Planar D6015TM, D6015TS, D6015TR User Manual

Operations Manual
D6015TM SERIES MEDICAL MONITOR
D6015TM 15" XGA D6015TM;TS 15" XGA, SAW TOUCHSCREEN D6015TM;TR 15" XGA, RESISTIVE TOUCHSCREEN
The Definition of Quality
Planar Systems, Inc. © 2000 “Planar” and “The Definition of Quality” are registered trademarks of Planar Systems, Inc. “ELO” is a registered trademark of Elo TouchSystems, Inc., “GCX” and “GCX Instrument Mounting Systems” are registered trademarks of GCX Corporation. All other trademarks are the property of their respective owners.
This document is subject to change without notice. Planar provides this information as reference only. Reference to other vendors’ products does not imply any recommendation or endorsement.
Revision Control
Date Description
July 2000 Document number OM700-02 (020-0151-00 Rev. C)
Contents
Planar D6015TM Series Medical Monitor........................................................1
Functional Description.................................................................................................1
Product Features ..........................................................................................................2
Cleaning Instructions ...................................................................................................2
Safety Instructions........................................................................................................3
Disposal Information....................................................................................................3
Symbol Explanations ...................................................................................................4
Regulatory Compliance................................................................................................4
EU Declaration of Conformity for Medical Applications.....................................5
Installation............................................................................................................ 6
Identifying Components...............................................................................................7
Front View............................................................................................................7
Rear View .............................................................................................................8
Connecting the Optional Touchscreen.........................................................................9
Positioning...................................................................................................................9
Adjusting the Viewing Angle.....................................................................................10
Connecting AC Power................................................................................................10
Connecting Video ......................................................................................................11
Connecting Optional Stereo Speakers........................................................................11
Power Management System.......................................................................................12
The Display Controls.........................................................................................13
Adjusting the Medical Monitor’s Display..................................................................14
On-Screen Display Lockout................................................................................14
OSD Main Menu.................................................................................................15
Quick Adjustment Functions......................................................................................17
Power Switch.............................................................................................................17
Technical Information.......................................................................................18
Planar D6015TM Series Medical Monitor Specifications.........................................18
Video Modes..............................................................................................................19
Connectors.................................................................................................................20
DC Input.............................................................................................................20
Video Input .........................................................................................................20
Audio Port...........................................................................................................20
Touch Port..........................................................................................................20
Mechanical Outline Drawings.......................................................................... 21
Troubleshooting Procedures............................................................................. 23
PROBLEM: No Signal Coming ..........................................................................23
PROBLEM: Display is Unclear and Unstable ...................................................23
PROBLEM: Signal Over Supported Range........................................................24
PROBLEM: There is No LCD Display...............................................................24
Description of Warranty................................................................................... 25
Commencement and Duration of Warranty........................................................25
Place of Repair or Replacement.........................................................................25
Limitation of Warranty .......................................................................................25
Installation..........................................................................................................26
Technical Assistance...........................................................................................26
Repair Service.....................................................................................................26
Ordering Information ....................................................................................... 27
Figures
Operations Manual (OM700-02) i
Figure 1: Controls and Front View..............................................................................7
Figure 2: Monitor, Rear Ports......................................................................................8
Figure 3: Connecting the Optional Touchscreen Cable ...............................................9
Figure 4: Screen Angle Settings.................................................................................10
Figure 5: Connecting Power to the Monitor...............................................................10
Figure 6: Connecting the Monitor to Your System....................................................11
Figure 7: Connecting the Stereo Speakers.................................................................11
Figure 8: Monitor Display Controls...........................................................................13
Figure 9: Buttons to Press for OSD Lockout .............................................................14
Figure 10: The OSD Main Menu...............................................................................15
Figure 11: GCX/VESA Mounting Option .................................................................21
Figure 12: Desk Stand Option....................................................................................22
ii Operations Manual (OM700-02)
Planar D6015TM Series Medical Monitor
The Planar D6015TM Series Medical Monitor is a 15-inch XGA monitor designed to be versatile, ergonomic, and easy to use. It is capable of displaying most video standards from 640x480 (VGA) to 1024x768 (XGA). The digital controls located on the front panel allow you to easily adjust the monitor’s display parameters using the On-Screen Display (OSD) menus.
Using either a VESA/GCX Instrument Mounting System or compatible mounting plate or an optional desk stand, the monitor’s small footprint allows you more room in your workspace for other peripherals. The two stereo speakers let you further expand your computer’s multimedia capabilities by connecting your system’s audio-out port to the monitor’s audio-in port.
The architecture of the Planar D6015TM Series Medical Monitor incorporates an active matrix LCD (AMLCD) panel that produces a clear display with low radiation emission, greatly reducing the radiation-related health concerns associated with CRT monitors.
Functional Description
The Planar D6015TM Series Medical Monitor consists of a low-profile molded plastic monitor head, video and audio cables, and a power supply. Options include a Surface Acoustic Wave or Resistive touchscreen with interface cable. The display shows 262,144 colors with a pixel matrix of 1024 columns by 768 rows.
