION IN PART OR WH O LE WITHOUT THE WRITTEN PERMISSION OF PLANAR SYSTEMS
IS PROHIBITED. THIS DRA WING IS SUPPLIED FOR IN FORMATION, IDENTIFICA TION, ENGINEERING, EVA LUATION, AND/OR INS PECTION PURPOSES O NLY AND MAY NOT BE USED AS BASI S
FOR THE MANUFACTURING OF PRODUCTS OR THE FURNISHING OF SERVICES TO PLANAR SYSTEMS OR TO ANY THIRD PARTY UNLESS AUTHORIZED IN WRITING BY PLANAR SYSTEMS.
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES:
X=
.X= 2.5
DIMENSIONING AND TOLERANCING PER
THIRD ANGLE PROJECTION
.XX= 1.20
ANGLES=
ASME Y14.5M-1994
ENGR BY
S.VAHLSING
DRAWN BY
R.DAVENPORT
CHECKED BY
USED ON
MATERIAL
FINISH
-
12.1 DISPLAY
NA
YELLOW ZINC CHROMOTE
-
02/18/05
-
PLANAR SYSTEMS, INC.
1195 NW COMPTON DRIVE
BEAVERTON, OR 97006 USA
TITLE
DWG-PROD ASM, 12.1 LCD
SIZE
PART NUMBER
C
997-2584-02
SCALE
1:4
DRAWING NO.
074-0666-01
DO NOT SCALE
1234
SHEET
1
OF
AA
REV
A
1
Loading...