The monitor is compatible with standard analog computer video signals. It is connected to the host computer through a standard 15-pin VGA connector on the bottom of the monitor.
The monitor automatically adjusts to applied video and synchronization signals to provide a stable, centered display. Additionally, user controls for brightness and tuning are located on the front of the monitor.
The monitor is certified by TÜV Rheinland according to IEC/EN60601-1:1990 +A1 + A2 for sale to the medical market. The monitor is certified by CSA International to medical standards C22.2 No. 601.1-M1990 (C US Mark) (equivalent to UL2601). The monitor is also CE marked for sale into the European Community for integration or use with medical products.
Operations Manual (OM700-02) 1
Product Features
Display Type: Color Active Matrix LCD
Control Buttons:
Function select up and Function select down ( and )
Adjustment increase and Adjustment decrease ( and )
Power on/off ( )
Adjust speaker volume directly with the Adjustment increase/decrease
buttons.
Indicators:
On-Screen Display “OSD” function
Power LED indicator is lit when the monitor is on and blinking when the monitor
Display Formats:
VGA, SVGA, and XGA
VESA DDC1 and DDC2B Plug and Play Functions
NEC PC98
APPLE MAC
1024x5l2 (special)
is in power-save/standby mode
Cleaning Instructions
The D6015TM Series Monitors will continue to operate normally while being cleaned in a fashion normal for a hospital environment. This includes cleaning with a damp (wrung out), mild soapy cloth. Protection from various chemicals used for cleaning, and protection from liquids consistent with these cleaning procedures is provided in accordance with IPX1 rating per IEC/EN60529.
The D6015TM Series Monitors will withstand non-abrasive cloths and cleaning solutions used in hospitals for like equipment. This is typically warm water and mild detergent for all surfaces or 70% IPA for the touchscreen surface. Possible chemicals include:
70% isopropyl alcohol
1.6% aqueous ammonia
Cidex (2.4% glutaraldehyde solution)
Sodium Hypochlorite (bleach) 10%
“Green soap” USP
0.5% Chlorhexidine in 70% isopropyl alcohol
Ovation®
Formula 409®
Fantastic®
WexCide®
To clean the screen, do not spray liquid cleaners directly onto the unit. Stand away from the monitor and spray cleaning solution onto a cloth. Without applying excessive pressure, clean the screen with the slightly dampened rag.
2 Operations Manual (OM700-02)
Safety Instructions
Do not place your monitor near a window. Exposing the monitor to rain, water,
moisture, or constant direct sunlight can severely damage it.
Do not place anything on top of the monitor-to-computer signal cord. Make sure the
cord is placed in an area where it will not be stepped on.
Do not apply excessive pressure to the screen. Excessive pressure may cause
permanent damage to the display.
The monitor and power supply units have no user serviceable parts inside. Refer all
servicing to qualified personnel to maintain warranty.
When using the monitor with the desk stand option, it must be placed on a flat
surface that is horizontal to ±5°.
Do not cover or obstruct the venting holes on the back of the monitor.
Store the monitor within -20° to +65° Celsius. Storing your monitor outside this
range could result in permanent damage. Please store in the original shipping carton.
If any cord or cable is frayed or damaged, immediately replace it with a another of
the same type and rating as supplied by Planar. See “Ordering Information” for part numbers. Safety and regulatory listings and certifications do not apply if other cables are used.
If the monitor has been exposed to liquid, or it has been dropped, or the case has
been damaged, it may pose a shock or fire hazard; immediately unplug it and contact customer service for assistance.
Use only Planar Power Adapter (model PPA4512UM) which has been tested and
approved for use with this monitor product. See “Ordering Information” for part numbers.
Caution: AC Adapter must be plugged into a GROUNDED power outlet.
When cleaning the power adapter, use a cloth dampened with liquid cleaners on the
outside of the enclosure only. Do not immerse product in liquid or a safety hazard could arise during use.
Do not use the power adapter in the presence of flammable anesthetics.
Disposal Information
This monitor contains cold cathode fluorescent lamps which contain a maximum of 12 mg (3 mg per lamp) of mercury. Please follow local ordinances or regulations for its disposal.
Operations Manual (OM700-02) 3
Symbol Explanations
Following are explanations of the symbols found on the monitor or power supply.
Indicates proof of conformity to applicable European Economic Community Council directives and to harmonized standards published in the official journal of the European Communities.
Tested and certified by CSA to C22.2 N0. 601.1-M1990. If this mark appears with the indicators “C” and “US” the product is certified for both the U.S. and Canadian markets, to the applicable U.S. and Canadian standards.
Tested to comply with FCC Class B standards.
Indicates that the monitor has been designed to meet low radiation standards.
Consult accompanying documents.
Tested and certified by TÜV Rheinland in accordance with EN60601-1.
Indicates protective earth ground.
For indoor use only.
Identifies the socket for headphones.
Regulatory Compliance
This monitor has been tested to comply with IEC/EN 60601-1 and IEC/EN 60601-1-2 by TÜV Rheinland and is certified by CSA International to medical standards C22.2 No. 601.1-M1990 (C US Mark).
Because many medical offices are located in residential areas, this monitor, in addition to the medical requirements, has also been tested and found to comply with the limits for FCC Class B computing devices in a typically configured system. It is the system integrator or configurer’s responsibility to test and ensure that the entire system complies with applicable EMC laws.
Planar Systems, Inc. has made great efforts to support the medical device industry, in particular medical device manufacturers and medical device system integrators. We offer state of the art color displays that are compliant with worldwide accepted medical device safety standards, and for the European market, CE-marked displays based on compliance with council directive 93/42/EEC – commonly referred to as the Medical Device Directive (MDD). The following is a summary of our qualification of these displays as it relates to compliance with the MDD.
The European Medical Device Directive requires that the intended use of a device be defined. The intended use of these displays is “to display alpha numeric, graphic and image data as inputted from any type of medical device.” These displays do not provide a measurement function in any way and it is the device/systems manufacturer’s responsibility to verify its function in the integrated device or system.
The display was classified as required by the MDD according to Annex IX of the directive and the MEDDEV guidance available at the time of classification. Because the display uses electrical energy and has no direct patient connections and – by itself – no medical utility, the display is
4 Operations Manual (OM700-02)
classified according to Rule 12 as an MDD Class I device – component or accessory. The MDD sets out that manufacturers of Class I medical devices or accessories shall satisfy the requirements in regards to design and manufacturing controls, i.e. the applicable assessment route to be used for CE-marking under the MDD and shall carry the CE-mark according to Annex XII of the directive, with no notified body annotation.
The applicable safety standards for a MDD Class I display are IEC/EN 60601-1: 1990 along with Amendments 1 & 2. To help the medical device designer evaluate the suitability of these displays, Planar has also conducted EMC testing to IEC 60601-1-2 as it can be applied. The display with its power supply alone do not represent a functional medical device. Hence, Planar has configured a minimal operating system that exercised the display. The resulting data is made available to interested parties.
This data is informative data, not certification data. Certification data must be obtained by the device or system integrator according to Article 12 of the MDD titled “Particular procedure for systems and procedure packs”. Paragraph #2 clearly outlines the device or system integrator's responsibility in this matter.
In summary, Planar Systems, Inc. is CE-marking these displays under the Medical Device Directive which establishes compliance to the basic medical safety standards. However, EMC compliance can only be accomplished in the configured medical device or system and is the responsibility of the device or system manufacturer. Planar has the necessary documentation such as IEC 60601-1 notified body and other third party test reports and certifications, a risk/hazard analysis, an essential requirements checklist, and Planar’s EC declaration of conformity.
Planar Systems, Inc. located in Beaverton, Oregon – USA is the manufacturer of these displays in the meaning of the directive. As required by the MDD in Article 14, Planar Systems, Inc. not residing in the EEA, has a European Representative, Planar Systems, Inc. – Espoo, Finland.
It is the opinion of Planar Systems, Inc. that registration of putting into commerce is the responsibility of the medical device/system manufacturer and Planar supports this requirement by providing an EC declaration of conformity. If Planar supplies a display to an end user, rather than a device manufacturer, it is the end users responsibility to assure continued compliance of the system in which the display is being integrated with the MDD.
For Vigilance reporting as required under Article 10 of the MDD, Planar Systems, Inc. will provide any information requested by a competent authority to support any reported incident investigation by such an authority.
EU Declaration of Conformity for Medical Applications
A Declaration of Conformity has been filed for this product. A sample of this document may be found in the addendum which accompanied this manual. For a copy of the Declaration of Conformity document, please contact Planar Systems, Inc. and request document number 001-0014-00 “Declaration of Conformity”.
Operations Manual (OM700-02) 5
Installation
Before you unpack your monitor, prepare a suitable workspace. You need a stable and level surface near a grounded wall outlet in an area which is relatively free of glare from sunlight or other sources of bright light. The monitor is cooled by natural convection (it has no fan). For optimum performance, do not block the cooling vents.
While unpacking the monitor, inspect it and other package contents for shipping damage that could cause a fire or shock hazard. Immediately report any shipping damage to the carrier or transportation company and contact customer service for assistance. Keep all packing material in case you need to ship or store the monitor in the future or in case of return.
After you unpack the monitor, make sure the following items are included (refer to “Ordering Information” for part numbers):
Monitor with 1.5 meter (5 ft.) monitor-to-computer video cable
1.5m (5 ft.) stereo audio cable
AC adapter with cable. (CAUTION: AC Adapter must be plugged into a
GROUNDED power outlet.) Output power: 12Vdc to a 4 pin male locking mini-din connector.
Power cord (medical grade) which connects from AC mains to AC adapter.
Touchscreen cable if monitor has touchscreen option.
This operations manual
Note: Your system provider may offer alternative cords or cables depending on the installation requirements and local geography issues.
6 Operations Manual (OM700-02)
Loading...
+ 23 hidden pages